|
|
CORALIA RANGE
structure made of polyester armed fiberglass and marine steanless steel (316L)
IP55 enclosure
differential breaker 30mA
integrated lighting
energy control in option
large choice of colour in option
electric socket single-phase or 3-phases
up to 125A
|
|
PHOCEA RANGE
distribution of water and electricity (4 sockets max)
structure made of polyester armed fiberglass
integrated lighting
differential breaker 30mA
energy control in option
colour in option
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
Containing 3Phase - 200/250A Socket Outlet, RCD protection. This pedestal is suitable for Mega Yacht berths, and can be fitted with outlets to 400A.
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
MP1100XL
Containing 3Phase - 63A Socket Outlets, together with single phase, TV, Phone, water tap and electronic kWh metering.
Stainless Steel - Aluminium.The ultimate pedestal for strength and quality.
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
MP1100XL
Containing 3Phase - 63A Socket Outlets, together with single phase, TV, Phone, water tap and electronic kWh metering.
|
|
Golden Oak Pedestals
Enhance the look of your pontoon with our 'wood effect' pedestals. The options shown here are a two way pedestal with electric and water outlets and a Pontoon Light. Manufactured from 5.0mm Fomalux with a foil laminated finish, the process involves the same procedure as used by many conservatory, replacement window and door manufacturers when making their product. The finish is therefore very resilient and well tested, ensuring longevity. All sizes of pedestal and levels of equipment can be offered in this finish.
|
|
The JOLLY TOWER model JT01 it's the most versatile retractable unit of the range; it allows to install any type of electric sockets up to 125A.
Thanks to the loading resistance of the whole structure up to 40 tons the JT01 is particularly suitable for use in places transited by heavy vehicles ( HGV areas ).
The JOLLY TOWER JT01 is composed by a fixed structure of concrete RBK 300, by a mobile part of stainless steel that includes the top cover, the boxes for the equipment with protection degree IP66 and the lifting system.
Lifting and lowering of the structure are effected by a crank handle.
This pop up unit, with round or rectangular cover, it's available completely closed or to fill with any type of flooring for a perfect integration with the surrounding environment.
|
|
Five years of development and thirty prototype models have yielded the most innovative mini-power center available. The Newport Harbor Mate represents the leading edge of Marina Power and Lighting equipment with more features than any other unit for its size. This rugged unit can be mounted on a piling, a dock box, or a pedestal. As with all Eaton's Marina Power and Lighting equipment, it meets the strict Underwriters Laboratories standards.
Main Features include:
Receptacles surface-mounted at top of unit for easy replacement and meet NFPA 303 3-14.1c's required 24" above the dock when mounted on a 30" dock box
30/50/20 amp receptacles available
Downward indirect lighting
Loopfeed copper bus bars
Easy-mounting brackets for piling, dock box, pedestal, or covered dock uprights
Phone & cable TV outlets available
Thermoplastic housing with lifetime warranty
Door hinge not pop riveted
Housing completely non-conductive
Galvanized, stainless, or aluminum pedestals available
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
Water available with pedestals
|
|
EQUINOX RANGE
Stainless steel 316L
Quick coupling watert taps or 1/4 turn taps
connection with flexible 30cm 20/27
color in option
|
|
Our primary goal in developing the T2 pedestal was to create an attractive and user-friendly supply unit for power and water at marinas, harbours and camping sites.
The pedestal is available with 2, 4 or 6 power outlets with the possibility of one- or three-phase outlets up to 32 amps. One or two water taps and a hose rack can also be installed.
The T2 pedestal is thus a complete utility supply solution - which is both simple and extremely robust.
|
|
The TallyKey T6-pedestal was developed for the supply of electricity and water in marinas and harbours.
The pedestal's elegant and maritime design makes a positive contribution to the guests' general impression of the harbour - and the choice of materials makes it robust and maintenance-free.
All T6 pedestals are supplied with lighting in the top in the form of two 11 watt low-energy bulbs, safely placed behind an impact resistant plastic cover.
The pedestal can therefore be used solely to provide elegant lighting, or in combination with the provision of power and water.
The T6's many possible combinations make it the market's absolutely most useful and flexible power and water supply pedestal.
We make the T6 to order in accordance with individual needs and wishes, ensuring that you gain the greatest possible return on your investment.
|
|
Service Utility Pillar
Your boatyard or canal location may require the most durable and vandal resistant connection pillar possible. You can have ultimate control of access to the socket outlets and switchgear by means of the lockable door. Up to four 16A 2 Pin + Earth Socket Outlets are located on the aluminium chassis with the switchgear behind a reset flap. The pillar is manufactured from 5.0mm S235 hollow section with a 300mm mounting base. 16A supply plugs can be in place in up to four outlets and the door then locked shut.
|
|
The new Terminal, developed and designed by Coelin with deep care in design and using highly advanced technologies, can be used in various sectors answering to camping, touristic seaports and generic public areas requirements and carries out distribution and control of main energy services like electricity, water, air, telephone, TV, intercom, ecc...
The simple and refined design harmonizes and integrates with landscape.
All the functions attributed to Terminal, not only as energy service provider, but also as enlightening device which is an innovation, confer a special personality in styling.
|
|
|
S 700 L is a distributing one of services constructed in satinato steel AISI 316 L with finishes or polished. The taken ones is interbloccate electrically and automatically. The contabilizzazione system comes activated through the use of a transponder in the intelligent taken one andpower.
|
|
|
Smart is distributing a compact one of services with contabilizzazione of the energy and the water, activated through transponder (arranges of identification without contact).
|
|
The new Terminal Boat, conceived and designed by Coelin in cooperation with the best industrial designers, is offering a simple and elegant line that can supplement and enrich tourist ports, piers and marinas.
It is perfectly suitable for distributing and controlling electric energy and drinkable water. Moreover, it is complete with low-consumption lamps that can light the floor surface.
A practical door with a key lock can give access to all control and protection
members. The two-face structure is completely made of AISI 316 stainless steel, which can be polished, glazed or painted to meet the customer's requirements.
Specifically conceived for extremely heavy-duty operation, it can provide for
excellent impact strength and durability.
|
|
Characteristic Electrical workers
Nominal tension: 240/400V
Nominal frequency: 50/60HZ
Nominal current: 63 To
Switch gen. max: 4P-63A-10kA
Taken max: 3P+N+E - 32 To
Morsettiera max: 16 mm2
Normative standard: EN 60947-1
EN 60439
|
|
|
S 700 L is a distributing one of services constructed in satinato steel AISI 316 L with finishes or polished. The taken ones is interbloccate electrically and automatically. The contabilizzazione system comes activated through the use of a transponder in the intelligent taken one andpower.
|
|
The Stow-away terminal is designed to distribute energy and services in general, such as water, compressed air, TV signals etc.
The structure is made entirely from AISI 304 stainless steel and then varnished with polyurethane powder coating.
A nodular cast iron cover is fixed to the upper part. It can be either normally executed or filled-up and, therefore, perfectly capable of matching the flooring.
Equipped with various services according to requirements, it is completely buried.
It can be extracted by using a crank or by means of a simple battery drill.
The area can then be walked over or crossed by heavy vehicles.
|
|
|
The distributor model "Domyna" consists of a removable external body and of an instrument-holder head made of SMC and BMC strengthened thermosetting material, hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of - 40°C to +110°C. Safeguarded against UV rays and early ageing. The body is fixed on a internal carring frame made of stainless steel. This distributor is equipped with a fixed panel on the side "B" and a shockproof polycarbonate injection molded door on the side "A" , V2 Class selfextinguishing, 4.5 mm thickness, in compliance with UL94 Standard, provided with treatment against UV rays and with injected foamed polyurethane seals. The door are opened by pulling upwards and closed by lock and key. All its metal components and its bolts and screws are of stainless steel.
|
|
|
The distributor model Geo consists of a structure made of SMC strengthened thermosetting material, hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 standard and inalterable within a temperature range of - 40°C to +110°C. The structure is fixed on a internal carring frame made of stainless steel. All its metal components and its bolts and screw are of stainless steel.
|
|
|
The distributor model Minus consist of a structure composed of elements made of SMC and BMC strengthened thermosetting material,hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of 40°C to +110°C. Safeguarded against UV rays and early ageing. All its metal components and its bolts and screws are of stainless steel.Distributor according to the EN60439 standard
|
|
|
The distributor model Aquarius consist of a structure composed of elements made of SMC and BMC strengthened thermosetting material,hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of 40°C to +110°C. Safeguarded against UV rays and early ageing. This distributor is equipped with a fixed panel on the side "B" ana a shockproof polycarbonate injection molded door on the side "A", V2 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and provided with treatment against UV rays.The door are opened by pulling upwards and closed by lock and key.All its metal components and its bolts and screws are of stainless steel.
|
|
|
The distributor model Mistral consist of a structure made of stainless steel and a top made of SMC strengthened thermosetting material painted with RAL color on request.
|
|
|
The distributor model Aquarius consist of a structure composed of elements made of SMC and BMC strengthened thermosetting material,hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of 40°C to +110°C. Safeguarded against UV rays and early ageing. This distributor is equipped with shockproof polycarbonate injection molded doors, V2 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and provided with treatment against UV rays.The doors are opened by pulling upwards and closed by lock and key.All its metal components and its bolts and screws are of stainless steel.
|
|
THE M-TECH SERVICE PEDISTAL
Finally there is a service pedestal which matches the need of the boat owneran marina operator
The boat owner requires safe and convenient power, water and lighting - perhaps even a TV and telephone or modem hook-up. Of course the marina operator needs these features too, but in addition looks for durability, ease of maintenance and cost effectiveness.
|
|
|
By inserting a transponder key or card provided with pre-paid credit into the sealed reader, the client can select an energy socket and/or water tap.The distributions will start as soon as the client will have extract his how key and continues until either all the credit available has been used or the operation is cancelled and the residual credit refunded simply by reinserting the key or card. The same electronic key can be used for other services as: access control, showers, etc. Credit detraction is scaled in correspondence to the real consumption of energy and water. Note: The distributor with pre-paid system allow to swith on automatica | | |