|
|
Drive-On Docking System
SportPort provides a safe and stable platform for easy docking, refueling and engine flushing, even a wash and wax. After playing hard all day, just drive up on the SportPort (not too fast!) and you're docked. The non-skid deck provides stable footing while the multi-chine design offers minimum resistance when docking and launching. It makes a good fit for all types of watercraft. SportPort floats with the tide and/or water level changes, so your craft is always ready when you are.
We believe your riding experience should be ALL PLAY AND NO WORK. With a SportPort system you just drive-on. These units are easily installed, 100%
non-corrosive, and maintenance free.
The NEW 500 Series SportPort is designed for the new, bigger Personal Watercraft (4 stroke PWC's). The 512 SportPort Dock is a 5' X 12' dock section that can be interlocked with like units to accommodate any number of skis. The 510 SportPort Deck is a 5' X 10' Deck that interlocks with the 512 SportPort Dock to create additional walk around space. The 255 SportPort Deck is a 2 1/2' X 5' Deck section that interlocks with the 512 SportPort Dock & the 510 Deck to create more walk around space.
SportPort products are foam filled and unsinkable. If you compare these systems to other alternatives, I am sure you will agree that our SportPort products are superior in price, quality and ease of use to anything on the market. |
|
We believe your riding experience should be ALL PLAY AND NO WORK. With a SportPort system you just drive-on. These units are easily installed, 100%
non-corrosive, and maintenance free.
The SportPort XLT is 5'4" X 11'6" is designed for standard 2 passenger Personal Watercraft and small dinghy sized boats, inflatables, kayaks, etc.SportPort products are foam filled and unsinkable. If you compare these systems to other alternatives, I am sure you will agree that our SportPort products are superior in price, quality and ease of use to anything on the market. |
|
- Unlimited configurations
- Easy and quick assembly
- Environmentally friendly
- Light, sturdy and safe
- Maintenance free (100% plastic)
- Resistant to pollution and UV-rays
- Limited Lifetime Warranty |
|
A variety of dock sections and lifts, coupled with an extensive selection of anchoring systems and accessories, make it easy to customize the system to suit your application. Later, configurations can be easily changed or added to as lives and ideas change.
|
|
FLOATING PIER OF A SPORTING CENTRE
TECHNICAL CHARACTERISTICS:
- length:10,30 m - width: 2,40 m - displacement:1.350 kg
- capacity: 70 kg/m2 - free board:0,25 m
The steel frame consists of HEB 100 beams. The hot dip zinc-plated process is made in compliance with EN ISO 1461 standard; it protects the structure from the marine corrosion.
- Each frame is equipped with 4 eye-bolts, directly welded to it.
- The buoyancy is provided by plastic floats filled by expanded self-extinguishing (ISO DIS 1182.2 test method) closed cells polystyrene. The floats are assembled in group of 3 by means of anticorrosive aluminium alloy profile.
- The pontoons are supplied with row of fenders at each side. The fenders are injection moulded in anti-shock and UV resistant co-polymer polypropylene.
- Every module is equipped with mooring rings in hot moulded steel. The rings are hot dip zinc-plated and assembled to the frame by means of 2 M10 bolts.
- The Similteck resin staves are brown and dark brown colour , anti-slip, UV resistant, anti-mycotical, no splinters, no special maintenance required, similar to natural wood, with a series of unequal veins, created on purpose by a special moulding process |
|
aluminium structure
exotic rotproof wood decking
composite wood decking
polyethylene floats
aluminium floats
free board adapted according to the use |
|
Passionate about Rowing.
Partners in your sport!
Poralu Marine has been the key partner of the rowing world for over
25 years in the design, manufacture and installation of pontoons all around the globe.
Our installations have hosted numerous competitions such as the World Championships at Aiguebelette in 1997, Luzerne in 2001 and regattas at Royal Henley and Eton College in the UK. We have also equipped rowing clubs and training centers in Germany, UK, France, Israel and the USA. |
|
The mobipontoon is a product compeltement flexible.
The materials utlises are the wood Teck (golden delicious teak Wood), the aluminum of marine quality, barrier in aluminum.
Cut 1.75 X 3.5m, it will permettera you to arrange surfaces of unbounded leisures of surface and design. Moreover, it will enable you to connect many options, such as: Tents, swimming pools (voir.mobideep/mobipool), chairs and tables, salted...
Evolutionary.
Garrantie of 10ans.
Irreproachable esthetics.
Flexible.
All our products on www.mobideep.net |
|
BARGES TRIPENTE is seeking worldwide exclusive dealers under licence (USA – UK – Spain – Italia…).
Facing the saturation of yachting harbours, and the urgency to create new mooring areas, BARGES TRIPENTE FRANCE has launched a totally unpublished and revolutionary concept.
If a traditionnal mooring is limited to only one boat, the BARGE TRIPENTE allows to cater four boats. The concept of a three-sided barge multiplies the number of berths by 4, in complete security.
The BARGE TRIPENTE is self-orientating, and takes its position ideally, according to the combination of winds and currents.
The approach phase is therefore performed very securely, whatever the type of boat is used. Arriving from the back of the barge, faing the current, the mooring is done easily.
A BARGE TRIPENTE is very light, and its assembly & install are very simple, so that only two people are needed to complete its set-up.
There’s no need for a specific maintenance for the tubular structure, except regularly brushing of algae. The floor consists of removable panels, so accessing the swivel shackle and the chains is very easy, in order to verify their optimum functioning.
The modularable and modular concept provides an amazing number of possibilities. |
|
A very rigid assembly ! Prestressed modules with galvanised chains or cables. Decking : non slippery and quick water draining.
Sand color limits the heating and allows to walk bare feet without risk. Installation / dismantling very easy and quick, without heavy equipments. Easy extension or configuration changes (resell also). Environment : production concentrated on the essential,
100% recyclable.
|
|
System of hermetic manufactured
The pontoons are made of UV resistant Polyethylene of HD.
UNSIKABLE PRODUCT AND RECYCLING MATERIAL
Each pontoon han integrated attachment point. Teh different sizes enable you to use them for different designs and projects.
The rectangular pieces are 40 cm(15.7 inch) high.
The connectors are made on conical rubber pieces with threaded stainless steel
bolts permiting some movement ant inferior/superior attachment points.
Floating dock aid for boats in different sizes.
Size available by piece: 3.00x1.50x0.40 m General characteristics:
- Thickness: 0.40 m.
- Lenght: 3.00 m.
- Width: 1.50 m.
- Weight that supports: 1350 Kg.
|
|
The Atlantic System is the strongest floating system for coastal marinas. For over twenty years, its rock solid stability and distinctive beauty have impressed everyone who has seen or walked on it.
Architects and engineers around the world prefer the Atlantic System because of its design flexibility. Frame, decking and flotation can be customized to fit the requirements of almost any waterfront project.
High quality, long life and minimal maintenance make the Atlantic System your best choice for lasting value. |
|
| A GatorDock Floating Dock consists of a marine grade aluminum frame platform supported by floats. These docks (also called pontoons) are usually joined to the shore with a gangway that rests upon the dock on rollers, to adjust for the vertical movement of the dock. The dock is usually held in place by vertical poles embedded in the soil under the water or by anchored cables. |
|
The beauty of your home can extend right to the side of your boat with Gator Dock Elite solutions. Elite docks bring the balance and security of a full float along with the style of walking along your deck or poolside. Designed with superior engineering and aesthetics in mind, the docks are the pinnacle in style and luxury for your waterfront.
Elite docks bring the balance and security of a full float along with the style of walking along your deck or poolside. Designed with superior engineering and aesthetics in mind, the docks are the pinnacle in style and luxury for your waterfront.
Choose from an assortment of colors and styles to match your lifestyle. |
|
Majestic Pontoons are the ideal solution for individual moorings for villas, hotels, diving centres, and locations where a full jetty is inappropriate. They have been installed with great success in both open water and sheltered areas.
Standard Range
- 12m x 2.50m x 0.85m
- 12m x 3.00m x 0.85m
- 12m x 3.50m x 0.85m |
|
Steel pontoons with plastic floats
Length 7,12m.
Width 2,00m - 2,40m - 3,00m.
Noiseless, subdued walkway-connections.
Unsinkable floats.
Step less adjustment of the fingers.
Wooden cover divided into 4 sections for easier inspections and maintenance.
Gives a good flow-through of water in the harbour. |
|
| A Fishbone style dock is a multi-slip dock that has slips on either side of a central walkway. A 'Fishbone Style' design is typically the most efficient use of space to allow for the maximum number of slips within an area and the most cost efficient from a price perspective. This layout is typically used when a multi-slip dock extends perpendicular to the shoreline. Anchoring for this style of dock is typically achieved with pilings or cables and dead weights. |
|
| E-Shaped layouts align slips along one side of a central walkway. This style is typically used on occasions when a dock runs parallel with the shoreline or other obstruction. Anchoring this style of dock is typically achieved with stiff arms or pilings, although other methods can be used. |
|
The Tide Master System
has agrowing reputation for excellence among international marinas. International developers prefer the Tide Master export kit for economical shipping and installation. Precision manufactured frames and components assure fast, accurate assembly on site.
The unique laminated web beam design rides the waves and resists structural fatigue. Superb rough-water performance assures longer life in demanding wave climates.
Resilient strength, deluxe components and multiple purchase options add up to an exceptional coastal marina system. |
|
A very rigid assembly ! Prestressed modules with galvanised chains or cables. Decking : non slippery and quick water draining.
Sand color limits the heating and allows to walk bare feet without risk. Installation / dismantling very easy and quick, without heavy equipments. Easy extension or configuration changes (resell also). Environment : production concentrated on the essential,
100% recyclable.
|
|
| The V slide jetski port can be adjusted to both Sunnydock and Rotodock giving you a freedom of choice. You do not have to buy 2 jetski ports for different floating platforms. |
|
Hermeticatty sealed fabrication process:
These pontoons are made of UV resistant high density polyethylene
UNSIKABLE PRODUCT AND RECYCLING MATERIAL
Each pontoon han integrated attachment point. Teh different sizes enable you to use them for different designs and projects.
The rectangular pieces are 40 cm(15.7 inch) high.
The connectors are made on conical rubber pieces with threaded stainless steel
bolts permiting some movement ant inferior/superior attachment points.
Floating dock aid for boats in different sizes.
General characteristics:
- Thickness: 0.40 m.
- Length: 3.60 m.
- Width: 1.50 m.
- Weight that it supports: 1200 Kg.
|
|
| SUNNYDOCKs are single modular units made of polyethylene. The units can be interlocked to form any floating structure that is desired. The dimension are 50cmby 50 cmby 40 cm. SUNNYDOCKs are durable, maintenance free, convenient, safe and enviromentally friendly. |
|
| RotoDock is the answer for almost all application. The Roto Dock system is as varied and versatile as the waterways to which it provides access. From commercial functions to personal recreations uses, our modular designs and easy-to-use storage and launching components allow you to create the ideal dock for your needs and environment. You can even add to your dock later should your needs change. |
|
POLYDOCK is the answer for almost all application. The POLYDOCK Dock system is as varied and versatile as the waterways to which it provides access. From commercial functions to personal recreations uses, our modular designs and easy-to-use storage and launching components allow you to create the ideal dock for your needs and environment. You can even add to your dock later should your needs change.
The POLYDOCK has 2 main part , one is main base and second part is the lid. You can decide what type or color lid you want to install on the base. You can have the lid in any color or you can install wood lids on the main base. consideration on hot summer days.
|
|
A very rigid assembly ! Prestressed modules with galvanised chains or cables. Decking : non slippery and quick water draining.
Sand color limits the heating and allows to walk bare feet without risk. Installation / dismantling very easy and quick, without heavy equipments. Easy extension or configuration changes (resell also). Environment : production concentrated on the essential,
100% recyclable.
|
|
|
|
