|
|
LED Mega Beam - Ultra reliable LED floodlight featuring ultra low power consumption (only 7W), suitable for applications subject to high vibration. This floodlight is completely sealed and pre-wired with 2m of marine cable and is the ideal 'fit and forget' unit.
HID Floodlamp - More light, greater safety, less power consumption than halogen bulbs, longer life and proven reliability in tough working conditions. Hella marine HID floodlights use the new D2S Xenon bulb that provides up to 5 times the service life of traditional bulbs. Due to Hella's advanced 'Free Form' reflector technology, the HID deck floodlight has a light output 2.5 times greater than halogen floodlights. Available with integrated or remote ballast.
|
|
|
This light can be surface mounted in areas needing low level lighting and for general lighting on smaller boats. The screwed bezel is machined stainless steel 316 L and available with a clear or frosted glass lens. This light uses the best quality materials and is designed for longevity and tested for water tightness to IP65. The DV12 is available with a MR11 lamp option as well as LED's with single and uniquely multi colour options. One colour can give mood lighting while the other more functional. It is available in cool white, warm white, red, blue as well as red/white and blue/white in 12 and 24 volt.
|
|
|
This light can be surface mounted in areas needing low level lighting for steps, walkways, doorways and for general lighting on smaller boats. The bolted bezel is machined stainless steel 316 L and ensures a strong exterior for exposed areas. It is available with a frosted lens. This light uses the best quality materials and is designed for longevity and tested for water tightness to IP65. DV26 is available in 12 volt LED cool white, warm white and blue.
|
|
MR11 and MR16 Surface Mounted Lights
The exterior MR11 and MR16 deck lights are surface mounted and have been tested to IP65. The lights are available in two different sizes with a screwed or bulkhead fitting. Both lights are manufactured in a polished stainless steel and can be installed in most places which need direct lighting.
Application: Decks, bulkheads and overheads
Bulbs: Halogen low voltage
Power Supply: 12/24 volts. MR 16 35 watt maximum and MR11 20 watt maximum
Casing Material: Polished Stainless steel
Lens: Clear
|
|
aqua signal KIEL - Floodlights in high-quality plastic
Voltage:
12 V, 24 V
Housing:
black or white, shock resistant, non-corrosive, non-magnetic, seawater resistant
Electric:
Cable max. dia. 7 mm / 0.28’’
Authorisation:
CE
|
|
aqua signal ISLAND – effective
Voltage:
12 V, 24 V, 230 V
Housing:
Stainlees steel, powder coated white, non-corrosive, non-magnetic, seawater resistant
Diffuser:
Clear safety glass
Protection:
IP 67
Electric:
Cable entry brass M18 x 1,5 MGCG, 1,5 m cable
Authorisation:
CE
|
|
Taken from a selection of our Exterior downlights and Specials.
Provided we are aware of the application in which the light is to be used we can modify the fixtures to work as deck uplighters.
|
|
Forespar® now offers two mast light systems of superior quality. Model ML-1 is a deck light designed primarily for installation on the mast just below the spreaders. Model ML-2 is a combination deck-bow light with separate switching, to be mounted on the forward part of the mast.
ML-1 & ML-2 lights feature a durable molded polymer housing assembly with a readily adaptable wraparound mounting apron to accommodate virtually any mast surface curvature. For 12V systems. Replacement bulbs are available from Forespar® and most marine dealers.
|
|
- Bracket, surface, tower and flush mounting
- 45º
- x 20º
- flood beam pattern
- 3" x 5" Bulb
- Internal weather-proof wire splicing - no connectors required
- Vertical and horizontal head adjustment
|
|
MR 16 Adjustable Downlights
This exterior adjustable downlight has been installed on many yachts and is designed for exterior use.
Application: Exterior overheads
Lens: Clear or frosted
Type of bulb: M16 Halogen lamp. Maximum 50 watts
Power Supply: 12/24 Volt or 120/230 Volt with an external transformer
Bezel Material: Polished stainless steel
|
|
Oval Low/High Level Adjustable Flood Lights
This oval low or high level lights with twin flood lamp can be installed almost anyway except exposed areas or below the ‘maindeck’. This versatile light could also be used as a down light.
Application: Decks, overheads and bulwark lights
Bulbs: Two MR11 20 watt halogen lamps. Maximum total 40 watts or 3 x 8.5 watt lamps
Power Supply: 12/24 Volts and 120 or 230 Volts is available with and external transformer
Bezel Material: Polished Stainless steel
Lens: Clear or frosted glass
|
|
PAR 30
The PAR 30 floodlight can be surface or flush mounted. The flush requires an insert which is welded into the superstructure. The bolted stainless steel bezel can house 4mm or 15mm thick glass. The 15mm glass is recommeneded for areas exposed to heavy weather. The PAR 30 can also be supplied with a screwed bezel type is recommended for deck head downlighting.
Application: Decks and masts
Bulbs: Metal Halide 70 or 150 watt and Halogen 100watt
Reflectors: Multiple choice with beams of 8, 24 and 45 degree angles
Power Supply: Metal Halide – 120/230 Volt AC
Halogen – 12/24 Volt DC or 120/230 Volt AC (transformer)
Lens: Available in 4mm or 15mm toughened glass
Bezel Material: Polished stainless steel
|
|
MR16 Low and High Level Flood Lights (S3025B and S3052S)
This particular light is available with two different depths of glass. The light with the 4mm thick glass bezel is suitable for fitting into exterior deck heads and superstructure not exposed to heavy weather. For areas exposed to heavy weather, the light is fitted with a 15mm glass bezel. Installation requires an insert, available in both aluminium and stainless steel, so the lights is flush.
Application: Decks, steps and masts
Types of Bulb: Halogen, MR16 50 watt maximum.
Power Supply: 12/24 or 120/230v which requires a transformer
Insert Material: Aluminium or stainless steel
Bezel Option: Bolted or screwed
Lens: Clear or frosted, 4mm or 15mm thick available
|
|
aqua signal BREMEN - watertight portable searchlight with morse facility. Two mounting brackets available as extra application inside and outside.
Voltage:
12 V, 24 V
Housing:
rubber black, shock resistant, non-corrosive, non-magnetic
Protection:
IP 68
Electric:
Switch on/off, cable 3 m/10’ 2 x 0.75 mm²
Authorisation:
CE
|
|
Remote Controlled Searchlights
The advantage of the Remote Control is that it allows you to direct the light in the best location for maximum effectiveness. They are an increasingly popular addition on power boats, helping locate buoys, moorings and channel markers. Control is by joystick or touchpad. Secondary remote control kits can be bought for most models which allow control from either the flybridge or main helm.
|
|
- Constructed of noncorrosive materials.
- Sealed beam halogen lamp.
- Long life gear drive.
- Low amp draw.
- Patented clutch mechanism prevents motor damage when running against limit stops.
- Remote Control and 15' cable included.
|
|
- Dual lamp design provides redundancy, reliability-works when you need it
- Bright, powerful halogen beam with 3° h x 5° w beam spread
- Easy-to-install Point Pad™-style joystick control
- Robust, function-and feature-rich searchlight is easy to install
- 7-wire wiring harness, 17' length
- Electronics located in water-resistant light head, instead of traditional light base location, for protection from water accumulation
- 45° down pitch ocular design provides enhanced visibility when docking
- 18° up pitch to illuminate draw bridge towers, etc.
- Lamps easily replaced by removing top cap to access rear light assembly
- Desiccated filter dries air; protects reflector and light assembly
- Innovative "direct drive" system eliminates uncontrolled light movement in choppy conditions
- Heavy-duty gear teeth and electric motors
|
|
- Internal elevation mechanism provides pitch control of spotlight beam; protects elevation mechanism from weather
- Includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on system; surface/flush mount options included
- Rugged triple-primed and sealed, marine grade aluminum housing
- XRCiZ™ feature rotates and moves light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional
- Salt water-resistant construction with nylon and phenolic washers, aluminized stainless steel screws with insulating lubricant
- Wiring harness included
|
|
|
Popular with firefighters and adventure seekers. The unique easy slide thumb switch on the StealthLite 2400 is easy to operate, even with gloves. The tough resin body is corrosion proof and resistant to extreme temperatures. The Xenon lamp is powered by 4 AA alkaline cells (included) for a bright beam that penetrates thick smoke, fog, and dust. Attach the StealthLite to one of our optional helmet light holder clips and you have a hands-free light for work or play. Certified to ATEX Zone 2 (Category 3). Submersible to 150 meters.
|
|
This one is built to last. The unbreakable ABS body resists chemicals, water and corrosion. The polycarbonate lens and focused Xenon lamp module produce a tight white beam that penetrates smoke and fog. The PeliLite 1800 is submersible to 150 meters, thanks to the o-ring seal and twist on/off lens shroud that eliminates leaky switches. It is powered by 2 C akaline cells. Certified to ATEX Zone 2 (Category 3).
|
|
Unlike other torches in the market that have a yellowish beam, the MityLite 1900 uses a hi-intensity Xenon lamp that produces a powerful, bright beam. Use this compact torch to cut through thick smoke, fog, and dust. It is submersible to 150 meters and comes with a twist on/off lens shroud. The 1900 is ideal for any situation. Powered by 2 AAA alkaline cells. Certified to ATEX safe for use in hazardous Zone 1 (Category 2) locations.
|
|
|
This powerful torch was designed with one big goal: SAFETY. The SabreLite 2000 carries more approvals than any other torch on the market today making it extremely safe. The SabreLite is o-ring sealed with a twist on/off lens shroud and comes with a polarity battery guard tray that safeguards against dangerous "outgassing" of hydrogen from an accidentally reversed cell. It is powered by 3 C alkaline cells, submersible, and has an ABS resin body which resists chemicals, corrosion, and extreme temperatures. Unlike ordinary torches with yellowish beams, the SabreLite's incredibly bright Xenon lamp produces a powerful collimated white beam of light. Peli's SabreLite is the leader in quality and performance. Certified to ATEX Zone 2 (Category 3).
|
|
More light output than a powerful flashlight, the 14W HID PowerLight(tm) is better described as a Personal Searchlight(tm). The PL14 (14W), produces 800+ lumens of true white light, in a 4-5° beam, with a projection distance of up to 2500 feet.
The HID PowerLight(tm) rechargeable lithium ion battery, delivers power to illuminate this powerful HID flashlight for 1.5+ hours on a full charge. It is ideal for law enforcement, border patrol, search & rescue, maritime interdiction, and long-range target identification as well as recreational activities, such as camping, hunting, hiking, aviation, or as an emergency HID searchlight anywhere.
|
|
With more light output than a powerful flashlight the 24w HID Powerlight is better described as a personal searchlight. The 24w HID Powerlight delivers 1300 lumens of 6000K bright white light, the 14w delivers 860 lumens.
HID lamps are extremely efficient and produce more than 10 times the lumen output of incandescent lights, they are more rugged since there is no filament to break. Rated lamp life, 2000+ hours. The rechargeable lithium ion battery is good for over 500 recharges and has a runtime of 110 min. (60 min. PL24/6-S), based on full charge constant on, standard temperature.
It is lightweight, water resistant and is perfect as a mobile work light
anywhere onboard the yacht or for tenders. The protective rubber lens and end caps help with shock absorption. The Powerlight comes with 90/264V AC charger that can be used anywhere in the world and for maximum versatility a 12/24V DC charger is also available.
|
|
Bright & Clear, Efficient Power Consumption, Long Burn Time!
50,000 hour ultra long bulb life!
|
|
4 LEDs of the latest generation and 8 hours
of autonomy with a brilliant white, penetrating light.
The Lumen Led uses 4 LEDs of the last generation, low energy consumption LEDs with high lighting efficiency.
The LEDs are super powered for a colour temperature of over 6.000°K, and have a working life of around 50.000 hours.
It is fitted with an electronic circuit that ensures the best power supply and protects the LEDs.
The power supply is provided by 6 C size, torch batteries providing more than 8 hours autonomy.
The underwater light has a power that is comparable with more than 50 Watts.
The metal lighting head, with its 4 LEDs and electronic circuit, is completely watertight and provides added protection against accidental
water infiltration.
|
|
|
Compact and light, very resistant torch and completely seals even in great depth. Indeed, the double O ring on the front of the porthole and the magnetic switch eliminate all the possibilities from water infiltrations even after several years of use. - Food by 3 piles half torch of 1.5 volts (type C) - Bulb with iodine of 3.8 volts - screwed Porthole with fast opening, equipped with a double O ring - Parabola with facets for a homogeneous pencil of light - magnetic Switch
|
|
|
