|
|
| The most recent model among the Moonlight series of flashlights, Moonlight Led features a 3 Watt Led bulb that produces a very powerful and concentrated light beam with a power of 5.500 °K. The performance of the resulting beam is comparable to the one produced by a standard 10W bulb. Burn time is high: 30 hours with 6 non rechargeable batteries (included). The head of the flashlight features a new design and made in alluminum with a rubber protective cover. |
|
Extremely small flashlight powered by four AA alkaline batteries with a 5W bulb. Burning time is around 1.5hrs. Minimicra features an exclusive quick release mechanism to carry the flashlight on the belt, and operates with just one hand.
|
|
Nemo 4300
Big brother to the 4200, the Nemo 4300 is the ultimate dive light. The 4300 has an unbreakable ABS body with thermoplastic over-moulded accents and polycarbonate lens. It uses a clever magnetic switch that operates outside of the body to prevent leaking. The switch can be easily removed for washing off sand and dirt. Peli's unique battery compartment design allows for optimal space utilization and negative buoyancy. A spare Xenon lamp is included and stored underneath the reflector. Submersible to 150 meters and powered by 8 C alkaline cells. |
|
| Small wonder. Small and lightweight, the Hybeam is the perfect all-purpose waterproof light for your BC pocket, dive bag, boat, car, or tent. It packs a six-watt punch with just four included AA alkaline cells, and comes with a halogen bulb and wrist lanyard. |
|
| Nova is a lightweight, compact dive light that provides up to eight hours of high-intensity light from an LED bulb. It is bright enough to be used as a primary light, and compact enough to be used as a backup. |
|
| Compact light with halogen bulb 3.5 watt, with locking switch. Double oring seal to insure a leak proof seal. Shipped lanyard. Operating depth 500ft. Uses 3 size C batteries of 1.5 volts. |
|
Body material: shock-resistant ABS
Reflector: plain
Front glass: Polycarbonate glass
O-ring type: NBR O-ring on front glass seal
Weight in air: 310 grams including 8 batteries
Weight in water: 180 grams with 8 batteries inside
Body length: 150 mm
Body diameter: 35 mm
Glass diameter: 45 mm
|
|
Batteries: recommended to use 8 stilo AA/LR6 1,5 V alkaline batteries
Body torch material: anodized aluminum alloy
Autonomy: in total 16 hours of which 3 hours at maximum power; after which, a gradual fading away of the light
Maximum operation depth: 200 mt.
Maximum diameter / lenght: Ø 65 mm / L 210 mm
Weight: 850 gr. with batteries |
|
New dive light that brings greater burn-time to the NiMH battery technology than the Accus Ni-Cad version.
General characteristics :
- Marine-quality anodized aluminum alloy body.
- Screwed reflector block for access to the bulb, the reflector, and the charging outlet.
- NiMH 12 V/ 4.3 Ah accumulator
- 30 W high-luminosity halogen light bulb G 6.35
Temperature at heat source 3200 °C
750 lumen light flux
- 50 W HLX high-luminosity halogen light bulb G 6.35
Temperature at heat source 3300 °C
1600 lumen light flux
- High-efficiency magnetic switch.
- Electronic control switch for turning on the bulb.
- Electronic control system for battery discharge that avoids "memory effect" phenomena and guarantees a maximum of charge/discharge cycles.
- Flashing red light notifies the diver that batteries are on "reserve".
- Fast, "intelligent" battery charger specific for NiMH (115 V/230 V) that permanently controls the status of the battery before and during continuous current charging in a maximum of 3 hours.
- Automatic charging halt before switching to "maintenance current" mode.
- Option for partial charging without complete discharge, to prolong the life of the batteries .
- Power light for the battery charger.
- Rechargeable thermal protection through battery charger.
- Case provided.
- Handle with white ergonomic grip.
- Front shock protection
- Padded transport bag
- Provided with 30 W light bulb and 50 W light bulb
- Burn time: 50 W ā 60 min. - 30 W ā 1 H 40 min. |
|
| ... products without information |
| |
SPADE anchors are manufactured in 3 materials (Steel, Aluminium, Stainless Steel), and in 6 sizes.
Plough shaped anchors are designed to plough sea floors. SPADE anchors by name, and by action, dig deeply into the sea floor. Once they are within the sea floor, the concave shape of SPADE anchors compact the sea floor, and thus not to move! This design is unique.
The remarkable efficiency of a SPADE anchor is due to the size, and shape, of its effective surface : SPADE anchors of the same surface area will have the same holding power, no matter the material they are made of. All models meet the seven safety criteria :
1. The anchor digs in rapidly, regardless of the type of sea bottom.
2. The anchor buries itself deeply within the bottom.
3. Once set, the anchor gives the maximum holding power without dragging.
4. If the traction force exceeds the bottom holding characteristics, the anchor offers constant, and maximum, resistance to dragging - even if it moves under extreme load.
5. The anchor keeps on holding, regardless of the shift in direction of either the wind or the current.
6. The anchor design doesn't allow the anchor rode to become snagged by the anchor.
7. The anchor is built strongly enough to withstand very high loads.
|
|
... see all the products in the category
Anchors
|
Savage Marine was the first company in the world to produce linear illumination fibre optic nameboards and logos, and in the last 4 years have supplied names to over 100 major yachts.
Utilising our knowledge and expertise we have manufactured fully illuminated Mirror Polished Stainless Steel letters from as little as 47mm in height weighing only 85gms to a seven letter yacht name , 8 metres in length, with a total weight for Port and Starboard letters of 1272kgs! (or as we like to say 'No job too big - No job too small') |
|
| Highlight the name of your yacht in more than one colour with Yachtlite's RGB network regulated colour-change process. Connection to an existing DMX regulator can be arranged. Naturally, the colour change can be held at your desired colour. |
|
| Yachtlite's newest exclusive product - your yacht lettering with a high-quality saltwater-proof porcelain cover adding an extra touch of elegance and exclusiveness. |
|
| Yachtlite can handle all characters such as Japanese, Arabic, Cyrillic, and any special characters or logos and emblems. Various materials and colours optionally amplify the diversity. |
|
A new generation:
Illuminated lettering
Your yacht - a dream on the ocean's waves. Her name - meaningful and personal, mirrors you, your desires and your dreams.
The name of your yacht is symbolic and should radiantly shine and glow even at night |
|
| ... products without information |
| |
|
... see all the products in the category
Lettering
|
The Mariner is a lighted bollard that can stand from 11 inches to 96 inches tall and can be used in various applications from marina docks, to landscaped areas, around pools, golf courses, parking lots and beyond. The housing is made of engineered resin to withstand the harsh marine and land environments form Alaska to the tropics. The mariner became available in May 2007 and comes with a lifetime warranty.
Product Specifications:
Can be configured with a 5 Watt, 7 Watt or 13 Watt Fluorescent Bulb
Can be mounted to a 4 inch. PVC Pipe to get the desired height
We can supply the mounting base and painted pole for any desired height
Lifetime Warranty on the engineered resin housing
Patent Pending
UL Listing Pending |
|
Spartan II PLC - designed for automated RTM Lite with touch screen programmable interface
GlasCraft's Spartan II PLC proportioner provides all the functionality of the Spartan II Deluxe, and adds the following performance-enhancing features for increased efficiency:
Touch screen programmable interface
30 programmable injection settings
Programmable digital gel timer
Programmable digital air / solvent flush |
|
The GlasCraft Spartan II is the latest technology available from GlasCraft that is specifically designed for low-pressure injection of polyester and vinyl ester resin in Resin Transfer Molding (RTM and RTM Lite) Injection Applications. The Spartan II family comes in a variety of configurations that can be used in manual or automatic injection, depending on your needs.
The Spartan II is available in the following configurations:
Spartan II
Spartan II Deluxe
Spartan II PLC
Spartan II PLC with PAC
Spartan II PLC with PAC & RFID |
|
RTM Light technology; also known as RTM Eco, has become very popular when it comes to producing small and medium series or a large number of different parts by using a simple, low cost method.
Each industry, and above all each particular need is a unique RTM light project. Matrasur Composites' job is to propose the appropriate equipment for each application, including industrialisation solutions when production quantities increase. |
|
Mimic panel X for navigation lights and bilge pump control for motor yacht.
|
|
|
|
see the results for the following category
