|
|
Extremely small flashlight powered by four AA alkaline batteries with a 5W bulb. Burning time is around 1.5hrs. Minimicra features an exclusive quick release mechanism to carry the flashlight on the belt, and operates with just one hand.
|
|
|
The most recent model among the Moonlight series of flashlights, Moonlight Led features a 3 Watt Led bulb that produces a very powerful and concentrated light beam with a power of 5.500 °K. The performance of the resulting beam is comparable to the one produced by a standard 10W bulb. Burn time is high: 30 hours with 6 non rechargeable batteries (included). The head of the flashlight features a new design and made in alluminum with a rubber protective cover.
|
|
Nemo™ 4300
Big brother to the 4200, the Nemo 4300 is the ultimate dive light. The 4300 has an unbreakable ABS body with thermoplastic over-moulded accents and polycarbonate lens. It uses a clever magnetic switch that operates outside of the body to prevent leaking. The switch can be easily removed for washing off sand and dirt. Peli's unique battery compartment design allows for optimal space utilization and negative buoyancy. A spare Xenon lamp is included and stored underneath the reflector. Submersible to 150 meters and powered by 8 C alkaline cells.
|
|
|
Small wonder. Small and lightweight, the Hybeam is the perfect all-purpose waterproof light for your BC pocket, dive bag, boat, car, or tent. It packs a six-watt punch with just four included AA alkaline cells, and comes with a halogen bulb and wrist lanyard.
|
|
|
Nova is a lightweight, compact dive light that provides up to eight hours of high-intensity light from an LED bulb. It is bright enough to be used as a primary light, and compact enough to be used as a backup.
|
|
|
Day or night a dive light is an essential piece of dive equipment. The Aeris Vision 4C Light is designed to be compact, yet extremely powerful.
|
|
|
Compact light with halogen bulb 3.5 watt, with locking switch. Double oring seal to insure a leak proof seal. Shipped lanyard. Operating depth 500ft. Uses 3 size C batteries of 1.5 volts.
|
|
Body material: shock-resistant ABS
Reflector: plain
Front glass: Polycarbonate glass
O-ring type: NBR O-ring on front glass seal
Weight in air: 310 grams including 8 batteries
Weight in water: 180 grams with 8 batteries inside
Body length: 150 mm
Body diameter: 35 mm
Glass diameter: 45 mm
Switch: relay triggered by mechanical device
Color temperature: 3100° kelvin
Light: concentrated beam
Batteries: 1.5 V A-A (R6) alkaline or 1.2 V same size rechargeable
Maximum depth: 100 meters
Burn time: up to 250 minutes (depending on the type of batteries used)
Miscellaneous: switch lock, string included; antislip thermorubber ring nut cover
|
|
Batteries: recommended to use 8 stilo AA/LR6 1,5 V alkaline batteries
Body torch material: anodized aluminum alloy
Autonomy: in total 16 hours of which 3 hours at maximum power; after which, a gradual fading away of the light
Maximum operation depth: 200 mt.
Maximum diameter / lenght: Ø 65 mm / L 210 mm
Weight: 850 gr. with batteries
|
|
New dive light that brings greater burn-time to the NiMH battery technology than the Accus Ni-Cad version.
General characteristics :
- Marine-quality anodized aluminum alloy body.
- Screwed reflector block for access to the bulb, the reflector, and the charging outlet.
- NiMH 12 V/ 4.3 Ah accumulator
- 30 W high-luminosity halogen light bulb G 6.35
Temperature at heat source 3200 °C
750 lumen light flux
- 50 W HLX high-luminosity halogen light bulb G 6.35
Temperature at heat source 3300 °C
1600 lumen light flux
- High-efficiency magnetic switch.
- Electronic control switch for turning on the bulb.
- Electronic control system for battery discharge that avoids "memory effect" phenomena and guarantees a maximum of charge/discharge cycles.
- Flashing red light notifies the diver that batteries are on "reserve".
- Fast, "intelligent" battery charger specific for NiMH (115 V/230 V) that permanently controls the status of the battery before and during continuous current charging in a maximum of 3 hours.
- Automatic charging halt before switching to "maintenance current" mode.
- Option for partial charging without complete discharge, to prolong the life of the batteries .
- Power light for the battery charger.
- Rechargeable thermal protection through battery charger.
- Case provided.
- Handle with white ergonomic grip.
- Front shock protection
- Padded transport bag
- Provided with 30 W light bulb and 50 W light bulb
- Burn time: 50 W à 60 min. - 30 W à 1 H 40 min.
|
|
| ... products without information |
| |
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED
|
|
Docks, pilings, marinas, waterside restaurants and houses can now experience the underwater lighting phenomenon with our DV24 dock light. The light has a PVC housing with a 100 watt halogen lamp and is available in 12 volt a.c./d.c. The reflector is a 45 degree wide angle for maximum light output. The dock light is fastened to a flat surface by way of two mounting brackets. The light is fully submersible and IP68 rated.
|
|
The triple LED dock light (Ref. S40351) uses three 3 watt LED’s. The light is IP 68.
If this light is to be used underwater, the driver required is S41105 for each individual light.
If this light is to be used above water, the driver required is S41104 for every 2 lights.
|
|
These solar lights are mounted on top of a sturdy steel base, housed inside an attractive,Colonial style 12" tall, 4" wide vinyl pillar. Easy to install and NO WIRES. These decorative and functional dock accessories will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes.
Each kit includes, pillar, stainless steel cleat, mounting base, solar light and rechargeable batteries.
|
|
HEAD BLINKER
The head blinker is installed at the pier head to signal its presence.
The lamp, RINA homologation, is placed at 2,5 m elevation from the deck, on the top of a hot dip galvanised steel support, aesthetically pleasant and well integrated in the overall plant. Electronic flickering and dusk switch can be provided upon request.
|
|
|
From the standard 360 degree low glare option to the modern looking quad head, we are confident we have a light for every occasion. Our solar powered marker lights are ideal for marking out hazardous edges and areas along quaysides, access bridges, pontoons, mooring fingers, footpaths, road ramps, etc. Illuminated pier identification bollards and access bridge lights are included in our extensive range of lighting products.
|
|
During the day the solar panel collects the sun's energy and charges the batteries. At nightfall, Solar Dock Lite's sensor automatically turns on the super bright LED. With multiple units your dock will provide an elegantly lit pathway for all to walk on. This unit is hands free and energy efficient! Lasts 18 hours on a full charge and is brighter than conventional solar garden lights! Just place it on your dock post and you are ready to go!
Your dock was an expensive investment and we encourage you to protect it from unwanted boating collisions. Lining your dock with Dock Lites isn't just for looks. It adds safety as well. Ask your insurance company about discounts on your umbrella insurance for protecting your dock with Dock Lites™!
|
|
The Mariner is a lighted bollard that can stand from 11 inches to 96 inches tall and can be used in various applications from marina docks, to landscaped areas, around pools, golf courses, parking lots and beyond. The housing is made of engineered resin to withstand the harsh marine and land environments form Alaska to the tropics. The mariner became available in May 2007 and comes with a lifetime warranty.
Product Specifications:
Can be configured with a 5 Watt, 7 Watt or 13 Watt Fluorescent Bulb
Can be mounted to a 4 inch. PVC Pipe to get the desired height
We can supply the mounting base and painted pole for any desired height
Lifetime Warranty on the engineered resin housing
Patent Pending
UL Listing Pending
|
|
| ... products without information |
| |
SPADE anchors are manufactured in 3 materials (Steel, Aluminium, Stainless Steel), and in 6 sizes.
Plough shaped anchors are designed to plough sea floors. SPADE anchors by name, and by action, dig deeply into the sea floor. Once they are within the sea floor, the concave shape of SPADE anchors compact the sea floor, and thus not to move! This design is unique.
The remarkable efficiency of a SPADE anchor is due to the size, and shape, of its effective surface : SPADE anchors of the same surface area will have the same holding power, no matter the material they are made of. All models meet the seven safety criteria :
1. The anchor digs in rapidly, regardless of the type of sea bottom.
2. The anchor buries itself deeply within the bottom.
3. Once set, the anchor gives the maximum holding power without dragging.
4. If the traction force exceeds the bottom holding characteristics, the anchor offers constant, and maximum, resistance to dragging - even if it moves under extreme load.
5. The anchor keeps on holding, regardless of the shift in direction of either the wind or the current.
6. The anchor design doesn't allow the anchor rode to become snagged by the anchor.
7. The anchor is built strongly enough to withstand very high loads.
|
|
Today it is proven that the high behavior of the anchors of navy to strong penetration raises more geometry than of the weight.
Three times lighter than a traditional anchor, the anchor FOB LIGHT facilitate the operations of traditional mooring or empennelage.
FOB the LIGHT is made out of alloy of aluminum, magnesium and titanium, and is treated thermically to have the mechanical resistance of steel.
Ideal for:
. 2nd mooring, associated with a leaded rope
. A frequent use and without tiredness for all the family
|
|
... see all the products in the category
Anchors
|
|
|
see the results for the following category
