|
|
Interior dimensions:
42.5 x 28.4 x 15.5 cm
(16.75" x 11.18" x 6.12" )
- Watertight, crushproof, and dust proof
- Easy-open, double-step latches
- Open cell core with solid wall design - strong, light weight
- O-ring seal
- Automatic Pressure Equalization Valve
- Comfortable, rubber over-moulded handle
- Stainless steel hardware and padlock protectors
- Pick 'N' Pluck™ with convoluted lid foam
- Personalised nameplate service available
- Unconditionally Guaranteed
|
|
Interior dimensions:
76.2 x 63.5 x 38.1 cm
(30.01" x 25.02" x 15.00" )
This case has internal wheel and/or handle wells that will reduce usable area. Please review for each application
- Watertight, crushproof, and dust proof
- Easy-open, double-step latches
- Open cell core with solid wall design - strong, light weight
- O-ring seal
- Automatic Pressure Equalization Valve
- Large, fold-down handles for 2 person lift
- Stainless steel hardware and padlock protectors
- 3 layer Pick 'N' Pluck™ foam with convoluted lid foam
- Personalised nameplate service available
- Unconditionally Guaranteed
- Retractable extension handle
- 4 strong polyurethane wheels with stainless steel bearings
|
|
Interior dimensions:
18.4 x 12.1 x 7.8 cm
(7.25" x 4.75" x 3.06" )
- Watertight, crushproof, and dust proof
- Open cell core with solid wall design - strong, light weight
- O-ring seal
- Automatic Pressure Equalization Valve
- Stainless steel hardware
- Pick 'N' Pluck™ with convoluted lid foam
- Unconditionally Guaranteed
|
|
Interior dimensions:
106.6 x 55.9 x 38.3 cm
(42.00" x 22.00" x 15.10" )
- Fits M4, M16 weapons
- Fast loading, lockable metal cross bar
- Hi-density foam tray option for 10 weapons with scopes
- Rigid polyethylene tray option for 12 weapons
- Detachable halves serve as mobile weapons racks
- Humidity gauge changes color above 40%
- 4 heavy duty wheels for one-man mobility
- Manual Pressure Equalization Valve
- Watertight, crushproof, and dust proof
- Open cell core with solid wall design - strong, light weight
- Easy-open double-step latches
- O-ring seal
- Unconditionally Guaranteed
|
|
1080 HardBack Case
Interior Dimensions:
32.5 x 24.9 x 4.3 cm
(12.80" x 9.80" x 1.70")
- Resistant to knocks, water and dust
- Moulded plush foam liner - protects notebook from impacts and scratches
- Easy snap anodized aluminum latch
- O-ring seal
- Vent with Gore-Tex™ membrane for auto pressure balance
- Comes in two attractive color combinations - charcoal grey with silver latches or completely black
- Unconditionally Guaranteed
- Fits notebook computers up to 31,2 x 23,6 x 3,6 cm
- Will hold up to 24 x 31 cm and A4 documents
|
|
6"x 8.5" Keep your cell phone and other small necessities dry in our watertight "DryBox". Available in Black only.
|
|
|
The new Poly Planar RM-10 Radio Mount is designed to accommodate today%u2019s larger front panel format Marine radios as well as older DIN style and Post mount. Made from heavy wall ABS plastic, the RM-10 has room for all the accessory cables found on the newest radios. Accepts Poly Planar, Sony, Jensen, Marine AV and even Clarion CMD4!
|
|
|
Install virtually any auto or marine stereo on your boat without fear of damage from moisture, corrosion or UV rays. The WC400 is waterproof housing that surrounds your stereo on all sides for maximum protection. A gasket-sealed, polycarbonate splash cover on the front of the rugged ABS enclosure prevents water from entering. The hinged cover lifts easily and remains out of the way in any of several positions. When open, it maintains partial splash protection while still allowing access to stereo controls. Wires and a rear connector let you hook up the stereo and antenna through the housing. A gimbal mounting bracket permits installation above or below the dash, under an electronic box or on any convenient horizontal surface.
|
|
Interior dimensions:
13.5 x 9 x 4.3 cm
(5.31" x 3.56" x 1.68" )
- GREAT FOR RUGGED SPORTS - NOT FOR SWIMMING OR SUBMERGING
- Water resistant, crushproof, and dust proof. Not for swimming or diving.
- Easy open latch
- Rubber liner for extra protection doubles as o-ring seal
- Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
- Stainless steel hardware
- Lanyard
- Unconditionally Guaranteed
- Available in solid colour or clear with coloured liner
|
|
|
|
|
|
|
Frejus, France – SEAVIEW by PYI is pleased to announce the release of the new Seaview Instrument Pods, which will be available in early 2010. These instrument pods are constructed with a high quality marine grade anodized aluminum base and UV resistant white ABS plastic housing. Full adjustment both horizontally and vertically is easily executed with the polished stainless steel quick release handle, easily accessible on the Seaview Pod display housing. This feature is not only functional & efficient but provides a clean, professional look in your helm station. The units special gasket ensures a water tight and secure installation. Seaview Pods are available pre-cut, un-cut or customizable to your specific application.
Seaview offers an electronic installation solution for any application on both Sail & Power boat, servicing both pleasure & commercial craft. Seaview offers a full range of standard and custom-mounting solutions for the growing market of radar, telecommunication & vision related marine products. As always, our primary goal is to provide our customers with quality products, innovative solutions & customer service second to none. Please contact Seaview for additional information or if you have any questions and visit our website to see the full line of Seaview products.
|
|
|
Rubex interchangeable hub propellers are to be used with Rubber RBX hub kits.
|
|
|
|
