|
|
These trailers are designed for fishermen and people who like to sail on lakes and rivers.
This range has a keel roller on the back and 2 very long carpeted bunks on which the boat is lying which is the best way to avoid the hull to be damaged. .
|
|
Trailers Aluminium 2 in 1
Light - for every boat shapes
a concept innovating guaranteed 3 years
boat lanching authorised
tubular aluminium structure H.R.
anti-corrosive protection by anodization
Large wheels of series 145/70 R 13
Autograissés tight bearings...
|
|
|
We sell our products to professionals only...if you are an individual, please don't send any requests. Thank you very much.
|
|
| ... products without information |
| |
Our trailers for sailing boats and keeled yachts are equipped with a keel support fixed on the frame which can be adjusted to ensure a good stability on the road, with 4 to 6 vertical support ended by rubber boards and also with an adjustable V-shape snubber on the front.
The lighting board is divided into 2 parts easily removable connected to a plug on the mudguard, avoiding connecting system to be in contact with salt water. "Keel adaptation for a draft of 0.80 m or more".
|
|
|
|
|
|
|
Con-o-lift's rugged OTR trailers deliver superior performance for the discerning long-distance carrier. These premium quality trailers are specifically designed to meet the demands of the commercial, over-the-road boat-hauler, providing superior quality, performance, and corrosion resistance.
All OTR trailers are supplied with complete hot-dip galvanizing protection for maximum service life. A complete stainless steel hardware package is provided, including pivot pins, fasteners, and hydraulic shafts and fittings.
These trailers feature 22,500 lb Dexter axles, complete with Firestone air-ride suspension, and 235/75R17.5 radial tires mounted on hot dip galvanized rims. The rugged steel frame is engineered to bear the vessel weight on 6" x 6" hardwood keel beams, while electronic overrides in the air suspension system provide a frame lift range of 13" - 21" over the crossbeams.
The hull is stabilized with six fully adjustable hydraulic arms. The arms also extend (manual extension) to accommodate deep-keel sailing vessels. In addition, these trailers are designed with rotating rear arms to provide greater flexibility.
Con-o-lift OTR trailers are also equipped with hydraulic front landing gear, designed to facilitate independent operation on the launch ramp (by means of a truck-mounted winch). The trailer includes a self-contained power unit and air-supply to allow the hydraulic functions and air brakes to operate without attachment to the tow vehicle.
These trailers come standard-equipped with wireless remote control for added convenience and safety. A manual back-up control panel for all functions is also provided in a gooseneck-mounted lockable storage cabinet.
Con-o-lift OTR trailers offer a rugged, proven solution for today's commercial hauler.
|
|
|
|
|
|
|
Con-o-lift marine hydraulic highway trailers offer superior flexibility and handling efficiency for today's commercial boat haulers and marine operations. Our hydraulic trailers are very versatile, allowing the same unit to safely handle a wide range of vessel types and sizes with minimal adjustment.
These highway trailers are constructed with a clean, open-frame design , which allows boats to be carried (and set) lower to the ground than any other trailer design. Our hydraulic expanding-width frame system (standard on all trailer models YH-5XD and larger) allows even greater flexibility.
With our trailer, the hull is supported on large adjustable pads set into the side-frames of the trailer, allowing power boats to be carried without the use of awkward slug beams or cross bars to support the keel. These rugged steel side frames are equipped with Con-o-lift's exclusive extended frame lift system for independent hydraulic height adjustment. This system provides unparalleled lift range and flexibility, and allows vessels to be carried at a near-level position on the launch ramp.
|
|
| ... products without information |
| |
|
Trailers for inflatable boats. Our models are equipped with a central axle of V-rollers and two half-moon rubber pads on the front with drop-legs for models P1M, while on the P4M and P6M models, the side fittings are replaced by multiroller ramps to support the fenders. Up from the P4M, trailers are tilting, making launching easier. The frame + axle is adjustable on all our models for maximum safety.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
