Products > Diving > diaphragm regulator

Diaphragm regulators

24 Products (boat or nautical equipment) | 12 Companies

Diaphragm diving regulator ATX200 Apeks

The flagship of the Apeks ATX regulator range and the definitive blend of style and high performance. ...

Diaphragm diving regulator VRT80 EVOLUTION Beuchat

For use in temperate or cold waters - Designed for beginners

Regulator ...

Diaphragm diving regulator LEGEND GLACIA Aqua Lung

The Legend Glacia™ is the newest member of the Legend family of regulators. It has been ...

Diaphragm diving regulator TITAN LX SUPREME Aqua Lung

The challenge to the design team was clear, "Improve upon the current Titan LX." While no one wants to "mess with success", the designers rose to the ...

Diaphragm diving regulator KRONOS Aqua Lung

The Kronos is a new regulator that offers innovative solutions to common frustrations found on ...

3 products

Diaphragm diving regulator ABYSS 42 Mares

Rugged dependability.

Abyss has long been a staple name in high performance, coupled ...

Diaphragm diving regulator PROTON 42 METAL Mares

The lightest and most compact metal regulator
- Super-compact fi rst stage
- Maximum ...

Diaphragm diving regulator ROVER 12 / ROVER 2 Mares

Performance, reliability and simplicity

Rover 12 is an excellent choice for intensive use at a Diving Center and for recreational divers who ...

1 product

Diaphragm diving regulator ELLIPSE TITANIUM/MC9 Cressi-Sub

Pairing of 2nd stage Ellipse Titanium with the 1st stage hyper-balanced ...

Diaphragm diving regulator XS COMPACT / MC5 Cressi-Sub

This regulator is made up of the new 2nd stage XS Compact/MC5,with elastomer ...

Diaphragm diving regulator ELLIPSE STEEL / MC 5 Cressi-Sub

Regulator made up of the excellent Ellipse second stage with steel ...

Diaphragm diving regulator SUPERFLOW® 350 Kirby Morgan

The SuperFlow® & SuperFlow® 350 have been the bench mark in surface supplied demand regulators for more than 40 years and remain the most popular and widely used ...

Diaphragm diving regulator REX® Kirby Morgan

The REX® regulator is an all stainless steel version of the balanced EXO® 26 full face mask regulator and is currently available on the KM-47 and KM-77 helmets only. The REX® was designed for maximum overall ...

Diaphragm diving regulator CYKLON Poseidon

The Cyklon has been the first choice of many since 1958
Introduced ...

Diaphragm diving regulator JETSTREAM MK3 Poseidon

The Jetstream Mk3 is an updated version of the classic Jetstream regulator. We have now connected a Jetstream second ...

Diaphragm diving regulator EOS FDX10 Oceanic WorldWide

Every breath is a dream come true. For over 30 years, Oceanic's R&D group has taken advantage of new materials, development of rapid prototyping, advanced computer aided design systems, objective testing, and lots of open water dives in an effort to develop a regulator with the lowest measurable ...

Diaphragm diving regulator KRONOS Sea Quest

Aqua Lung's King of Titans: Kronos is First Regulator with Lateral Deflector and Combined AdjusterRegulator deflects bubbles to the side; improves visibility and versatility
The Kronos is a new regulator ...

Diaphragm diving regulator SR1 Sherwood Scuba

SR¹+ high performance ...

Diaphragm diving regulator JUPITER SOPRAS s r.o.

Extremely compact ...

Diaphragm diving regulator R-400 II X-PERT Tusa

The R-400 First stage features a balanced diaphragm system and upgraded HP poppet assembly for ...

Related searches

Diving regulator
Regulator

Catalog search

Kirby Morgan
KM 77 REX

Here the first 5 pages from the catalogue "KM 77 REX", returning results for: diaphragm regulator

P. 73
disability or death. To sanitize the breathing system properly, the regulator cover and diaphragm must be removed so that the interior of the regulator can be cleaned and sanitizing solution can be flushed through the exhaust valve and whiskers. 1) Start removal of the regulator cover by using

P. 81
© Copyright 1970-2010 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 100428002 67 Kirby Morgan® 77 Washer Regulator body Diaphragm Exhaust valve Cover Cover Retaining Ring Port Whisker Starboard Whisker Tie Wrap Tie Wrap Exhaust Valve Exhaust Main Body Valve Seat

P. 109
washer and diaphragm. 8) Press in on the adjustment side of the main tube until the horseshoe is in the center of the regulator body then remove the horseshoe by pulling it off the main tube. 9) After removal of the horseshoe, the roller lever can be removed. Tilt the regulator towards the bent

P. 108
Diaphragm Exhaust valve Roller lever Inlet valve Horseshoe Nipple tube Main tube O-ring Adjustment lock nut Cover Cover Retaining Ring Tie Wrap Tie Wrap Exhaust Valve Exhaust Main Body Valve Seat Water Dump valve Thrust Washer Regulator Mount Nut

P. 117
) Position the regulator so the lever arm is pointing upwards. Slowly rotate the inlet nipple in clockwise until a very slight movement is noticed at the roller lever then stop. Lightly tighten the jam nut to prevent movement of the nipple tube. Note: Be certain the regulator cover, washer, diaphragm
Kirby Morgan
KM 37SS

Here the first 5 pages from the catalogue "KM 37SS", returning results for: diaphragm regulator

P. 69
the diaphragm. To sanitize the breathing system properly, the regulator clamp, screw and diaphragm must be removed so that the interior of the regulator can be cleaned and sanitizing solution can be flushed through the exhaust valve and whiskers. 1) Remove the demand regulator clamp by removing the clamp

P. 116
associated with it are easy to access. Press the cover over the diaphragm. 8) With the cover pressed tight against the diaphragm, if the regulator starts to free flow, the lever may need to be bent down slightly. If the regulator does not free flow, slowly depress the purge button until a slight free

P. 75
© Copyright 1970-2009 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 091110001 61 Kirby Morgan® 37SS Chapter 6 - SuperFlow® 350 Regulator & Exhaust System Post Dive Cleaning & Sanitizing Remove the regulator cover to inspect the diaphragm. 2) Remove the nose clearing device by

P. 98
this chapter. 7.8.3 Inspection of SuperFlow 350 Regulator Body Interior Tools Required: ¼ inch Flat Blade Attachment on Torque Screwdriver 1) Remove the demand regulator clamp by removing the clamp screw. Remove the demand regulator clamp. 2) Lift off the regulator cover and diaphragm. 3) Clean the

P. 72
out with a clean, damp rag. Do not depress the purge button while rinsing the regulator as this action will permit foreign matter back into the inlet valve and seat. Remove the demand regulator clamp by removing the clamp screw. Lift off the regulator cover and diaphragm then clean all components and swab
Kirby Morgan
KM 18/28

Here the first 5 pages from the catalogue "KM 18/28", returning results for: diaphragm regulator

P. 77
the mask thoroughly with fresh water. Turn the defogger valve knob, emergency valve knob, and regulator adjustment knob while rinsing to prevent salt from accumulating under these valves. 3) Remove the regulator clamp, regulator cover, and diaphragm. Carefully clean the regulator body, diaphragm

P. 96
) On the demand regulator remove the demand regulator clamp by removing the clamp screw. Remove the demand regulator clamp. Use only replacement diaphragms manufactured by Kirby Morgan. Use of other diaphragms may degrade performance and may cause increased breathing resistance. This can lead to fatigue

P. 112
Kirby Morgan® BandMasks® 18 & 28 98 © Copyright 1970-2010 Kirby Morgan Dive Systems, Inc. All rights reserved. Document #100720002 cedure, refer to regulator disassembly and cleaning sections of this manual. 8) When adjustment is complete, place the diaphragm and cover in place, and press

P. 72
possible, followed by a vigilant inspection of the interior of the mask to ensure that no contaminant has entered. Pay particular attention to the following parts prior to re-use; whisker, demand regulator diaphragm, demand regulator exhaust valve, exhaust valve, Tri-Valve Exhaust Valve

P. 119
properly. Never lubricate the valve. 2) Remove the clamp screw and clamp. 3) Remove the regulator cover and the diaphragm. 4) Install the new regulator exhaust valve by placing the stem of the valve in through the hole in the hub of the spokes from the outside of the regulator. Gently, using needle
Seemann Sub GmbH & Co. KG
REGULATOR MANUAL

Here the first 5 pages from the catalogue "REGULATOR MANUAL", returning results for: diaphragm regulator

P. 14
. If the free flows continues. Malfunctioning regulator. Do not begin the dive (or end it) and have the regulator checked by a SUB GEAR authorized technician. Water leak inside the regulator second stage. Dirt or malfunctioning exhaust valve or damage to mouthpiece or diaphragm. Have the regulator

P. 8
8 Adjustable Venturi Effect High speed air flow passing over the vane creates a low pressure area inside the second stage housing. This depression pulls the diaphragm inside the housing, maintaining pressure on the valve lever and keeping the valve open without requiring an additional effort

P. 7
diaphragm. The seat receives equal interstage pressure from both sides, making it react independently of tank pressure. Balanced diaphragm systems deliver a slightly lower flow than piston regulators, due to the smaller diameter air passageways. However, these differences in performance

P. 12
12 7.3 Post dive Close the cylinder valve and drain the system by pushing on the purge button of each second stage. Once the system has been depressurized disconnect the first stage regulator from the valve. All inlets must be closed with the provided protective caps to avoid the entry

P. 5
of the cylinder, it may cause freezing and subsequent malfunction of the regulator during dives carried out in low temperature conditions (lower than 10°C (50°F)). Cylinders must be transported according to local rules provided for the transport of dangerous goods. Cylinder use is subjected to the laws
Beuchat
DIVING CATALOGUE 2011

Here the first 5 pages from the catalogue "DIVING CATALOGUE 2011", returning results for: diaphragm regulator

P. 26
balanciert und mit einstellbarem Venturieffekt sowie Atemwiederstand - Gefl ochtener Supersoft- MD-Schlauch En Regulator designed for all diving conditions including cold water and deep diving - Over Balanced 1st stage diaphragm regulator - Anti freeze on both 1st and 2nd stage regulators - 2nd

P. 27
Atemregler für Tauchgänge in warmen und kalten Gewässern -1. Stufe, balanciert und membrangesteuert -4 MD-Anschlüsse und 1 HDAnschluss -Balancierte 2. Stufe mit einstellbarem Venturieffekt En Regulator designed for diving in temperate or cold waters - Balanced 1st stage diaphragm regulator - 4

P. 28
En Regulator specially designed for dives in temperate waters - Product suitable for dive centres - Piston fi rst stage - 4 MP ports and 2 HP ports - Balanced second stage with adjustable Venturi Es Regulador especialmente diseñado para inmersiones en aguas templadas -Producto concebido

P. 24
obere Ablassventile und ein unteres Ablassventil ? Regulierbarer Standard- Leistenriemen En Adjustable BC for children from 8 to 12 years of age ? 420 denier nylon/polyurethane outer shell ? 2 top dumps valves and 1 rear dump valve ? Adjustable harness and crotch strap Es Chaleco regulable

P. 42
w w w . b e u c h a t . f r X-JET REGLABLE S/M - M/L - L/XL FERSENBANDFLOSSE - AJUSTABLE - REGULABLE - REGOLABILI Réf. 154 70- Réf. 154 73- Réf. 154 71- X-Jet Réglable Fr Palme réglable bimatières à tuyères pour la plongée sportive -Voilure déclivée avec bord de fuite souple en goutte