|
|
- Housing made from high Tec polymer
- Unique curved design
- Low DC power consumption.
- Draws less than 1.3 amps @ 12 volts DC
- Low heat emission
- Designed for in water applications
- 6 x long life high output LED’s
- No bonding required
- No corrosion (no metal under water)
- Pivot bracket for easy cleaning
- 5 metre (16.2 ft) tined underwater cable
- Available in Ultra Blue, Ultra Green and Brilliant white
- Fibre glass mounting post
- I-njection moulded class reinforced bracket
- S/S mounting pins
- 2 year warranty
- Australian designed and manufactured |
|
Aqua Lights constructs our poly-carbonate housing to delivers a solid underwater illumination solution for your night time marine-life viewing.
BEST MOUNTING SURFACE: Any surface
REPLACING BULB: Can be done from within vessel
BULBS USED: (42) 5-watt LED's
LENS TYPE: Optics
CONSTRUCTION: Poly-carbonate housing with bronze mounting hardware and aluminum insert
POWER SUPPLY: 12 to 24 volts DC 5 Amp
INSTALLATION:
6" to 48" below water line (Lenses tested to a depth of 300ft) Spacing between lights is 6ft to 8ft |
|
| Hella marine introduces the new LED Mega Beam deck floodlight, providing all the reliability and power saving advantages of Hella marine LED technology. This first generation LED Mega Beam is a compact marine floodlight suitable for vessels subject to high vibration, impact and shock loads. Supplied with stainless steel mounting hardware and pre-wired with 2m of marine cable, each lamp is a completely sealed 'fit and forget' unit. |
|
The Single LED Eyeball (Ref. S40154-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B).
The front bezel is IP 68 and the rear part of the lamp is IP 44.
The eyeball of the LED can be adjustable.
One Driver (S41104) is required to power seven Single 1 watt LED eyeballs.
|
|
The Small Single LED Eyeball (Ref S40201-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C) and red (R), green (G) and blue (B).
The eyeball of the LED is adjustable.
One driver (S41104) is required to power a minimum of four and a maximum of seven 1 watt LED eyeballs.
|
|
The Fixed-Single 1 watt LED (Ref. S40211-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B)
The front bezel is IP 68 and the rear part of the lamp is IP 44.
One Driver (S41104) is required to power seven Single 1 watt LED’s.
|
|
The Fixed-Single 1 watt LED (60mm) (Ref. S40252-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B).
The front bezel is IP 68 and the rear part of the lamp is IP 44. Bezel diameter 60mm
One Driver (S41104) is required to power seven Fixed-Single 1 watt LED’s.
|
|
Sizes: 100mm
Weight: 381g
Voltage: 12v/ 24v or 130v/ 230v
Wattage: 5w/ 10w/ 20w or 25w/ 40w or LED
Lamp Type: G4 or G9 or LED
IP Rating: 66 as Standard with all Exterior Lights
Lenses:
Sandblasted
Dichroic Coloured Mirror
Clear
Additional information:
Light Outputs
|
|
| We've taken our popular 2600 and outfitted it with our Recoil LED module. What you get is a hands-free light that's extremely powerful, durable, and efficient. The HeadsUP Lite 2680 uses a 1-Watt LED that's aimed backwards into the reflector. 100% of the light is captured and aimed forward as a tight collimated beam that's as bright as an incandescent. The body is made of tough ABS resin that's corrosion proof, submersible and virtually indestructible. It is powered by 4 AA alkaline cells (included) and comes with a rubber strap for hard hat use and an adjustable cloth strap for bare head. Certified to ATEX Zone 2 (Category 3). |
|
Popular with firefighters and adventure seekers. The unique easy slide thumb switch on the StealthLite 2400 is easy to operate, even with gloves. The tough resin body is corrosion proof and resistant to extreme temperatures. The Xenon lamp is powered by 4 AA alkaline cells (included) for a bright beam that penetrates thick smoke, fog, and dust. Attach the StealthLite to one of our optional helmet light holder clips and you have a hands-free light for work or play. Certified to ATEX Zone 2 (Category 3). Submersible to 150 meters.
|
|
| This powerful torch was designed with one big goal: SAFETY. The SabreLite 2000 carries more approvals than any other torch on the market today making it extremely safe. The SabreLite is o-ring sealed with a twist on/off lens shroud and comes with a polarity battery guard tray that safeguards against dangerous "outgassing" of hydrogen from an accidentally reversed cell. It is powered by 3 C alkaline cells, submersible, and has an ABS resin body which resists chemicals, corrosion, and extreme temperatures. Unlike ordinary torches with yellowish beams, the SabreLite's incredibly bright Xenon lamp produces a powerful collimated white beam of light. Peli's SabreLite is the leader in quality and performance. Certified to ATEX Zone 2 (Category 3). |
|
Unlike other torches in the market that have a yellowish beam, the MityLite 1900 uses a hi-intensity Xenon lamp that produces a powerful, bright beam. Use this compact torch to cut through thick smoke, fog, and dust. It is submersible to 150 meters and comes with a twist on/off lens shroud. The 1900 is ideal for any situation. Powered by 2 AAA alkaline cells. Certified to ATEX safe for use in hazardous Zone 1 (Category 2) locations.
|
|
This one is built to last. The unbreakable ABS body resists chemicals, water and corrosion. The polycarbonate lens and focused Xenon lamp module produce a tight white beam that penetrates smoke and fog. The PeliLite 1800 is submersible to 150 meters, thanks to the o-ring seal and twist on/off lens shroud that eliminates leaky switches. It is powered by 2 C akaline cells. Certified to ATEX Zone 2 (Category 3).
|
|
More light output than a powerful flashlight, the 14W HID PowerLight(tm) is better described as a Personal Searchlight(tm). The PL14 (14W), produces 800+ lumens of true white light, in a 4-5° beam, with a projection distance of up to 2500 feet.
The HID PowerLight(tm) rechargeable lithium ion battery, delivers power to illuminate this powerful HID flashlight for 1.5+ hours on a full charge. It is ideal for law enforcement, border patrol, search & rescue, maritime interdiction, and long-range target identification as well as recreational activities, such as camping, hunting, hiking, aviation, or as an emergency HID searchlight anywhere. |
|
With more light output than a powerful flashlight the 24w HID Powerlight is better described as a personal searchlight. The 24w HID Powerlight delivers 1300 lumens of 6000K bright white light, the 14w delivers 860 lumens.
HID lamps are extremely efficient and produce more than 10 times the lumen output of incandescent lights, they are more rugged since there is no filament to break. Rated lamp life, 2000+ hours. The rechargeable lithium ion battery is good for over 500 recharges and has a runtime of 110 min. (60 min. PL24/6-S), based on full charge constant on, standard temperature.
It is lightweight, water resistant and is perfect as a mobile work light
anywhere onboard the yacht or for tenders. The protective rubber lens and end caps help with shock absorption. The Powerlight comes with 90/264V AC charger that can be used anywhere in the world and for maximum versatility a 12/24V DC charger is also available. |
|
Bright & Clear, Efficient Power Consumption, Long Burn Time!
50,000 hour ultra long bulb life!
|
|
4 LEDs of the latest generation and 8 hours
of autonomy with a brilliant white, penetrating light.
The Lumen Led uses 4 LEDs of the last generation, low energy consumption LEDs with high lighting efficiency.
The LEDs are super powered for a colour temperature of over 6.000°K, and have a working life of around 50.000 hours.
It is fitted with an electronic circuit that ensures the best power supply and protects the LEDs.
The power supply is provided by 6 C size, torch batteries providing more than 8 hours autonomy.
The underwater light has a power that is comparable with more than 50 Watts.
The metal lighting head, with its 4 LEDs and electronic circuit, is completely watertight and provides added protection against accidental
water infiltration.
|
|
| Compact and light, very resistant torch and completely seals even in great depth. Indeed, the double O ring on the front of the porthole and the magnetic switch eliminate all the possibilities from water infiltrations even after several years of use. - Food by 3 piles half torch of 1.5 volts (type C) - Bulb with iodine of 3.8 volts - screwed Porthole with fast opening, equipped with a double O ring - Parabola with facets for a homogeneous pencil of light - magnetic Switch |
|
| ... products without information |
| |
|
|
see the results for the following category
