|
|
Bright & Clear, Efficient Power Consumption, Long Burn Time!
50,000 hour ultra long bulb life!
|
|
4 LEDs of the latest generation and 8 hours
of autonomy with a brilliant white, penetrating light.
The Lumen Led uses 4 LEDs of the last generation, low energy consumption LEDs with high lighting efficiency.
The LEDs are super powered for a colour temperature of over 6.000°K, and have a working life of around 50.000 hours.
It is fitted with an electronic circuit that ensures the best power supply and protects the LEDs.
The power supply is provided by 6 C size, torch batteries providing more than 8 hours autonomy.
The underwater light has a power that is comparable with more than 50 Watts.
The metal lighting head, with its 4 LEDs and electronic circuit, is completely watertight and provides added protection against accidental
water infiltration.
|
|
- Housing made from high Tec polymer
- Unique curved design
- Low DC power consumption.
- Draws less than 1.3 amps @ 12 volts DC
- Low heat emission
- Designed for in water applications
- 6 x long life high output LED’s
- No bonding required
- No corrosion (no metal under water)
- Pivot bracket for easy cleaning
- 5 metre (16.2 ft) tined underwater cable
- Available in Ultra Blue, Ultra Green and Brilliant white
- Fibre glass mounting post
- I-njection moulded class reinforced bracket
- S/S mounting pins
- 2 year warranty
- Australian designed and manufactured |
|
Aqua Lights constructs our poly-carbonate housing to delivers a solid underwater illumination solution for your night time marine-life viewing.
BEST MOUNTING SURFACE: Any surface
REPLACING BULB: Can be done from within vessel
BULBS USED: (42) 5-watt LED's
LENS TYPE: Optics
CONSTRUCTION: Poly-carbonate housing with bronze mounting hardware and aluminum insert
POWER SUPPLY: 12 to 24 volts DC 5 Amp
INSTALLATION:
6" to 48" below water line (Lenses tested to a depth of 300ft) Spacing between lights is 6ft to 8ft |
|
The Small Single LED Eyeball (Ref S40201-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C) and red (R), green (G) and blue (B).
The eyeball of the LED is adjustable.
One driver (S41104) is required to power a minimum of four and a maximum of seven 1 watt LED eyeballs.
|
|
The Fixed-Single 1 watt LED (Ref. S40211-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B)
The front bezel is IP 68 and the rear part of the lamp is IP 44.
One Driver (S41104) is required to power seven Single 1 watt LED’s.
|
|
The Single LED Eyeball (Ref. S40154-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B).
The front bezel is IP 68 and the rear part of the lamp is IP 44.
The eyeball of the LED can be adjustable.
One Driver (S41104) is required to power seven Single 1 watt LED eyeballs.
|
|
The Fixed-Single 1 watt LED (60mm) (Ref. S40252-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B).
The front bezel is IP 68 and the rear part of the lamp is IP 44. Bezel diameter 60mm
One Driver (S41104) is required to power seven Fixed-Single 1 watt LED’s.
|
|
| ... products without information |
| |
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED's and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption - 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable). |
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
BSH approved LED navigation lights.
Designed and manufactured in New Zealand, NaviLED PRO lamps are a quantum leap forward in energy efficiency and durability.
Combining the latest LED and Multivolt 9-33V DC technology, the NaviLED PRO range have ultra low power consumption, just 10% of that required to run a bulb navigation lamp, just 3.2 watts.
Fully sealed in UV and high impact resistant acrylic, and pre-wired with 2.5m of marine cable, these lamps are IP67 certified making them extremely reliable.
Available in either Black or White shrouds. |
|
Compact LED navigation lamps. Pre wired and completely waterproof.
- 2 Nautical Mile Visibility
- Long service life
- Impact and vibration proof
- Low power consumption
- Multivolt 8-28V DC
- Approved by: IMO COLREG, USCG, RINA (I), ABYC A-16, NMSC
Available in either Black or White Shrouds, with clear or coloured lens. |
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable). |
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
LED (Light Emitting Diode) navigation light.
Unique and precise definition of light angles.
World wide type approval to comply with COLREG 72/EN 14744/UL 1104
Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
Completely waterproof and vibrationproof: Interior is fully filled and sealed with special potting resin.
Waterproof to IP 68+ (submersible).
Lifetime over 50.000 hours or 4.200 nights.
Low power consumption – 70 to 90% less than traditional navigation lights
Full brightness with input voltages ranging from 10 to 32 Volts.
All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
Easy to install, adaptor and screws included (when applicable).
|
|
| ... products without information |
| |
| Nova is a lightweight, compact dive light that provides up to eight hours of high-intensity light from an LED bulb. It is bright enough to be used as a primary light, and compact enough to be used as a backup. |
|
Batteries: recommended to use 8 stilo AA/LR6 1,5 V alkaline batteries
Body torch material: anodized aluminum alloy
Autonomy: in total 16 hours of which 3 hours at maximum power; after which, a gradual fading away of the light
Maximum operation depth: 200 mt.
Maximum diameter / lenght: Ø 65 mm / L 210 mm
Weight: 850 gr. with batteries |
|
| The most recent model among the Moonlight series of flashlights, Moonlight Led features a 3 Watt Led bulb that produces a very powerful and concentrated light beam with a power of 5.500 °K. The performance of the resulting beam is comparable to the one produced by a standard 10W bulb. Burn time is high: 30 hours with 6 non rechargeable batteries (included). The head of the flashlight features a new design and made in alluminum with a rubber protective cover. |
|
| ... products without information |
| |
|
|