|
|
|
|
|
|
|
Flexiteek is by far the most practical and convincing alternative to high quality teak decking. After considerable testing in tropical and European conditions, Flexiteek continues to clean easily and look like a newly laid teak deck. Its non%u2013slip quality is superb and nobody yet on first viewing or touching think it is anything other than real teak. Click here to download our brochure (PDF format)
Flexiteek is sandable with individual graining. The result is natural looking and the feel is realistic. The deck is extremely stain proof and is easily washed, even with a powerwash. For important material properties, please check out this PDF-file.
Flexiteek comes as flexible synthetic planking of continuous length, with integral caulking strip in black or white and slightly larger border planking. The planking is curved by rising its temperature slightly, whilst curving. A sunny day is sufficient, with tighter bends being induced with a hot airgun.
Flexiteek then takes up and sets in its new shape. No drilling of holes in the deck is needed. It is glued down with epoxy or polyurethane adhesive, forming a complete water tight seal.
|
|
|
TBS offer a complete range of non slip covering answering to expectations and restraint thicknesses, 2 laying process and 12 colours.
|
|
|
Teak Marine fabricates beautiful interior floors for all sizes and styles of yachts. Our unique pre-fabricated system enables Teak Marine clients to choose from a variety of exotic woods to match or build a new cabin sole. The layout for the interior can either be straight or sprung planking. Seams can be made from beautiful woods such as holly, walnut or maple.
|
|
|
|
|
|
|
Teak Marine custom-makes gorgeous decking to enhance the look, pleasure and value of your yacht.
Our teak decking systems:
. ensure a watertight fit
. all seams and joints are caulked with the finest materials available
. we custom order any thickness or width
. minimal or no screws are used in deck installations
. private label marine epoxy is used that has been tested in extreme cold and hot temperatures
The decking is available in either straight or sprung planks. The latter is made with curved battens to follow the curve of the hull or cabin house.
All of the decks are made from quarter sawn Tectona grandis - the best teak available.
The decks are shipped pre-fabricated which significantly reduces installation time and sanding as 95% of the work is done prior to shipping on our lofting floor.
Decks are available in a kit form - we will build to your template and ship a crate with all materials in. Also available in turn-key fashion where technicians will template your vessel, fabricate the deck and install it on site.
|
|
Developed specifically for the decks of boats (our Teck is now used in ZODIAC, Alubat, Alliaura, ALINGHI ...), which must be resistant to weather and water, our flooring also used on parts of land ( terrace Stairs, pool , Tiled, private dock, spa, veranda, balcony ) Where wet soil outside generates significant risk of slipping and falling.
The resulting surface flexible can also be raised and pasted bathroom.
|
|
|
Main uses: non-slip areas (boat deck, ladders,..). Packaging: 1100x1100x35mm. Thickness from 2 to 12 mm. We suggest termoformed finishing in order to increase non-slip effect
|
|
The range includes several types of laths with different profiled sections.
With this diversity, we can implement any type of coating lathing, from the simplest to more complicated, as on the image below or right curve, on gangways, with or without borders (around deck panels), with notches like ferns that are found in front of the decks of boats.
|
|
We present below, with photos, clips to put in situ, a panel Teck very complex.
circled in red on the photo you see the position of the finished panel, the top of the stairs on the starboard side of the Juppe catamaran Fountaine Pajot ATHENA 45 moored in Calvi in Corsica.
Imagine having to make this panel with real teak? feasible, but much less easy! you will then understand the best interests of our product!
|
|
The range includes several types of strips with different shaped sections.
With this diversity, we can implement any type of coating lathing, from simple to more complicated, like the image below: straight or curved, on catwalks, with or without borders (around deck panels) with notches like ferns found in front of the pontoon bridges.
|
|
|
Teck-it-Easy is an easy system based fine faux teak planks flexible paste (low thickness is 5mm, we rather speak of teak slats)
|
|
gray imitation teak deck boat
Since late 2009 we also have a material imitation teak color Gray
some pictures of what made below with our other colors of faux wood in the background.
|
|
- However, the teak is not an ideal solution: read the articles here ...
- there are teak and teak a teak nobleman of high quality now costs very expensive!
between a teak type DIY supermarket and a Burmese Teak selected to manufacture bridges Yachts, there is little comparison.
- like all wood, teak is alive, he faults (knots), there are risks of delamination and we know of new boats built by renowned sites that have problems after a season of navigation.
|
|
Hydro-Turf Cut Groove 40" x 62"
Part Number: SHT40CG
Sheet of 1/4" (5.5mm) Cut Groove Hydro-Turf. Available in all our colors. Sheets may have some small holes. This is a natural occurace in EVA material. Add 3M self-adhesive for $25.
|
|
E3 L – Deckboard made from solid burma-teak with a moulding on the outer edge
Deckboard made of teak with parallel grooves and a surrounding moulding for the outer edge.
Application: Ideal for cockpits, locker seats, hatch covers etc.
The outer edge with a moulding makes it look like a classic teak deckboard. Also suitable for curves and bows.
We manufacture according to a mold so there is no waste. We will provide the finished parts which you can glue immediately.
|
|
|
Application: Perfect for cockpits, locker seats, hatch covers etc. We manufacture according to your measurements. The first measurement determines the running direction of the mouldings. It is also possible to cut according to your mold for an extra charge.
|
|
|
TBS offer a complete range of non slip covering answering to expectations and restraint thicknesses, 2 laying process and 12 colours.
|
|
Developed specifically for the decks of boats (our Teck is now used in ZODIAC, Alubat, Alliaura, ALINGHI ...), which must be resistant to weather and water, our flooring also used on parts of land ( terrace Stairs, pool , Tiled, private dock, spa, veranda, balcony ) Where wet soil outside generates significant risk of slipping and falling.
The resulting surface flexible can also be raised and pasted bathroom.
|
|
|
Main uses: non-slip areas (boat deck, ladders,..). Packaging: 1100x1100x35mm. Thickness from 2 to 12 mm. We suggest termoformed finishing in order to increase non-slip effect
|
|
- However, the teak is not an ideal solution: read the articles here ...
- there are teak and teak a teak nobleman of high quality now costs very expensive!
between a teak type DIY supermarket and a Burmese Teak selected to manufacture bridges Yachts, there is little comparison.
- like all wood, teak is alive, he faults (knots), there are risks of delamination and we know of new boats built by renowned sites that have problems after a season of navigation.
|
|
Hydro-Turf Cut Groove 40" x 62"
Part Number: SHT40CG
Sheet of 1/4" (5.5mm) Cut Groove Hydro-Turf. Available in all our colors. Sheets may have some small holes. This is a natural occurace in EVA material. Add 3M self-adhesive for $25.
|
|
|
Apart from the hardwood timber option Solent Marine Also Offer SOL-DECK, a composite material that looks like wood, feels like wood but lasts a lot longer. It won't lose its colour either as its UV stable. Another common option is fibre-glass grating. This high-friction surface is very good at reducing slips & comes in several different colours & varieties.
|
|
|
|
