|
|
|
SEEMATZ Floodlights are made of seawater resistant aluminium, white powder coated. Every screws are made of stainless steel. Wide beam reflector made of anodized aluminium and special hardened front pane. Sealings are made of temperature resistant silicone rubber. The front frame will be closed by two stainless steel spring locks - it makes the lamp change easy! SEEMATZ Flooflights are available in different voltages from 24VDC (200W Halogen) up to 230VAC. The high-power units have the compl. ignition units direct at the rear of the case - no extern power supply will be necessary! All units are conform to secure class 1, IP67, DIN/EN 60598 and 1000 hour salt-spary test ISO1456.
|
|
Easy to change safety glass lens.
No tools required for relamping.
Terminal block for incoming wiring.
Corrosion resistant stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
Highly polished aluminum wide beam reflector.
Stainless steel hardware.
|
|
Applications : decks, holds, industrial areas, etc.
Housing : stainless steel seamless deep drawn, powder coated white
Lamps (not included) : HST/HIT lamp 70W
Mounting :adjustable bracket, stainless steel, 4 mounting holes, 2 x Ø 10 mm and 2 x Ø 14 mm
Diffuser : safety glass
Electric : 230V, flexible wiring, high temperature resistant
|
|
|
The portable luminaire is purposed for local illumination during cargo handling, assembling, maintenance works on vessels. Steel body, powder coating; protecting by a wire guard. Cable with plug. IP23, 4x60, 6x60W
|
|
- Floodlight for decks and holds, industrial and sport areas
- Integrated ballast
- Satisfy rules of maritime classification societies
Specifications:
- Floodlight for High Pressure Sodium (HS) or Metal Halide (HI) lamps with seamless housing of deep drawn stainless steel.
- The housing is powder coated white and enamelled up to 70-80 micrometer thickness. - The floodlight provides extreme corrosion resistance.
|
|
Applications : decks, holds, industrial areas etc.
Approvals : according to the relevant classification societies, additional VDE and IEC
Housing : stainless steel seamless, deep drawn, powder coated white
Diffuser/Shade : safety glass
Mounting : adjustable bracket, stainless steel, 4 mounting holes, Ø 13 mm
Cable Entry : junction box, 1 cable gland brass, M24x1.5 with earthing insert
|
|
Class 1, Division 2, Groups A,B,C,D, T1.
Class 1, Zone 2, Group II, T1.
Easy to change safety glass lens.
No tools required for relamping.
Terminal block for incoming wiring.
Corrosion resistant stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
|
|
For use in
* Zone 2
* Zone 21 and Zone 22
Max. possible lamp capacity
* high-pressure sodium lamps up to 600 W
* metal-halide lamps up to 400 W
* halogen lamps up to 1000 W
|
|
- Floodlight for decks and holds, industrial and sport areas
- Vibration compatible type of durable stainless steel
- Satisfy rules of maritime classification societies
|
|
- Floodlight for decks and holds, industrial and sport areas, illumination of water surfaces, fishing-nets, etc
- Extremely powerful and highly efficient narrow beam floodlight
- Satisfy rules of maritime classification societies
|
|
Floodlight for halogen lamps, max 1x1000W
Applications : decks, holds, industrial areas, etc.
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : stainless steel seamless, deep drawn, powder coated white
Diffuser/Shade : safety glass
Mounting : adjustable bracket, stainless steel, 4 mounting holes, 2x Ø 10 mm and 2x Ø 14 mm
|
|
Easy to change safety glass lens.
No tools required for relamping.
Terminal block for incoming wiring.
Corrosion resistant stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
Highly polished aluminum wide or narrow beam reflector.
Stainless steel hardware.
|
|
* For use in
o Zone 1 and Zone 2
o Zone 21 and Zone 22
* Lamp options
o halogen lamps (QT) up to 1000 W
o halogen metal halide lamps (HIT) up to 400 W
o sodium vapour high pressure lamps (HST) up to 600 W
* Housing in cast aluminium
* Mounting components in hot galvanized steel
* The floodlight can be adjusted in 15° or 30° increments
|
|
* Floodlight lights for helideck landing area
* For use in hazardous areas
* Rugged and low profile floodlight in acid resistant stainless steel housing (SS316L)
* Simple to install and maintain
* IP rating
* Resistant to vibrations
* Long lamp life
|
|
- Sign and escape route lighting in one unit
- Easy mounting
- Easy maintenance
Specifications:
- Sign and route lighting luminaire with body and sign plate of polycarbonate.
- Supplied with 3 different signs. May also be used for route lighting 85 lm standard; also available for route lighting 120 lm (HO). Integrated battery backup for 1 and 3 hours lighting time. LED indicator for charging function.
|
|
Applications : outdoor sign, use watertight luminaire for lighting
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : stainless steel, powder coated white
Sign : PMMA, list of standard pictograms are available, other pictograms on customers requirements
Mounting : 2 mounting holes, Ø 8.3 mm
|
|
- Allround signalling light in different colours for general warning purposes
- Seawater resistant
|
|
Features:
- Rugged Shutter producing Daylight Communications Speeds up to 180 dots and/or dashes per minute
- Marine Grade Aluminum and Stainless or Brass Option
- Silvered Glass Reflector or Polished Aluminum Option
- 360 Degree Horizontal Movement
- Universal Mounting Bracket provides Bulkhead and Stanchion (pole) mounting
- 500 to 1000 Watt Lamp Selections
- Standard Navigation Use: Options can be ordered with Local handle and Remote Pilothouse Lever Control which provide Navigational use in addition to Signalling Capacity
- U. S. Coast Guard and U. S. Navy-Approved, with assigned National Stock Numbers
|
|
Engine room, hold, laundry, store weather deck, outside passage way
|
|
|
The luminaire is purposed for illumination of open spaces. Polycarbonate body and diffuser. It is foreseen to be installed on open decks on vessels as well as in places exposed to action of sea waves. IP66/IP67, 1x18W
|
|
- Allround luminaire for industrial areas and marine installation
Specifications:
- Luminaire for decks, engine and technical rooms, as well as industrial areas.
- Housing of galvanized steel (G) or stainless steel(S).
- Galvanized steel housing is not suitable for marine outdoor installation. Stove enamelled white polyester powder finish.
- The geartray is possible to hanng on internal brackets when connecting cables and executing maintenance.
- Cover of clear impact-resistant polycarbonate (PC). Cover clips in stainless steel.
|
|
Applications : multipurpose luminaire for engine rooms, stores, etc.
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : zinc coated steel, seamless deep drawn, powder coated white
Diffuser/Shade : polycarbonate, clear
Mounting : 2 mounting holes,Ø 9 mm
|
|
|
Casing, glass holding frame, latches and brackets made of stainless steel, powder-coated (RAL9018). Hard glas pane, resistant against temperature changes. With lampholder R7s and 1m connection cable 3x2sqmm wired.
|
|
Halogen floodlight FLH is designed to achieve the highest level of durability and performance under extreme environmental conditions across a wide range of temperatures.
Housing, glass frame, mounting bracket and junction box in seawater resistant aluminium finished in white polyester coating.
Bolts and nuts of stainless steel.
Heat resistant silicone rubber gasket and hardened front glass.
Meet shock testing according to IEC 69-2-27 test Ea.
|
|
Protection class to EN 60 529: IP 56
Voltage: 24 V
Material:
- Casing: brass/red brass
- Bracket: stainless steel
Lamp: Halogen incandescent lamps
- 2x50W/approx. 1.800lm
- 2x100W/approx. 4.000lm
(not included in delivery)
Equipment:
- Heat insulating branching box
- Cable gland internal part: W10
|
|
High pressure sodium floodlight FLS is designed to achieve the highest level of durability and performance under extreme environmental conditions across a wide range of temperatures.
Housing, glass frame, mounting bracket and junction box in seawater resistant aluminium finished in white polyester coating.
Bolts and nuts of stainless steel.
Heat resistant silicone rubber gasket and hardened front glass.
Meet shock testing according to IEC 69-2-27 test Ea. 115V on request.
|
|
Voltage: 115 or 230 V
Material:
- Casing: brass/red brass
- Bracket: brass
Lamp: Incandescent lamp 100W/approx. 1380lm (not included in delivery)
Equipment:
- Cromium plated copper reflector
- Cable gland internal part: W10
|
|
|
Casing, glass-holding frame, latches and bracket made out of stainless steel, powdercoated (RAL 9018) casing. Hard glass pane, resistant against temperature changes. With branching box. With lampholder R7s. For halogen-lamp up to 500W, length ca.118mm
|
|
|
|
