|
|
|
Custom Built Grinder Stations - Built to Customer Specifications
|
|
|
It especially macerates and conditions stringent material in homogenous sludge - the Börger Multichopper.
|
|
|
The Börger Multicrusher - an effective, widely applicable twin shaft macerating maschine for solids and debris laden fluids.
|
|
The Uson One-way macerator system is designed for hygienic transportation and treatment of food waste in compliance IMO Marpol 73/78 Annex V, U.S. Coast Guard, etc.
Food waste is ground by local macerator(s) in the galley and transported by vacuum to a special holding tank, which is designed for food waste. This makes it possible to run the system when the vessel is operating within an area where discharge is prohibited.
By using this system, ship owners ensure:
Proper hygiene
Lower water consumption
Minimum the risk for blockage of food waste in the piping system
Easy installation
Smaller piping diameter
Flexible pipe routing
In addition, the ground food waste can be de-watered by a sieve and press unit and our marine grease separator takes care of the greasy galley water. The system is suitable for retrofit onboard existing vessels. The system safely handles food waste and is easy to install, with low water consumption, small pipe diameter and flexible pipe routing.
|
|
The U-80 glass crusher is an easy solution for treatment of large volumes of glass. The bottles are manually fed through the feed pipe and the glass pieces are collected in a standard 80 liter wheelie bin.
The crusher produces pieces of about 40 mm diameter which makes them acceptable for recycling. Too small pieces make it impossible to detect porcelain, which destroys the glass melt, and is therefore not accepted for recycling. The volume reduction is approximately 80%. No glass smoke is produced when crushing the glass bottles. The machine is fitted with a level indicator that stops the crusher when the bin is full to prevent overfilling.
|
|
This shredder transforms plastic bottles and aluminum cans into flakes (12 x 50 mm) which minimizes volume and enables contained residual liquid to be drained and taken care of. The inlet and collector bin are made to suit the customer requirements. The material in the knives is of homogenous extreme high
strength hardened steel. When overloaded the shredder reverses in order to turn the material, then the shredder starts again. The number of repetitions before complete stop can be adjusted in accordance with type of duty. It is equipped with an easy to use feeding hopper and its compact design makes it easy to fit in tight compartments. The volume reduction is more than 80 %.
|
|
It is well known that any different passenger vessel (Cruise or Ferry) shall have a specially designed garbage handling system.
ISIR is capable to engineer any different system that may be required and will include equipment of its own production, as well as suitable components of highest quality from the market.
|
|
|
|
