|
|
Version F1 and M1 of Struct-Core (No toxic and dense smoke emisson, AFNOR approved).
- Actually unique in the Market F1.
- Availables densities: 60, 80, 100, 160, y 380 (Kg./m³.).
- Finishing in plain sheets, double or simple contour, scrim, etc.
- Main aplications in public areas, vessels, trains, aircrafts constructions
and military uses.
|
|
New polymer thermal hardener formed with closed celule structure.
IS NOT PVC, IS NOT PUR.
- Is a rigid, extruded, foamed and crosslinked core material
- Closed and regular cell
- Wide range of densities available
- Uniform: is not necessary to use sealant pastes to cover surface irregularities
- Uniform resistances and characteristics in the whole area
- Fine cell means less resin absorption and less weight
- Low weight : same weight for one sandwich of PVC 75 and for one of STRUCT PUR 100
- Easy to handle with conventional tools
- Did not contain CFC.
- Recyclable
- No corrosion and no toxic smoke.
- Not harmful for human body
- No out gassing: no reaction in steam atmosphere and no delamination, even in sandwich construction.
- Dimensionally stable: did not change when temperature increases
- High resistance at high temperatures, even working under pressure
- High rate of thermal distortion: means reduced production cycle, increasing productivity
- Only core F1 version available in the market
- Available in M1 version
- Compatible with all resins, even the ecological ones.
- Good performance when using pre-pegs
- No standard thicknesses, we cut as required
- Available services: grooving, perforation, SCRIM,..
|
|
| BalsaMarine panels have been tested in the Laboratories of Technique du Bois in France, and it is worth noting that the resistance to deflection, or elasticity, is comparable to Okoume plywood, and even greater in the transverse direction. In addition, despite the low density, hardness is equal to about 50% compared to plywood BalsaMarine Panels, with an end grain balsa core, have been developed to provide the user with a strong, lightweight structural panel. Our Composite Panels are 4' x 8' in size and can be produced in-house with a variety of decorative veneers: Teak, Cherry, Afromosia, Maple, Teak & Holly etc. |
|
| PVC foam is a closed, inert gas filled, cellular structure. It is produced in a range of densities and thicknesses to meet required specifications. It is available as plain sheet, perforated or scored, as contour-able, scored, or scrim backed, and as custom planks. It is also available These panels are also available in 1/8—5” (3-130mm) x 4’ x 8’ (2440 x 1220mm) up to 5’ x 10’ (3050 x 1530mm). These panels are also available laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers. |
|
| PVC foam is a closed, inert gas filled, cellular structure. It is produced in a range of densities and thicknesses to meet required specifications. It is available as plain sheet, perforated or scored, as contour-able, scored, or scrim backed, and as custom planks. It is also available These panels are also available in 1/8—5” (3-130mm) x 4’ x 8’ (2440 x 1220mm) up to 5’ x 10’ (3050 x 1530mm). These panels are also available laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers. |
|
PCGA-XR1 3003 Aluminum Honeycomb
PCGA-XR1 3003 commercial grade aluminum honeycomb is a lightweight core material offering excellent strength and corrosion resistance for industrial applications at low cost. PCGA-XR1 3003 honeycomb is made from 3003 aluminum alloy foil.
PAMG-XR1 5052 Aluminum Honeycomb
PAMG-XR1 5052 aerospace grade aluminum honeycomb is a lightweight core material which offers superior strength and corrosion resistance over commercial grade aluminum honeycomb. PAMG-XR1 5052 honeycomb is made from 5052 aluminum alloy foil and meets all the requirements of MIL-C-7438.
PAMG-XR1 5056 Aluminum Honeycomb
PAMG-XR1 5056 aerospace grade aluminum honeycomb is a lightweight core material which offers superior strength and corrosion resistance over 5052 and 3003 aluminum honeycomb. PAMG-XR1 5056 honeycomb is made from 5056 aluminum alloy foil and meets all the requirements of MIL-C-7438. |
|
| ... products without information |
| |
|
|
