|
|
WAECO SinePower – sine wave inverters up to 2500 watt
Prize-winning prior to market launch: hardly surprising, the new SinePower inverter series has been able to convince the most demanding jurors. With continuous power ratings of 700 watts and more, the larger models clearly come up to professional standards. Delivering pure sine wave voltage they are the best possible choice for highly sensitive and powerful electrical appliances.
They meet industry standards and combine ultimate user comfort with even more technical features than their smaller “mates”. These features include the mains priority circuit with voltage synchronisation, which gives priority to external mains power whenever it is available, and ensures uninterrupted voltage supply to the connected devices with a “smooth” switch-over. Or the automatic activation of the sleep mode when no 230-volt appliances are being operated – an energysaving feature that reduces the strain on the on-board battery.
|
|
Living the high life on board a superyacht can require the generators to run twenty-four hours per day, something not always allowed in many harbours. However, the Shoremaster enables you to moor in the place of your choice and to connect to any local shore power connection anywhere in the world. From Barbados to St.Tropez, from Stavanger to Florida. No matter what the voltage and frequency on offer. Your Shoremaster will automatically provide the appropriate power to your on board equipment.
Supplying the power is only half the story because the Shoremaster also stabilizes and converts the incoming power for your safety and convenience. In the meantime it takes care of a safe separation between the shore power connection and on board circuits. Finally, it delivers high start-up power to counterbalance the peak load caused by the activation of air-conditioning and other equipment with a high initial power surge. All this is provided without annoying high-frequency noise.
|
|
AC-DC Voltage Converters
These power supplies, commonly referred to as 'brick in the lead' units, offer a convenient way to use 12Vdc, 24Vdc or 48Vdc equipment from alternating current supplies of between 85 to 135Vac and 170 to 265Vac. Input voltage selection is automatic and requires no manual adjustment.
The continuous power rating spans 36 to 240 watts in five models. The
nominal voltage output is factory set at 12Vdc, 24Vdc or 48Vdc.
These cool running products use switch mode technology and are assembled using surface mount technology.
The PowerMasters are continuously rated. The power output is limited at the continuous rating so that they can be used in parallel when extra power is required. The units meet the European Low Voltage Directive and the EMC Directive.
They also meet the requirements of UL1950 and FCC Class B.
|
|
This new exciting range of variants offers you, our customers an even greater product portfolio to choose from to accommodate your requirements.
During the past two years we have received requests for different variations of dc-dc voltage converters and ac-dc power supplies which we have successfully produced for a variety of applications to include the installation of wireless data terminals, radios, GPS, weighing systems on forklift trucks, motorway displays, traffic recorders, thermal printers, laptops, LCD monitors, coin collecting machines, printers on buses for end of day reporting and many more. We wanted to share these products with you so you are able to explore new opportunities.
As with all of the Alfatronix products, the range of variants are covered by our fully comprehensive “No Quibble Life Time Warranty.”
|
|
Mains Power Supplies in 12V, 24V and 48V Configurations
The AD Series units may be used to supply mobile radios and other appliances from AC mains used in offices, portable site cabins, communication cabins, telephone exchanges, remote antennae sites, ships, oil rigs etc. The units will accept either European 230Vac or US 115Vac inputs and are available as standard in 12V, 24V and 48V dc output configurations. Input is via a standard IEC-320 C13/14 power cord with UK, European or US mains plugs – please state your requirement.
Rugged and Compact
These units, often referred to as ‘brick in the lead’ supplies are housed in a rugged, corrosion resistant anodized aluminium extrusion. The low mass surface mount technology components offer excellent resistance to shock and vibration, thus further increasing the reliability of these products.A red LED indicates when there is output from the converter. This gives reassurance to the installation engineer and speeds fault finding.
|
|
|
|
|
|
|
The Mass Combi, inverter and battery charger in one, is increasingly playing a leading role in carefully designed electrical systems. Mastervolt has integrated the most advanced technology into a compact package, allowing owners to get the most value for their money. This offers you high-quality basic support for smaller systems without requiring a great deal of space. You will not have to worry anymore about the quality of shore power in any port - things will always work with the Mass Combi!
The most vital functions in your electrical system now come within reach: battery charging, supplying 230V power, switching and the use of extended AC loads to be utilized on board, even when limited shore power is available. Power can be drawn from a shore connection, generator or charged batteries. Mastervolt's three-step Plus© charging method guarantees more battery power and a longer life span. Batteries are always fully charged and fast, even when a generator is used. And the clean 230V/50Hz power supply is perfectly reliable.
|
|
|
|
|
|
|
An on board AC installation offers you a wealth of benefits by making possible the on board use of any domestic appliance, from microwave oven to hairdryer, DVD player to power tools. A Mass Sine inverter allows you to easily transform the voltage of your 12V battery to 230V/50Hz, so you enjoy all the comforts of home wherever you choose to go. And you save on the costs associated with adapting equipment.
This Mass Sine inverter converts high-output battery power to 230V/50Hz with minimum heat generation. From regular TVs to flat screens, from electric kettles to icemakers, from drinks cooler to coffee machine, everything functions perfectly. There is an automatic stand-by or scan mode for no-consumption periods. You always will have AC power, even without shore connection or generator. With a generator and battery/inverter system even higher levels of consumption become possible. Low power demand periods with the battery and inverter running and the generator idle. Have both power sources running simultaneously for maximum capacity.
|
|
12V-12V, 24V-24V, 12V-24V and 48V-12V Converters for a wide range of applications
If you need to fit 24V equipment onto a 12V vehicle, then an up converter from the DD Series offers a fast and easy way to configure your system. Or, if you need to stabilise your voltage or isolate your supply, then the DDi Series of 12V-12V and 24V-24V Isolators will suffice. There are also 48V-12V units available for telecoms and forklift truck applications.
These 12V units are ideal for small vehicle applications such as cars, minibuses, small marine craft, caravans and motorhomes and a variety of industrial uses.
12V-12V and 24V-24V units provide a stable output voltage as well as providing galvanic isolation for a variety of application.
|
|
These products offer a convenient way to operate mass produced 12Vdc equipment such as cell phones, in car entertainment, professional communication and telematics equipment, refrigerators, televisions etc. from the 24Vdc mobile electrical systems found on diesel engined vehicles and vessels.
There are 10 products in the range from 3A to 24A in isolated or common earth configurations. They have been optimised for high volume 24Vdc to 12Vdc applications such as on heavy goods vehicles, coaches, buses, construction, forestry and agricultural vehicles, commercial and leisure marine vessels.
|
|
24Vdc to 12Vdc Converters
These products offer a convenient way to operate mass produced 12Vdc equipment, such as cell phones, in car entertainment equipment, professional communication equipment, telematics equipment, refrigerators, televisions, etc. from the 24Vdc mobile electrical systems found on diesel engined vehicles and vessels and the 28Vdc systems found on aircraft.
These cool running products use switch mode technology and are assembled using surface mount technology.
All the products are CE marked, e marked and meet the requirements of
FCC Class B.
|
|
|
|
|
|
|
12V-12V, 24V-24V, 12V-24V and 48V-12V Converters for a wide range of applications
If you need to fit 24V equipment onto a 12V vehicle, then an up converter from the DD Series offers a fast and easy way to configure your system. Or, if you need to stabilise your voltage or isolate your supply, then the DDi Series of 12V-12V and 24V-24V Isolators will suffice. There are also 48V-12V units available for telecoms and forklift truck applications.
These 12V units are ideal for small vehicle applications such as cars, minibuses, small marine craft, caravans and motorhomes and a variety of industrial uses.
12V-12V and 24V-24V units provide a stable output voltage as well as providing galvanic isolation for a variety of application.
There are three 12V-24V products in the range running at currents from 3A (DD 12-24 072) to 10A (DD 12-24 240), while there are 5 more products from 3A – 10A in the 12V-12V and 24V-24V isolator range. All products use modern switchmode designs and are built using the same manufacturing concepts and technologies as the successful PowerVerter range which will of course meet your 24V-12V requirements.
|
|
These products offer a convenient way to operate mass produced 12Vdc equipment such as cell phones, in car entertainment, professional communication and telematics equipment, refrigerators, televisions etc. from the 24Vdc mobile electrical systems found on diesel engined vehicles and vessels.
There are 10 products in the range from 3A to 24A in isolated or common earth configurations. They have been optimised for high volume 24Vdc to 12Vdc applications such as on heavy goods vehicles, coaches, buses, construction, forestry and agricultural vehicles, commercial and leisure marine vessels.
|
|
|
|
|
|
|
NAVYLEC NAVYGUARD 12Vcc
Keeps the supply voltage of the electronic equipments on board during the starting phases or launching strong consumption and prevents their shut down or their reset.
Protect the electronics components and improves their lifetime
Prevent the shutdown and the reset of the equipment on board
Prevent the loss of memory or configuration
Automatically active during the engine starting, using an electric compressor or a windlass…
Operating condition indicators
Very low consumption
On an electrical supply network, a more or less important voltage drop can stop operation temporarily, make loose the memory, or freeze the use of electronics components connected on a common electric circuit.
Before the voltage of an electrical supply network goes to the minimum of the equipment’s voltage input, the safeguard NAVYGUARD® NAVYLEC® provides to the equipment terminals a minimal voltage which avoids its “shutdown”, its “freeze” or its “reset”.
The NAVYGUARD® NAVYLEC® is particularly intended to maintain supplied voltage of the equipments connected on an electric circuit 12V if a starter of thermal engine, a compressor or any other electric consumer implementing could use a strong electrical current. These equipments are able to make a voltage drop on the electrical circuit.
• The power supply NAVYGUARD® allows using a voltage of 10,5Vdc on the terminal of the equipment even if the battery voltage falls down to 7Vdc.
• Advised to protect the power supply of GPS, Sounders, Navigation screen, etc. It is also appropriate like protection for the electronic sensitive circuits 12V.
• Compact size (105x92x26mm)
|
|
Different electrical systems use different voltages. This Magic DC-DC converter, from a new generation of microprocessor-controlled converters, will turn 24V DC into 12V DC, so you can enjoy both. But it brings you even more benefits, like dimming and battery charging.
The voltage required for direct current (DC) can vary considerably onboard a yacht. A bow thruster or a winch installation often works at 24V. But navigation and communication equipment mostly requires 12V. By using this small and lightweight DC-DC converter another voltage than applied in your basic system can be reached. It also ensures that your onboard equipment has a stable power supply with the right voltage. If you have many power-consuming devices onboard, the parallel use of several units can allow capacities of 40, 60 or more Amps. The charging of batteries takes place via the Mastervolt three-stage charge function.
|
|
|
Xantrex manufactures wind converter systems for use with grid-connected wind energy turbine systems up to 1.5 megawatts in size. For information contact Kris Jernstedt, sales manager for Xantrex wind projects.
|
|
Affordable backup power solution
The entry-level CR Series provides AC power without interruption to keep your critical equipment running during a power outage. Built with an automatic transfer switch, the CR instantly switches to battery power during a blackout or brownout. When AC power is restored it automatically recharges the battery. Available in 1000, 1500 and 2400 watt models, it is ideal for powering common loads such as refrigerators, computers, lights, small televisions, radios and fans.
|
|
|
Offering superior quality true sine wave output, the Prosine 1000i and 1800i stand-alone inverters are ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications using European voltage and frequency standards, their 230-volt, 50 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads.
|
|
BEP Marine have introduced a new range of DC - DC Converters for use on 24v systems, to supply 12 Volts to HF/SSB Radios, high power audio, TV’s etc. The range offers the following features:
Features:
- High efficiency (>90%) switchmode voltage converter
- Short circuit protected: output drops to 0V
- Reverse polarity protected: reverts when corrected
- Fast shutdown protects equipment and wiring
- Does not rely on fuses to protect equipment
- Case floating (no DC connection)
- LED state indicators
- Crimp on cable connectors (supplied)
- Clip-on mounted bracket (supplied with screws)
- Easily installed – fit anywhere. (very small size)
- EMC compliant – As/NZS 2064
|
|
Possibly the widest range on the market! Both isolated and not isolated models are available.
An ever-increasing amount of electric equipment is being used on vehicles and boats. Because most low-voltage equipment, such as navigation and radio equipment, mobile telephones or car hi-fi systems, is designed for 12 Volts, Victron Energy supplies DC/DC converters which deliver a stable 12 Volt supply from a 24 Volt system.
Next to converters from 24 V to 12 V, a wide range of other models is available.
|
|
Pure sinewave output, high peak power and high efficiency.
Combined high frequency and line frequency technologies ensure the best of both worlds
Models range from 150VA to 3000VA per module.
Scalable: up to six Phoenix Inverters 3000 can be paralleled in single phase, split phase and three phase configuration.
|
|
| ... products without information |
| |
|
|
