|
|
This new AutoAnchor offers all the well known features of the original AutoAnchor chain counters and windlass control systems plus several new innovations, including bow and stern thruster control, deck light control plus anchor wash control.
The AA710 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Full windlass control and chain counting from anywhere on the boat with the hand held wireless remote.
Controls bow and stern thrusters independently and together.
Features a preset stopping point on retrieval.
Easy-to-operate remote has a graphic LCD screen with an intuitive user interface.
Rode count, signal strength, battery level and windlass speed and direction are shown on the backlit display.
|
|
Panel mount AutoAnchors. The AA560 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Windlass control and monitoring from the helm.
Large LCD display with adjustable backlighting shows length of anchor rode deployed. Display in feet or metres.
One-touch automatic function deploys and retrieves a preset length of anchor rode.
Vessel is protected during anchor retrieval by preset windlass stopping point and docking alarm.
Safety lock protects windlass from accidental deployment.
Measurements and settings are saved on exit or if the battery fails.
Straightforward installation and set up with pre-programmed calibrations for rope/chain rodes.
Inbuilt diagnostics for troubleshooting installation issues.
Install up to two units or combine with the AA150 or AA601 for multiple stations.
Console available in black or grey.
Cover for weather protection.
|
|
All the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.
- High level wireless transmission security - 2.4GHz ISM band
- Hand held controller displays rode count plus signal strength and battery level
- Ergonomic shape with wrist strap connector
- Water resistant to IP65
- Rubber cover moulding for grip and non slip protection
- Console holder and protective cover
- Shockproof
- IEEE 802.15.4 compliant
|
|
The Control Box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and/or pierce the container, as all the terminals and the panel for the electrical connections are perfectly accessible from the outside.
Outer construction in self-extinguishing polyester resin, resistant to shock and marine corrosion. Degree of protection IP 56 - protection against deckwater.
|
|
This new remote control model LIBERTY has an elegant and functional design. The soft rubber case, which covers sideways the remote control, allows a safe and handy taking under any condition.
LIBERTY is completely waterproof and supplied with waterproof plug and socket (IP68) of the finest quality.
The extending flexible cable (approximately 4 metres) gives the maximum freedom on board during anchoring manoeuvring.
|
|
Wireless remote control:
With a radio control installed you will have full control of windlass operation where ever you are on board. The control consists of a transmitter and a receiver. With the AutomaticDownTM function the windlass will run automatically for 25 seconds before stopping. To enable the AutomaticDownTM just press the DOWN button on the receiver. To stop the AutomaticDownTM at any time, press DOWN once on the receiver.
|
|
|
To operate your windlass safely in all weather conditions you need top quality switch gear that can stand the roughness of the sea. Anchorlift uses only the best of materials to ensure you a sae and long service life of your equipment.
|
|
| ... products without information |
| |
This new AutoAnchor offers all the well known features of the original AutoAnchor chain counters and windlass control systems plus several new innovations, including bow and stern thruster control, deck light control plus anchor wash control.
The AA710 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Full windlass control and chain counting from anywhere on the boat with the hand held wireless remote.
Controls bow and stern thrusters independently and together.
Features a preset stopping point on retrieval.
Easy-to-operate remote has a graphic LCD screen with an intuitive user interface.
Rode count, signal strength, battery level and windlass speed and direction are shown on the backlit display.
|
|
Panel mount AutoAnchors. The AA560 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Windlass control and monitoring from the helm.
Large LCD display with adjustable backlighting shows length of anchor rode deployed. Display in feet or metres.
One-touch automatic function deploys and retrieves a preset length of anchor rode.
Vessel is protected during anchor retrieval by preset windlass stopping point and docking alarm.
Safety lock protects windlass from accidental deployment.
Measurements and settings are saved on exit or if the battery fails.
Straightforward installation and set up with pre-programmed calibrations for rope/chain rodes.
Inbuilt diagnostics for troubleshooting installation issues.
Install up to two units or combine with the AA150 or AA601 for multiple stations.
Console available in black or grey.
Cover for weather protection.
|
|
All the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.
- High level wireless transmission security - 2.4GHz ISM band
- Hand held controller displays rode count plus signal strength and battery level
- Ergonomic shape with wrist strap connector
- Water resistant to IP65
- Rubber cover moulding for grip and non slip protection
- Console holder and protective cover
- Shockproof
- IEEE 802.15.4 compliant
|
|
The Control Box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and/or pierce the container, as all the terminals and the panel for the electrical connections are perfectly accessible from the outside.
Outer construction in self-extinguishing polyester resin, resistant to shock and marine corrosion. Degree of protection IP 56 - protection against deckwater.
|
|
This new remote control model LIBERTY has an elegant and functional design. The soft rubber case, which covers sideways the remote control, allows a safe and handy taking under any condition.
LIBERTY is completely waterproof and supplied with waterproof plug and socket (IP68) of the finest quality.
The extending flexible cable (approximately 4 metres) gives the maximum freedom on board during anchoring manoeuvring.
|
|
Wireless remote control:
With a radio control installed you will have full control of windlass operation where ever you are on board. The control consists of a transmitter and a receiver. With the AutomaticDownTM function the windlass will run automatically for 25 seconds before stopping. To enable the AutomaticDownTM just press the DOWN button on the receiver. To stop the AutomaticDownTM at any time, press DOWN once on the receiver.
|
|
|
To operate your windlass safely in all weather conditions you need top quality switch gear that can stand the roughness of the sea. Anchorlift uses only the best of materials to ensure you a sae and long service life of your equipment.
|
|
| ... products without information |
| |
Side-Power Round Touchpanel Thruster Control, Chrome Bezel, 12/24V, 5-wire, 2" cutout.
Side-Power has introduced, for 2005, two new round control panels. These single control panels are designed to better complement today's helms and utilize an attractive chrome bezel ring that covers the four mounting screws. They are easy to install with a 2" hole saw and seal with a large o-ring.
|
|
| ... products without information |
| |
|
|
|
|
|
The unique Smart Switch Deluxe Programmable Toilet Control was designed for all electric marine toilets with remote, fresh or salt water flushing supply via an inlet pump or water solenoid valve. The stylish control panel provides fully automatic programmed flushing when the auto touch pad is pushed or provides
independent operation of the inlet or discharge pumps for maintenance or line clearance when the manual touch pads are used.
In-built troubleshooting features and toilet pump protection are standard. Other features include automatically sensing your vessels supply voltage and self-adjusting to suit 12, 24 or 32-volt systems, protection from radio interference and ZERO current draw.
With the built in intelligence this device will sense for toilet blockage, overheating, pump and valve short circuit, & pump open circuit, automatically cut off and display an error code protecting your complete system.
This Model is truly versatile with two different timing sequences built in. This feature is user program selectable ( Change modes in a flash).
Easy Installation and easy operation, the switch control panel comes in either Black, White, Brushed Stainless Steel or Polished Brass making this an attractive product to suit most needs.
As with all Smart Switch products, the Deluxe Toilet Controller employs State of the Art Microcomputer Technology. This, and the fact it is completely encapsulated in silicon, protecting the electronic components from the harsh marine environment, guarantee long-term life & reliability.
|
|
The unique Smart Switch Programmable Toilet Controller was designed for all electric marine toilets with a single motor/pump flushing system. The stylish control panel provides fully automatic programmed flushing when either button is pushed.
This unit features a Full and Half Flush cycle providing for a water / holding tank save mode.
Features includes automatic voltage sensing as well as 'Over Voltage' 'Over Temperature' 'Short Circuit' 'Over Current Protection' and 'Open Circuit Detection'.
Easy Installation and easy operation the switch control panel comes in either Black, White, Brushed Stainless Steel or Polished Brass making this an attractive product to suit most needs.
This product employs State of the Art Microcomputer Technology and is completely encapsulated in silicon protecting the electronic components from the harsh marine environment insuring long-term life & reliability
|
|
|
|