|
|
|
Rich experience of successful spreader operation fabricated by the company Baltkran allowed developing the wide range of models in a short time that can be used either with our own container cranes or with any other cranes. All load suspension devices can be operated in Temperature condition from -40 up to +40 C.
|
|
|
|
|
|
|
The Bromma SSX45 ship to shore spreader:
The telescopic spreader is of a rectangular frame construction enabling easy location on containers. The spreader is as standard equipped with 4 x 10 tonnes lifting lugs in the corners of the end beams for heavy lifts and for handling damaged containers. The spreader can adjust its length to lift 20 foot, 40 foot and 45 foot containers using ISO floating twistlocks. The spreader can retract to the 19 foot-6 inch position in case it becomes jammed in the ship's 20 foot cell. The design with recessed end beams makes handling of lashing frames and hatch covers possible. All motions of the spreader are controlled from the driver's cab and there are provisions made for signals in the cab indicating the position of the twistlocks and landing pin status. Made of high quality steel, the standard SSX45 spreader provides high lifting capacity with a low nominal tare weight thanks to the box design of the telescoping beams and the main frame. The spreader is designed in accordance with DIN 15018 H2B4. All components can be easily assembled, adjusted, removed and are accessible for inspection and maintenance. The spreader comes with the SCS² Spreader Communications System, reducing and preventing downtime through improvements in the area of electrical connections. It will also shorten downtime through faster spreader fault diagnostics.
Major features:
- Adjustable for 20', 40' and 45' containers
- Recessed end beams allow handling of lashing frames and hatch covers
- Advanced communications system reduces downtime considerably
- Fast trouble shooting
- Fulfils design criteria among DIN 15018 H2B4, FEM 1.001 and British Standard BS 2573
|
|
|
|
|
|
|
The Bromma SSX40 ship to shore spreader:
The telescopic spreader is of a rectangular frame construction enabling easy location on containers. The spreader is as standard equipped with 4 x 10 tonnes lifting lugs in the corners of the end beams for heavy lifts and for handling damaged containers. The spreader can adjust its length to lift 20 foot and 40 foot containers using ISO floating twistlocks. The spreader can retract to the 19 foot-6 inch position in case it becomes jammed in the ship's 20 foot cell. The design with recessed end beams makes handling of lashing frames and hatch covers possible. All motions of the spreader are controlled from the driver's cab and there are provisions made for signals in the cab indicating the position of the twistlocks and landing pin status. Made of high quality steel, the standard SSX40 spreader provides high lifting capacity with a low nominal tare weight thanks to the box design of the telescoping beams and the main frame. The spreader is designed in accordance with DIN 15018 H2B4. All components can be easily assembled, adjusted, removed and are accessible for inspection and maintenance. The spreader comes with the SCS² Spreader Communications System, reducing and preventing downtime through improvements in the area of electrical connections. It will also shorten downtime through faster spreader fault diagnostics.
Major features:
- Adjustable for 20 and 40 foot containers
- Recessed end beams allow handling of lashing frames and hatch covers
- Advanced communications system reduces downtime considerably
- Fast trouble shooting
- Fulfils design criteria among DIN 15018 H2B4, FEM 1.001 and British Standard BS 2573
|
|
|
|
|
|
|
The Bromma YSX40 Marathon:
The Bromma YSX40 Marathon is a heavy-duty yard crane spreader calculated for 2 million cycles.
The spreader can adjust its’ length to lift 20 foot and 40 foot containers using ISO floating twistlocks.
The telescopic spreader is of a rectangular frame construction enabling easy location on containers. The design with recessed end beams makes handling of lashing frames and hatch covers possible. As a standard, the spreader is equipped with 4 x 10 tonnes lifting lugs in the corners of the end beams for heavy lifts and for handling damaged containers.
All motions of the spreader are controlled from the driver’s cab and there are provisions made for signals in the cab indicating the position of the twistlocks and landing pin status. Control valves for twistlock and guide arms are mounted on the end beams, in order to simplify maintenance and to minimize the number of hydraulic hoses in the cable chain system. Several guide arm combinations are available.
The electrical components and the cable chain system are well protected inside the main frame. The hydraulic power pack is entirely enclosed within the main frame to ensure maximum protection. The complete hydraulic unit is shock mounted in one sturdy frame with protective covers.
Made of high quality steel, the standard YSX40 Marathon spreader provides high lifting capacity with a low nominal tare weight thanks to the box design of the telescoping arms and the main frame. The spreader is designed in accordance with DIN 15018 H2B4. All components can be easily assembled, adjusted, removed and are accessible for inspection and maintenance.
|
|
|
|
|
|
|
Spreader Model 3200 is a non telescopic top spreader for the handling of loaded 20ft ISO containers. It is designed to be mounted on cranes. The basic concept of this type ofspreader has been used by ELME sincemany years and offers distinct advantages such as:
- beam sections dimensioned to absorb not only the vertical, but also the very considerable horizontal forces
- pendular type of twistlocks, allowing 10 mm movement in 360º. They are produced from 42CrM04 forged and hardened steel and are extremely easy to service.
The main frame and end beams are each made of rugged, rectangular box sections. The end beams which incorporate the twistlock systems are welded to the central frame. They are positioned to support and absorb horizontal and vertical shockloads. The mounting of the spreader is customised to fit the head block of the crane. Spreaders are able to operate safely with list, skew and trim.
CONTROL AND SAFETY SYSTEM
Electrical systems monitor the state of the spreader at all times.Indicator lights advise the operator when the spreader is correctly "seated", "locked" or "not locked" and each signal is a precondition for the important safety functions of the spreader such as twistlock activation, extension and retraction and lift interrupt. When an error occurs in the locking or unlocking procedure, indication lights are flashing. No signals will be sent to the crane and therefore the hoist system can be safely blocked.
|
|
|
|
|
|
|
Spreader Model 3400 is a non telescopic top spreader for the handling of loaded 40ft ISO containers. It is designed tobe mounted on cranes. The basic concept of this type of spreader has been used by ELME since many years and offers distinct advantages such as:
- beam sections dimensioned to absorb not only the vertical, but also the very considerable horizontal forces
- pendular type of twistlocks, allowing 10 mm movement in 360º. They are produced from 42CrM04 forged and hardened steel and are extremely easy to service.
The main frame and end beams are each made of rugged, rectangular box sections. The end beams which incorporate the twistlock systems are welded to the central frame. They are positioned to support and absorb horizontal and vertical shock loads. The mounting of the spreader is customised to fit the head block of the crane. Spreaders are able to operate safely with list, skew and trim.
CONTROL AND SAFETY SYSTEM
Electrical systems monitor the state of the spreader at all times.Indicator lights advise the operator when the spreader is correctly "seated", "locked" or "not locked" and each signal is a precondition for the important safety functions of the spreader such as twistlock activation, extension and retraction and lift interrupt.
|
|
|
|
|
|
|
Container spreader Timars BTC
Timars BTC is a solid rectangular shaped frame container spreader for handling ISO certified containers. The spreaders design manages extremely rough conditions.
Timars BTC is available in semi-automatic and also two handles for manual operation. Its operates on the "gravity and lift" principle which means that the locking and unlocking of twistlocks is made by
lowering and lifting of the spreader. The spreader is available in different sizes, 20ft, 30ft, 40ft. The lifting capacities are from S.W.L 35 tonnes to 40 tonnes.
The spreader is also equipped with robust guide arms. To handle overheight flats, the spreader is also equipped with lower lifting eyes with same capacity as the spreader.
The main sling consist of 2pcs 2-part wire sling for attaching to crane hook. Chain sling is optional.
The pure mechanical locking system is very easy to overlook and the downtime for maintenance and service is very low.
All spreaders are of course CE-labelled and quality tested and test loaded.
Timars BTC spreader can also be equipped with Timars Gravity Centrelizer for safe handling of unevenly loaded containers.
|
|
|
|
|
|
|
Container spreader Timars C-lift
The Timars C-Lift is a semiautomatic fixed frame container spreader for the top lifting of containers by any kind of crane, such as quay crane, mobile crane and even on board a ship.
The C-Lift is sold in 20ft, 30ft and 40ft models with safety weight load S.W.L. from 32 tonnes up to 40 tonnes. The C-Lift operates on the "gravity and lift" principle which means that the locking and unlocking of twistlocks is made by lowering and lifting of the spreader.
The spreader offers unique, new and interesting advantages useful to the customer, such as:
%u2022 Safety interlocking system (se more information below),
%u2022 Safety Torque Limitation (STB-system
%u2022 Fendering guidearm system for safe and fast approach to the container,
%u2022 Extremely low tare weight (e.g. 950 kg for a 20ft),
%u2022 Visual indicator for twistlock position
%u2022 Attachments for overheighthandling of open
container and flatracks,
%u2022 Flexible construction for unstraight conditions
Timars C-lift spreader can withstand tough climates and is of course CE-labelled. All spreaders are quality tested and test loaded.
|
|
|
|
|
|
|
The ELME Model 8100 TM is a heavy duty 40 ton capacity telescopic harbour or jib crane spreader, designed to handle loaded ISO containers. It is renowned in the industry for its strength, fast telescopic extension speed and the excellent visibility it allows onto containers. The 8100 TM is fitted with ISO quick exchange floating twistlocks. It also features 6 hydraulically operated side flippers. Twistlocks and sleeves are made out of forged steel. A mechanical safety device prevents accidental unlocking.
The extension beams slide on self lubricating wear strips. Tough rubber pads mounted between the beams and frame dampen shocks and help reduce noise. Each beam has an individual hydraulic extension cylinder. The three-points cylinder mounting absorbs shock loads from all directions. Two electric motor and pump assemblies ensure simultaneous extension of both beams.
Centre of gravity adjustment is +/- 800 mm. It can also be operated with the spreader under load. Maximum eccentricity positions are secured by the end-strokes of the centre of gravity adjustment cylinder.
The control voltage from the crane is always converted to 24V DC for safety and reliability. Return signals are transformed back to the crane's voltage. In case of sensor failures, return signals flash to inform the crane driver of the corresponding problem. The ELME 8100 TM features standard safety systems such as a blocked beam extension function as soon as the spreader is seated and/or locked. Besides the mechanical locking system, an electrical safety prevents twistlock operation if all 4 corners are not properly seated.
|
|
|
|
|
|
|
Spreader Model 8200 is 45 tonnes capacity telescopic quayside crane spreader designed to handle loaded ISO containers. It is renowned in the industry for its rugged design, fast telescopic extension speed and the excellent visibility it allows onto containers, thanks to its proven rectangular box section design. The 8200 is fitted with ISO quick exchange floating twistlocks. It also features four hydraulically operated corner flippers. Twistlocks and sleeves are made out of forged steel. A mechanical safety device prevents accidental unlocking. It extends from 20 to 40 ft.
The extension beams slide on self lubricating wear strips. Tough rubber pads mounted between the beams and frame dampen shocks and help reduce noise. Each beam has an individual hydraulic extension cylinder. The three-point cylinder mounting absorbs shock loads from all directions. Rugged mechanical stops ensure that each telescopic position is maintained during the container handling operation. Two electric motor-and pump assemblies ensure simultaneous extension of both beams.
Control voltage from the crane is always converted to 24VDC for safety and reliability. The ELME 8200 features standard safety systems such as blocked beam extension function as soon as the spreader is seated and/or locked. Besides the mechanical locking system, an eletrical safety prevents twistlock operation if all four corners are not properly seated. When an error occurs in the locking or unlocking procedure indication lights are flashing. No signals will be sent to the crane and therefore the hoist system can be safely blocked.
|
|
|
|
|
|
|
Spreader Model 8100 is a 40 tonnes capacity telescopic rail mounted or rubber tyred gantry crane spreader designed to handle loaded ISO containers. It is renowned in the industry for its light weight, fast telescopic extension speed and the excellent visibility it allows onto containers. The 8100 is fitted with ISO quick exchange floating twistlocks. It also features four hydraulically operated corner flippers. Twistlocks and sleeves are made out of forged steel. A mechanical safety device prevents accidental unlocking. The main structure is manufactured to DIN15018 classification H2B4, corresponding to two million load cycles. It extends from 20 to 40 ft. The extension beams slide on self lubricating wear strips. Tough rubber pads mounted between the beams and frame dampen shocks and help reduce noise. Each beam has an individual hydraulic extension cylinder. The three-point cylinder mounting absorbs shock loads from all directions. Rugged mechanical stops ensure that each telescopic position is maintained during the container handling operation. Two electric motor-and pump assemblies ensure simultaneous extension of both beams. In case of failure the spreader can be operated with a single motor/pump at a lower speed.
Control voltage from the crane is always converted to 24VDC for safety and reliability. The ELME 8100 features standard safety systems such as blocked beam extension function as soon as the spreader is seated and/or locked. Besides the mechanical locking system, an electrical safety prevents twistlock operation if all four corners are not properly seated.
|
|
|
|
|
|
|
OHA-Fully automatic overheight frame
The Timars OHA-frame is a fully automatic overheight spreader which has been developed in order to assist operators with the most safe and efficient handling of oversized goods; like flats, bolsters and open top containers.
The OHA-frame is attached under any parent spreader with ISO standard base measure, by the twistlocks of the parent spreader only, and acts as "extended legs" to the parent spreader. This means a much safer and faster than handling goods with chains. No adjustments or additional equipment is needed on the parent spreader for attaching or deattaching the Timars OHA-frame. No external power supply or hydraulics is needed neither for attaching nor in operation. The locking of the twistlocks of the Timars OHA-frame is pure mechanical design and works on gravity and lift principle, which means that locking and unlocking of the twistlocks is made by lifting the overheight spreader. This leads to less down-time, operational advantages such as Timars OHA is not depending of pressure on the parent twistlocks or malfunction in a hydraulic system due to temperate differences. This of course also has brought down the maintenance time and costs to a minimum.
|
|
| ... products without information |
| |
| ... products without information |
| |
|
|
60.96 m
200' 0"
|
|
|
Barge Derrick
The U.S. Army Barge Derrick is the first of its kind in the U.S. Army. It has a primary mission of loading and discharging heavy lift cargo beyond the capability of a ship's gear. Its unique characteristics give the Army Transportation Corps an unprecedented capability to move heavy cargo. The Barge Derrick also has secondary missions of conducting salvage operations, clearing port channels and berths, and removing obstacles.
The Barge Derrick measures 200 feet in length with an 80 foot overall beam and a depth of 14 feet 4 inches. The Barge Derrick is equipped with a marine crane capable of lifting 115 long tons (LT) at 175 feet. The crane is equipped with three hoists-main (115 LT), auxiliary (25 LT), and whip (5 LT)-with hydraulic power supplied by a 1,200 HP diesel engine.
|
|
Hyundai's Automated Container Terminal System has been developed for efficient, trouble-free operation, 24 hours a day, 365 days a year.
- Automated Transfer Crane (ATC)
- Automated Guided Vehicle (AGV)
Advantage of Hyundai's Automated Container Terminal System
Turn-key delivery
Reduced operating costs
High productivity & reliability
Lower maintenance costs
Safe & secure container handling
|
|
Hyundai supplies a whole range of bulk handling system from conceptual design to start-up and commissioning, including detail design, procurement, fabrication, thus allowing us to optimize total system design.
- Loading and Unloading Equipment
- Conveyors and Auxiliary Equipment
- Stockpiling, Blending and Reclaiming
- Screening and Crushing Equipment
- Control and Instrumentation
|
|
| ... products without information |
| |
Hyundai supplies a whole range of bulk handling system from conceptual design to start-up and commissioning, including detail design, procurement, fabrication, thus allowing us to optimize total system design.
- Loading and Unloading Equipment
- Conveyors and Auxiliary Equipment
- Stockpiling, Blending and Reclaiming
- Screening and Crushing Equipment
- Control and Instrumentation
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
