|
|
|
|
3.50 m
11' 6"
|
|
|
We fondly refer to the sailing model of the Westcoast 11'6" row boat as "The Adult Dinghy" because there's room for one large adult in the aft area between the seats and two more with a picnic basket forward of the mid-seat either side of the centerboard well. Why should kids have all the fun?
The Westcoast row boat is rigged with a standing lug sail with a 56 square foot sail. It features a teak kick-up rudder and pivoting bronze centerboard. A removable bowsprit and jib is also available.
This row boat handles and performs superbly under sail in both light and high winds. The hull shape forward produces a lift effect when gunnel down, hard on the wind. This makes it harder to drive the gunnel under and keeps the interior dry. Off the wind the Westcoast just scoots along and is a joy to be aboard.
The sailing model is also available with an optional slide seat unit which adds the ability to use the boat for getting a full body workout doing slide seat sculling.
|
|
|
|
4.06 m
13' 4"
|
|
|
This sprightly little sailing dinghy is a throwback to the days when a sailboat wasn't a sailboat unless it had at least two sails, no matter its size. Yet, here is the sloop rigged Tribute with modern lines, produced of contemporary materials and methods.
Its modest dimensions (13'2" length) belie its capacity for sailboat fun. This is a sailboat that was designed to be easily sailed by one person but will carry up to 3. The Tribute has a generously sized cockpit with molded in fore and aft seating. All corners and edges are rounded for maximum comfort.
The Tribute comes standard with these features:
Harken blocks and fittings
Roller furling jib
Loose footed main sail
Molded in mast well
Cockpit drain with plug
Swing-up rudder with tiller extension (hiking stick)
Rotationally molded dagger board
Molded in transom handles and bow cross hole
This boat has no CE marking
|
|
|
|
4.32 m
14' 2"
|
|
|
The sailing model of Tyee Spirit 14 rowboat offers a little more room than a classic Whitehall Spirit 14. It sails very comfortably
with two or three or even four adults aboard. It features an attractive standing lug rig with varnished sitka spruce spars and booms, teak blocks, and sails by UK sailmakers. A solid teak kick up rudder and and drop daggerboard are standard. A cast bronze kickup centerboard is available.. It is also a high performance single or double position traditional rowboat that carries from one to four people..
It is available with an option of an easily installed or removed sliding seat sculling unit and bronze hinged outriggers which convert it to a sliding seat sculling boat.
These boats are built to impeccable standards with lapstrake style fiberglass hull with solid teak woodwork and bronze fittings. They will handle serious usage in rough ocean conditions and are built to last generations.
|
|
| ... products without information |
| |
|
|
3.70 m
12' 2"
|
|
|
|
|
|
4.59 m
15' 1"
|
|
|
|
|
|
4.88 m
16' 0"
|
|
|
|
|
|
6.09 m
20' 0"
|
|
|
|
|
|
7.88 m
25' 10"
|
|
|
|
For dinghies and small cruisers
LEASURE/CLUBS MASTS
untappered tubes, outer yard ropes.
Delivered with tenon heel plug.
|
|
For dinghies and small cruisers
REGATA MASTS
Tappered tube, if authorized by the class rules. Inner yard ropes
|
|
|
Suit external mounting on solid or tubular sections. Push-on beak design allows attachment to the pole ring without manually opening the pin. Attachment point for pin release lines.
|
|
C-Tech manufactures masts for sports boats in:
- Round section, suitable for boats like Thompson 590
- Oval section, suitable for larger size masts
Construction techniques
- available in standard, intermediate or high modulus carbon fiber
- reinforcing for fittings can be built into laminate
- shrink-wrapped and heat cured
- black carbon finish or painted
- can be built to any size specifications
|
|
|
The FreedomLift® is manufactured with the finest quality parts - strong, lightweight marine-grade alloy and stainless steel hardware, a premium Hydraulic Power Unit system with environmentally safe fluid, and wireless remote (waterproof) control operation. The two hydraulic lift assemblies are interconnected by a structural cross member assembly, ensuring the integrity of the lift and providing smooth, uniform movement of both Arms despite any uneven weight distribution of your tender. And, the system is installed by the marina or yard of your choice!
|
|
- Realized in massive stainless steel 316 L polished
"Girofix" is easy to install(settle) on all the boats, it presents the advantage to obtain the wished direction(management) whatever is the slope of the back picture(board) to adapt: Bossoirs MPI, arceau MPI, carries(wears) bottles dive MPI, stand for fishing rod MPI, etc....
|
|
Models 100, 125, 150, 175, 200, 225, 250
Traditional Davits have been designed to lift or lower weights up to 250kg (550lbs) per pair. They are manually operated, and incorporate an adjustable sliding arm extension for final positioning of the raised dinghy or tender.
Standard base allows for the easy access of the securing bolts and can be used in conjunction with transom brackets or deck shoes, which makes for the easy removal of the davits for stowage.
|
|
Nautical Structures’ Mini-Crane Davit System feature the most recent advances in small davit technology in a davit system produced for over ten years. Proven to be the best selling and most reliable davit available today.
The Mini-Crane‘s sleek low-profile styling and strong lines disguises its flexible utility. The Mini-Crane Davit System is capable of lifting 800 pounds, sufficient for small hard-bottomed inflatable boats and most personal watercraft. A 600 pound capacity model is also available.
|
|
| ... products without information |
| |
Mini-B compass
Specially designed for small boats (less than 9 metres / 30 ft).
The Mini-B combines exclusive attractive features:
• Good looks of a binnacle mounted compas.
• No drilling in the deck is required: the binnacle is simply secured with 3 screws.
• The compass cell can be removed instantly with one single twist, for quick storage and security.
Mini-B comes in 3 versions:
• Mini-B Olympic: for sailboats, with 3 lubber lines.
• Mini-B Offshore: for powerboats.
• Mini-B Tactical: for racing, with tactical card
|
|
Classification:
Designed for use on smaller boats and/or tenders that do not go far from shore or the mother ship, stay exclusively in inshore waters, and return to homeport/mothership at night and/or for travel up to 1hr (60min) from medical care.
Description
A comprehensive, highly organised, user-friendly, and safe medical kit, that complies to, and exceeds MCA Category C regulations MSN 1768 (M+F).
|
|
|
|
see the results for the following category : 
