|
|
Engine room, hold, laundry, store
Chemical processing and industrial areas
|
|
The luminaire is purposed for evacuational illumination of accommodation on vessels. Ceiling mounting, recessed.
IP20, IP22, 1x8W, 1h, 3h
|
|
|
The luminaire is purposed for illumination of accommodation, corridors etc. on vessels. Steel body, powder coating; polycarbonate diffuser. Wall or ceiling mounting. IP30, 2x18W
|
|
- Batten luminaire
- Continuous mounting
Specifications:
- Batten luminaire with main body of epoxy polyester powder coated electrogalvanised steel.
- End caps of plastic.
|
|
Application : passage ways, cabins, lounges, dining rooms, accommodation areas
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : phosphate coated steel, powder coated white
Diffuser : polycarbonate opal
Mounting : 4 mounting holes, Ø 5.5 mm cut out 250 x 250 mm
|
|
Variety of diffusers available for every application.
Terminal block at each end for incoming wiring.
Feed through wiring up to 23A, eliminating the need for field junction boxes.
Multiple knockouts for cable entries.
Adjustable mounting brackets for easy installation in marine ceiling systems.
Ceiling matching profiles included.
Corrosion resistant aluzinc housing.
Epoxy powder coated finish.
Spring loaded lampholders that are resistant to shock and vibration.
|
|
Clear prismatic acrylic diffuser.
Terminal block at each end for incoming wiring.
Feed through wiring up to 23A, eliminating the need for field junction boxes.
Multiple knockouts for cable entries.
Adjustable mounting brackets for easy installation in marine ceiling systems.
Corrosion resistant aluzinc housing.
Epoxy powder coated finish.
Spring loaded lampholders that are resistant to shock and vibration.
|
|
|
The fitting is purposed for illumination of accommodation where there is low temperature, e.g. cold stores. The body is made of phosphate coated steel and painted with white powder coating. Wall or ceiling surface mounting. IP66, 2x18W, -30°C
|
|
Applications : coldrooms, refrigerated areas, freezing rooms
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : zinc coated steel, powder coated white
Diffuser/Shade : polycarbonate, clear
Mounting : 2 mounting holes, Ø 9 mm
|
|
|
The lighting fitting is purposed for illumination of technical accommodation, holds, decks etc. on vessels. Mild or stainless steel body, powder coating; polycarbonate diffuser. Wall or ceiling mounting surface. IP66, 1x60W
|
|
- High quality explosion proof luminaire, zone 2
- Easy maintenance
Specifications:
- High-quality Ex n longlife luminaire.
- The luminaire has a hinged geartray with quick connector for easy maintenance.
- The luminaire housing is made of Galfan (Z) or acid resistant stainless steel (S), with white stove-enamelled epoxy/polyester powder finish.
- Housing of Galfan is not suitable for marine outdoor installation.
- The cover is made of impact-proof polycarbonate.
- The emergency model is supplied with an external battery box. Emergency light versions (18W and 36W) are available with 1.5 or 3 hours battery duration.
|
|
Applications : hazardous areas zone 1 and 2
Approvals : according to the rules of relevant classification societies, additional VDE and IEC, examination certificate KDB 04 ATEX 339x
Housing : zinc coated steel, seamless deep drawn, powder coated white
Diffuser/Shade : polycarbonate, clear
Mounting : 2 welded brackets, 4 mounting holes, Ø 8 mm
|
|
Class 1, Division 2, Groups A,B,C,D, T3B.
Class 1, Zone 2, Groups IIA & IIB, T3B.
Clear polycarbonate diffuser, which is virtually indestructible.
Terminal block at each end for incoming wiring.
Feed through wiring up to 23A, eliminating the need for field junction boxes.
Four cable entries, two in each end.
Corrosion resistant aluzinc or stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
Stainless steel hardware.
|
|
|
Fluorescent light fitting 2x36W. Housing and structured diffuser made out of polycarbonate, reflector white painted steel. Clips made out of stainless steel. Single ended through wiring, 1 x cable gland PG13,5. Optional 3 cable glands PG13,5 or M20 can be installed (perforate drill-holes). Fitting with ballast unit 230V, 50Hz, compensated (other voltage and frequency upon request). Lampholder for standard 2-pin fluorescent lamps. Mounting through 2 stailess steel bolts M8. Housing in colour RAL 7035. Fitting can also be used with exit signs (adhesive).
|
|
|
Ex-protected fluorescent light fitting with 2 channel electronic ballast unit for bi-pin fluorescent lamps (G13) 2x18W. Housing made of glass mat reinforced polyester, protective cover made of polycarbonate. Double-sided lock with 10 latch points. Protective cover hingeable on both sides. Automatic switch built as a safety disconnector acc. to EN 60947.Automatic switch ensuring the disconnection of all exposed components when the fitting is opened . Large terminal compartment with 6 terminals up to 6 mm². Rated voltage: AC 110V-254V +/- 10%, 47-63Hz, DC 110V-230V /- 10%. Rated current: 0,18A; Cos phi: 0,95 (230V). 2x plastic cable gland M25. Permissable ambient temperature -25°C to 50°C. Insulation class I, single ended through-wiring.
|
|
|
Explosion-proof light up to 200W, with security switching arrangement. PTB-No. PTB 03 ATEX 1111,Ex-protection class: EEx de IIC T3+T4 Pressure resistant enclosure Red cast brass casing and glass ring Brass wire-guard With lampholder E 27 or B 22 Temperature class: hanging installation T4 - bulb up to 150W - metal alloy bulb up to 160W* - mercury vapour 80W* T3 - bulb up to 200W - mercury vapour 125W* - fluorescent bulb E 27 25W* T5 - DULUX EL 23 *Ignition and ballast unit required
|
|
|
EEx e high quality longlife luminaire. The luminaire has a hinged geartray for easy maintenance. The luminaire housing is made of Galfan (Z) or acid resistant stainless steel (S), with white stove-enamelled epoxy/polyester powder finish. Housing of Galfan (Z) is not suitable for marine outdoor installation. The diffuser is made of impact-proof polycarbonate. The emergency model is supplied with an external battery box. Emergency light versions (18W and 36W) are available with 1.5 or 3-hours battery duration (T4). All emergency fixtures (E1/E3) are prepared for remote control of emergency functions.
|
|
High-quality Ex n longlife luminaire.
The luminaire has a hinged geartray with quick connector for easy maintenance.
The luminaire housing is made of Galfan (Z) or acid resistant stainless steel (S), with white stove-enamelled epoxy/polyester powder finish.
Housing of Galfan is not suitable for marine outdoor installation.
The cover is made of impact-proof polycarbonate.
The emergency model is supplied with an external battery box. Emergency light versions (18W and 36W) are available with 1.5 or 3 hours battery duration.
|
|
Ceiling luminaire, recessed and surface
The solution for extremely narrow ceiling areas and for little rooms.
Application: Accommodation areas, lounges
Design: According to rules of maritime classification societies, additional VDE and IEC / EN
Protection degree: IP 30
Housing: Zinc coated steel sheet
Diffuser: Opal polycarbonate
Electric: Flexible wiring, heat resistant up to 105° C
Cable entry: 4 inlets for max. cable dia. 11 mm
Lamp base: G 23
Light sources (not included): TC tubular compact fluorescent lamp 9 W
Mounting: 4 mounting holes, dia. 5 mm
|
|
Coldroom luminaire, surface
The easily and rapidly cleanable luminaire for low temperature application.
Application: Refrigerated areas, coldrooms, freezing rooms; ambient temperature min. -40° C, max. +10° C; optimum light output at -10° C to -20° C
Design: According to the regulations USPH (U. S. Public Health) and according to rules of maritime classification societies, additional VDE and IEC / EN
Protection degree: IP 67
Ground plate: Stainless steel
Gear tray: Zinc coated steel sheet
Diffuser: Clear polycarbonate
Electric: Flexible wiring, heat resistant up to 105° C; removable gear tray with plug-in connector to the housing
|
|
Design- According to rules of maritime classification societies, additional IEC/EN
Approval authority- Physikalisch-Technische Bundesanstalt Braunschweig, cert. no. PTB 02 ATEX 2113
Protection degree- IP 67
Housing- Zinc coated steel or stainless steel
Gear tray- Zinc coated steel sheet
Diffuser- Polycarbonate clear
Electric- Electronic ballast; flexible wiring, heat resistant up to 105° C; through wiring up to 16 A possible; type with battery back up system; Integrated NiCd battery, incorporated overloading protection, LED for indication of battery power
Emergency operation- 1 x 18 W 180 minutes at 45 % luminous intensity, 1 x 36 W 180 minutes at 25 % luminous intensity
Charge time after full discharge- 18 W 24 h, 36 W 36 h
Cable entry- With Ex-certificate; M 25 x 1.5; for cable dia. 10 to 17 mm (others on request)
Lamp base- G 13
Light sources- (not included) 2-pin T 26 flourescent lamp 18 W, 36 W
Mounting- 2 welded brackets with 2 mounting holes each, dia. 10.5 mm
|
|
| ... products without information |
| |
Recessed LED fixture, emitting direct and diffused light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k or Natural White 3700°k
Cri: 93%
160 Lumen (natural)
Lighting Beam: 90°
ELECTRICAL DETAILS:
PowerLED 12W@20-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
TOM S LED
Downlights - Surface-mount fixture
With switch
27 LED High luminosity
For System to 12 V and 24 V
Operating voltage: 10-15 Vdc and 20-30 Vdc
Power consumption: 2,2 W and 2,1 W
Light color:
Daylight
Warm white
Cool white
Red
Material: AISI 316 Stainless steel
Height: 22 mm
Width: 90 mm
IP40
|
|
Recessed halogen light with frosted lens.
Colours Available:
White, Plated Gold, Chrome , Matt Silver or Silver Sand
|
|
Ceiling-mounted luminaire COMPAKLIGHT 18 led diam 65 completion White 12V
Ceiling-mounted luminaire 18 led
Completion WHITE
Embedded fixing
Lighting: White or Hot White
Tension: 12 V
Consumption: 1.44 W
Diameter = 65 mm
Thickness = 24 mm
Diameter of embedding: 51.6 mm
Depth of embedding: 19 mm
Circuit of Led coated with Epoxy:
Resisting water, corrosion and the vibrations
Equivalent with a traditional bulb from 8 to 10 W
Reference: 05ROWH18-65-VAR
|
|
| ... products without information |
| |
|
|
see the results for the following category :