|
|
|
|
|
|
|
To collect excess resin from composite manufacturing processes, reducing the risk of resin entry to vacuum pumps and central vacuum lines. With a simple modification to the vacuum tubing glands, the vessel may also be used as a resin degassing and feed pot.
Heavy duty aluminum lid with quick release knobs
76 mm (3") diameter replaceable glass view-port to allow observation of contents
External O-ring sealed vacuum line connections to reduce resin buildup
Extra tall outer vessel to accommodate large volume 11 litre resin bucket. The large total vessel volume of 19 litres (5 US gallons) also provides a useful vacuum reservoir in power failure situations
Side mounted isolation valve - used for leak testing and to rapidly isolate the trap from the vacuum system
Side mounted vacuum gauge and controlled-rate air admit valve to reduce resin disturbance on air admit. The gauge and air admit valve remain in place when the lid is removed to change the resin bucket. This reduces the likelihood of damage and reduces "clutter" on the lid
Heavy duty mobile base
|
|
|
|
|
|
|
PrecisionTECH™ RTM covers the entire process from design consultation of the customer’s unique system, to the training of personnel after the system has been installed. To begin, MVP offers expert consultation for the design of the customer’s specific system, even up to designing a turn-key line for larger operations.
After the initial needs have been determined and designs have been completed, the expert MVP fabrication team will build the part-specific TechLock™ Clamp system. For automation, the OptiLogic™ Control and Uniport™ Injection Sprue will be incorporated.
PrecisionTECH™ RTM offers the most diverse line of high-quality pumping systems available on the market. From the basic Pro Pump ProVantage™ unit, to the standard volume RTM Primax™ System, to the high-volume Apex™ systems, Magnum Venus Products’ systems are able to grow with the customer’s business.
Once the system is complete, MVP offers expert training on the RTM process and the equipment in the operator’s shop.
Whether the customer needs manual or automated injection, Magnum Venus Products is the only manufacturer to cover Resin Injection from consultation to installation.
|
|
Spartan II PLC - designed for automated RTM Lite with touch screen programmable interface
GlasCraft's Spartan II PLC proportioner provides all the functionality of the Spartan II Deluxe, and adds the following performance-enhancing features for increased efficiency:
Touch screen programmable interface
30 programmable injection settings
Programmable digital gel timer
Programmable digital air / solvent flush
|
|
The GlasCraft Spartan II is the latest technology available from GlasCraft that is specifically designed for low-pressure injection of polyester and vinyl ester resin in Resin Transfer Molding (RTM and RTM Lite) Injection Applications. The Spartan II family comes in a variety of configurations that can be used in manual or automatic injection, depending on your needs.
The Spartan II is available in the following configurations:
Spartan II
Spartan II Deluxe
Spartan II PLC
Spartan II PLC with PAC
Spartan II PLC with PAC & RFID
|
|
GlasCraft's Spartan Resin Transfer Molding (RTM) Injection System is configured as a manual injection system. The Spartan is the industry standard for low cost, entry level injection systems and provides uncompromised performance.
The re-useable static mixing element can be initially cleaned with the air purge. The remaining resin and catalyst can be rinsed out with solvent, then followed by a drying air purge. This will leave the dispense head and mixing element clean, dry, and ready for the next injection.
The Pneumatic Trigger reduces pressure shock to the mold.
11:1 ratio Material Pump... durable, high-production design featuring a reliable 5" Air Motor which can develop to 1100 psi fluid pressure and delivering 2.5 gpm.
25 ft 1/2" Hoses allow for easy movement to and around molds. The 1/2" diameter allows effortless handling of filled materials.
ASME-approved 2 gallon stainless-steel Solvent Tank is standard. 5 gallon tank is an option.
|
|
RTM Light technology; also known as RTM Eco, has become very popular when it comes to producing small and medium series or a large number of different parts by using a simple, low cost method.
Each industry, and above all each particular need is a unique RTM light project. Matrasur Composites' job is to propose the appropriate equipment for each application, including industrialisation solutions when production quantities increase.
|
|
When production series require productivity associated with high quality, Matrasur Composites' Classic RTM solutions are the most adapted ones, bringing productivity requirements to the next level.
Matrasur Composites has designed an extensive range of RTM injection machines and turn key systems such as the Matrasur RTM Concept.
|
|
| ... products without information |
| |
Binks LEL
- MACT-compliant - non atomizing technology
- Easy maintenance
- Internal mix
- One-touch flush
|
|
The 2001 GW gun is a lightweight, hand-held, plural component spray gun for spraying limited applications of two-component materials, such as gel-coats or polyesters. The spray gun is operated in the conventional manner. The trigger action starts, and stops, the spray of both materials simultaneously. The two materials exit separately as an atomized spray from their respective nozzles and impinge on each other approximately 6" in front of the gun (resin) nozzle. Here, the resulting turbulence insures intimate mixing.
The "base" resin is "cured" by addition of a curative (catalyst) in a required ratio. In the 2001 GW gun, ratios of approximately 10:1 to perhaps 33:1 are possible by extending the curative with a compatible diluent.
|
|
|
Ideally suited for Vinyl Ester Applications requiring .5% to 3.5% catalyst ratios. This system is not designed for use with some glass flake vinyl ester resins. Binks vinyl ester outfit comes complete with a Binks Century vinyl ester spray gun, cart, 50 ft. each of air, catalyst and material hose assemblies, and a 55 gallon siphon hose assembly.
|
|
|
The Binks BOSS pump is designed to supply high-volume polyester or vinyl ester resins and organic peroxide catalyst used in the manufacture of fiberglass products. Output from fluid section - 15 gpm (57 litre/min) (max) 5 GPM@ 20 continuous cycles per minute recomended 0.5% to 3.5% catalyst ratio, adjustable.
|
|
Resin spray-up is one of the first steps in the mechanisation of laminate transformation in the thermoset industry. The productivity achieved can be quite spectacular. Around 60% of workforce savings can be reached through efficient resin spray-up. Moreover, low pressure techniques with head mix and the latest nozzle technologies are particularly operator and environmental friendly.
Matrasur Composites offers a large panel of machines specially adapted for this application, covering most part sizes and compatible with all resins today.
|
|
| ... products without information |
| |
For the production of COESHIP®-DECK-COATING the colour flakes need to be stirred into the transparent boat coating.
approx. 500 g per 750 ml tin
approx. 2 kg per 3 l pail
|
|
For the production of colouredcoatings. Just stir in the colour paste into the transparent coating to achieve the colours according to our colour chart (or create individual colour shades).
Available: cream white, rape yellow, pure orange, bright red, sapphire blue, sky blue, moos green, reseda-green, silvergrey, mahogany-brown, black, brillant white.
|
|
| ... products without information |
| |
|
FIBERGLASS SHIELD is a high performance, semi-permanent release coating specifically formulated to provide high gloss moldings of polyester resins and gel coats. It also offers effective multiple release efficiency with a wide range of molding compounds. For NON-VOC release agents, request technical data on ENVIROSHIELD.
|
|
| ... products without information |
| |
| ... products without information |
| |
... see all the products in the category
Paddles
|
|
|
