|
|
|
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs. These vacuum pumps operate completely oil-free; the individual chambers are separated by long-life vanes. Already featuring integrated intake filters and control valves, these vacuum pumps can be fitted with other accessories without a problem. The compact cover ensures low noise and heat emission. Optional corrosion protection also makes these vacuum pumps suitable for extracting moist air.
|
|
|
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs. The vanes are sealed by the metered supply of oil. Already equipped with integrated non-return valves and an efficient oil Separation system, these vacuum pumps can be fitted with other accessories without a problem. The standard-featured circulating-oil lubrication System with integrated oil cooler and cover additionally minimise noise emission. Controlled by a float valve, the oil return suction system also makes these vacuum pumps suitable for use in rough-vacuum applications. Optional water cooling significantly prolongs the life of the oil, even in difficult ambient conditions.
|
|
|
Driven directly by an integrated frequency inverter, these pumps no longer require any drive transmission. The area in which the units work is 100% oil-free. The integrated speed governor optimises the use of energy by matching delivery to actual demand. This creates high efficiency levels and minimises energy consumption. Suction air remains pulsation-free all of the time. Various accessories, such as intake filter, non-return valve, sound absorbers as well as the air delivery and discharge system, are integrated in the completely soundproof cover structure.
|
|
The VADS 1500 is a direct drive, air-cooled, rotary screw unit housed in a sound enclosure. Because it is directly driven, there are no gear boxes needed to control the rotational speed. Due to the variable frequency controller, the pump operates over a wide range of speeds. This allows you to operate today at the lower frequency, and at a higher frequency tomorrow when your plant gets expanded, or you add equipment. If your load varies, so does the speed of the pump to maintain the proper flow or pressure.
Dry operation
Direct drive - No drive transmission
Variable speed controlled
2.1 speed regulation
Sound enclosure standard
|
|
|
Using "multi-stage" compression, side channel vacuum pumps generate low-pulsation suction air. Perfected impeller design with curved blades guarantees Optimum efficiency. Separation of the compression chambers on both sides of the impeller permits single-stage, twin-flow as well as two-stage, single-flow operation with only one impeller. Vacuum filter and vacuum safety valve can be integrated as an optional extra in the patented design of the sound absorbers. The sound absorbers can be varied in length, affording flexible adjustment to available installation space.
|
|
Composite small-component manufacturing processes such as resin infusion and vacuum bagging.
This starter kit comes complete with an industrial vacuum pump, pump isolation valve, vacuum indicator gauge, in-line disposable filter and 5m of vacuum tubing.
|
|
Performance:
Max Volume:
50 GPM / 189 LPM
Suction Lift:
25ft / 7.6m / 23Hg
Discharge Head:
23ft / 7m / 10psi
Max Solids Size:
1.5" Dia.
Features:
Frame Size:
48"x15"x4" Extruded Aluminum
Durability:
Stainless Steel Transfer Cell - Powder Coated Aluminum Frame Frame-Oil Protected Air Pump.
Safety:
24V Push Button Controls with Shut Off Timer Included
Convenience:
Clean Out Access Cover, Clear Check Valves, Easy Access Control Panel
|
|
|
The sound insulation of our hoods is approx. 10-18 db(A). For better ventilation, our hoods are equipped with additional fans (1~ 230 V). These hoods are available as complete units including vacuum pumps (compressors) or equipped for retrofitting of your existing vacuum pumps (compressors).
|
|
|
VADS is the first direct-drive dry-running screw. With integrated speed controlling for demand-oriented applications and no need for a drive transmission, VADS is truly a Becker innovation! This unit is able to fulfil the highest requirements for a wide range of applications. By entering the load and output into your customer system, the air supply system automatically and directly adapts to the given requirements. The frequency-controlled drive unit offers a wide control range with optimised demand matching. In addition to energy savings and higher efficiency, this also results in lower maintenance requirements. The non-contact, oil-free screw unit ensures high air flows with low pulsation and lends itself to "master/slave" operation. Integrated accessories include a non-return valve, intake filter, sound absorbers and ventilation/bleed system. An air blast cooler is also available.
|
|
|
Simplicity of design with only one shaft and direct drive produces robust, long-lasting compressors with low maintenance and running costs. These compressors operate completely oil-free; the individual chambers are separated by long-life vanes. Already featuring integrated intake filters and control valves, these compressors can be fitted with other accessories without a problem. The blast-air cooler, which is also integrated, guarantees a very low blast air temperature. The compact cover ensures low noise and heat emission. Optional corrosion protection also makes these compressors suitable for extracting moist air.
|
|
|
Simplicity of design with only one shaft and direct drive produces robust, long-lasting compressors with low maintenance and running costs. The vanes are sealed by the metered supply of oil delivered by oil pump. The integrated, efficient oil Separation System provides the capability of producing blast air that is virtually free of oil. The cover minimises noise emission and permits application even in difficult ambient conditions.
|
|
| ... products without information |
| |
|
Sherwood Raw Water Cooling Pumps are specific to the engine marinizer's application. Click on further details to identify your pump and gather replacement pump, impeller, minor kit , and major kit information as well as operation instruction manuals and available pump prints.
|
|
|
Sherwood Raw Water Cooling Pumps are specific to the engine marinizer's application. Click on further details to identify your pump and gather replacement pump, impeller, minor kit , and major kit information as well as operation instruction manuals and available pump prints.
|
|
Heavy Duty Impeller Pump
A range of multipurpose bronze pumps. Compact design, raw water resistant pumps at an attractive price – with the renowned SPX Johnson Pump Marine quality. These pumps are designed for a number of applications on board.
With excellent self-priming capability, these pumps are ideal as cooling water pumps for marine engines, bilge pumps, deckwash pumps, fresh water pumps, fuel transfer pumps and other applications. Also ideally suited on shore to empty septic tanks, to flush clean and to fill water tanks.
Available in sizes from 3/8” to 1.½” (4 l/min to 279 l/min).
Vacuum switch (see page 32) as extra accessory for F8B-8 only.
|
|
Automatically Controlled Clutch Pumps - Heavy Duty Electro-Magnetic Clutch Pumps
With an electro-magnetic clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Combined with a vacuum switch (recommended for bilge pump application), the clutch will automatically disengage whenever the pump starts priming air, thereby preventing dry running and pump damage. Automatically controlled pumps are available in sizes from 1" to 2.1/2" (20 l/min to 625 l/min), with clutches in 12 or 24 volts. Wearing parts are easily replaceable and service kits are available for all standard models. Vacuum Switch as extra accessory.
|
|
Features:
- Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
- Easy to service and maintain.
|
|
Features:
- High head capability - 10 metres (32 feet.)
- Self priming up to 3 metres (9.6 feet.)
- Continuously rated
- Vibration tested
- IP55 protected motor
- 24V version with thermal cut-out protection
- Full range of installation accessories
- Customised kits for OEM customers
- ISO8846 Marine (Ignition Protection)
|
|
| ... products without information |
| |
Macerator Pump
The TA3P10-19 macerator pump takes care of toilet waste. A rotary cutter shreds waste before it is pumped into or out from the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet or the bowl discharge outlet. Note! Use unbleached lavatory paper only.
|
|
The sewage pump M is a self-priming diaphragm pump. It works without a macerator. Even bigger solids can be conveyed without damaging the pump because of the lip valves which have been installed. The self-locking valves make the pump non-reactive, i.e. it can be mounted to the side standing, hanging or sideways. The intake and discharge bent is revolving. This is necessary for better connecting possibilities of the suction and pressure hoses. The suction and pressure connections usually go from left to right. They can easily be changed, if the suction way should go from right to left or from the bottom to the top. All parts which come into contact with water can be ordered in red brass or aluminium. The pump can be delivered with a 12 V or 24 V motor.
Continuous operation 1 – 2 hours max.
Attention: The cross section of the pipe should never be less than 1 ½”/ 38 mm – or the pump capacity will not be achieved.
|
|
|
The Rheinstrom sewage pump FS 370 is a big, very hard wearing macerator pump which is suitable for continuous operation. It is not self-priming and therefore it must be installed either at the lowest part of the tank or lower than the tank itself. A macerator which chops up the conveying means is mounted in front of the pump. In case maintenance has to be carried out the pump’s body can easily be taken apart. In contrast to the sewage pump F the sewage pump FS 370 is suitable for continuous operation. Sewage tanks up to a size of 1 m³ are ideal for this pump.
|
|
|
|
|
|
|
WASTE EVACUATION
The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.
FISH BOX AND LIVEWELL TANK EVACUATION
The Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.
Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.
|
|
|
SHURflo’s Macerator pump is designed specifically for sanitation waste and fish box evacuations providing superior performance in harsh marine environments.
|
|
|
SHURflo’s Macerator pump is designed specifically for sanitation waste and fish box evacuations providing superior performance in harsh marine environments.
|
|
- Self-priming to a lift of six feet
- Flow rate to 6-1/2 gallons per minute
- Rated for continuous duty cycles of up to 1/2 hour ofuninterrupted pumping time (nearly 200 gallons ofsewerage transfer per cycle)
- Motor meets USCG regulation 183.410 and ISO 8846MARINE for ignition protection
- Motor is EMC compliant and CE marked
- Ports accept 1-1/2" hose with room for double bandclamps
- All pump components (non-flexible) are non-corrosiveplastic, stainless steel and bronze
- Diaphragm is made of Santoprene and the valves aremade of nitrile
- Pump housing is made of glass filled nylon
- The motor and gear drive are painted with a durableprotective coating
- A plastic motor splash guard adds additional protection
|
|
|
SANISPLIT is an automatic soil and waste water pumping unit, which collects the water from the kitchen and bathroom and pumps it into the collection tanks, even without the necessary gradient. SANISPLIT includes a powerful and silent centrifugal pump controlled by a pressure switch, which starts the pump as soon as the water arrives in the unit's collection tank.
|
|
|
|
see the results for the following category : 
