|
|
This new AutoAnchor offers all the well known features of the original AutoAnchor chain counters and windlass control systems plus several new innovations, including bow and stern thruster control, deck light control plus anchor wash control.
The AA710 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Full windlass control and chain counting from anywhere on the boat with the hand held wireless remote.
Controls bow and stern thrusters independently and together.
Features a preset stopping point on retrieval.
Easy-to-operate remote has a graphic LCD screen with an intuitive user interface.
Rode count, signal strength, battery level and windlass speed and direction are shown on the backlit display.
|
|
Panel mount AutoAnchors. The AA560 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Windlass control and monitoring from the helm.
Large LCD display with adjustable backlighting shows length of anchor rode deployed. Display in feet or metres.
One-touch automatic function deploys and retrieves a preset length of anchor rode.
Vessel is protected during anchor retrieval by preset windlass stopping point and docking alarm.
Safety lock protects windlass from accidental deployment.
Measurements and settings are saved on exit or if the battery fails.
Straightforward installation and set up with pre-programmed calibrations for rope/chain rodes.
Inbuilt diagnostics for troubleshooting installation issues.
Install up to two units or combine with the AA150 or AA601 for multiple stations.
Console available in black or grey.
Cover for weather protection.
|
|
All the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.
- High level wireless transmission security - 2.4GHz ISM band
- Hand held controller displays rode count plus signal strength and battery level
- Ergonomic shape with wrist strap connector
- Water resistant to IP65
- Rubber cover moulding for grip and non slip protection
- Console holder and protective cover
- Shockproof
- IEEE 802.15.4 compliant
|
|
The Control Box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and/or pierce the container, as all the terminals and the panel for the electrical connections are perfectly accessible from the outside.
Outer construction in self-extinguishing polyester resin, resistant to shock and marine corrosion. Degree of protection IP 56 - protection against deckwater.
|
|
This new remote control model LIBERTY has an elegant and functional design. The soft rubber case, which covers sideways the remote control, allows a safe and handy taking under any condition.
LIBERTY is completely waterproof and supplied with waterproof plug and socket (IP68) of the finest quality.
The extending flexible cable (approximately 4 metres) gives the maximum freedom on board during anchoring manoeuvring.
|
|
Wireless remote control:
With a radio control installed you will have full control of windlass operation where ever you are on board. The control consists of a transmitter and a receiver. With the AutomaticDownTM function the windlass will run automatically for 25 seconds before stopping. To enable the AutomaticDownTM just press the DOWN button on the receiver. To stop the AutomaticDownTM at any time, press DOWN once on the receiver.
|
|
|
To operate your windlass safely in all weather conditions you need top quality switch gear that can stand the roughness of the sea. Anchorlift uses only the best of materials to ensure you a sae and long service life of your equipment.
|
|
| ... products without information |
| |
|
With ever more efficient cargo working in port being the objective, modern dry cargo vessels are tending to develop to a more ‘open’ trend, i.e. the size of the hatches compared with the deck area is growing. This implies that there is less stowage space available for the hatch covers, which has made the high-stowing hydraulic folding covers very popular.
|
|
|
We have a wide range of basic hatch cover designs, which includes both hydraulic and non-hydraulic operated covers. These items include pontoon, hinged, folding, side rolling, and simple pull covers for weather decks as well as multi-stacking, folding, and sliding covers for tween decks.
|
|
|
We have a wide range of basic hatch cover designs, which includes both hydraulic and non-hydraulic operated covers. These items include pontoon, hinged, folding, side rolling, and simple pull covers for weather decks as well as multi-stacking, folding, and sliding covers for tween decks.
|
|
|
Single-panel types comprise one cover for each opening i.e. there are no joints. They are normally specified for bulk carriers in the case of single-opening abreast, and for cellular container ships in the case of multi-opening abreast configurations.
|
|
|
Piggy-back hatch covers are used on bulk carriers when the available deck space is insufficient to accommodate folding, side-rolling or end-rolling covers.
|
|
|
Side-rolling and end-rolling hatch covers are popular for use on the weatherdecks of larger bulk carriers such as Panamax and Capesize types. In the case of ore/bulk/oil (OBO’s) and ore/oil carriers, the covers are designed to sustain internal liquid loads.
|
|
|
The new Poly Planar RM-10 Radio Mount is designed to accommodate today%u2019s larger front panel format Marine radios as well as older DIN style and Post mount. Made from heavy wall ABS plastic, the RM-10 has room for all the accessory cables found on the newest radios. Accepts Poly Planar, Sony, Jensen, Marine AV and even Clarion CMD4!
|
|
|
Install virtually any auto or marine stereo on your boat without fear of damage from moisture, corrosion or UV rays. The WC400 is waterproof housing that surrounds your stereo on all sides for maximum protection. A gasket-sealed, polycarbonate splash cover on the front of the rugged ABS enclosure prevents water from entering. The hinged cover lifts easily and remains out of the way in any of several positions. When open, it maintains partial splash protection while still allowing access to stereo controls. Wires and a rear connector let you hook up the stereo and antenna through the housing. A gimbal mounting bracket permits installation above or below the dash, under an electronic box or on any convenient horizontal surface.
|
|
Salt waterproof marine radio housing and covers are designed to prevent the water permeated into the radio or CD player. All products are made in a strict quality control system, which are requested by ISO9001 terms. They have lab certificates to prove their features.
Features & Specifications :
- Radio cover is designed to protect water splashing on the boat and therefore extend radio life
- Two applications for DIN type and dual shaft type radio size
- U.V. stabilized A.B.S. plastic housing with poly-carbonate door
|
|
Salt waterproof marine radio housing and covers are designed to prevent the water permeated into the radio or CD player. All products are made in a strict quality control system, which are requested by ISO9001 terms. They have lab certificates to prove their features.
Features & Specifications :
- Radio cover is designed to protect water splashing on the boat and therefore extend radio life
- Compatible with DIN type dual shaft type and removable 12 volt stereo
- U.V. stabilized A.B.S. plastic housing with poly-carbonate door
- Rubber gasket around door provides all weather protection
|
|
| ... products without information |
| |
|
The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.
|
|
|
Fuse box NAVYLEC NL942 -111 12-24Vdc with 1 shunt for measurement of intensity, 4 power output-input protected by dual fuse holder ATO/MEGA, 4 aux. output-Input 15 A maxi. Led indication of fuse failure and contact for external alarm.
|
|
Electrical box for superyacht applications
Webasto also offers an electrical box for superyacht applications
according to MCA standards. Due to high customization,
please contact us directly in order to choose the right solution.
|
|
| ... products without information |
| |
FIX RoRo is a lashing cover for 20 feet RORO casettes, flats and bollsters.
Lashing capacity LC 2500daN, means breaking strength 5000 daN (50 kN). The patented lashing cover is made of woven polypropylene, coated with polyethylene. The materials chosen have excellent protection against UV-light, chemicals and abrasion. Practical experiences prove long life time from hot conditions in the Middle-East to freezing winds in Gulf of Bothnia.
Reinforcements are placed at every 1,3m in length to fit perfectly to common size paper coils and also pallet goods. Both ends are reinforced and there are extra material to cover the load over the corners.
Lenght of lashing lines can be chosen according to load height. Please take contact for additional information, custom sizes and options available.
|
|
FIX RoRo is a lashing cover for 30 feet RORO casettes, flats and bollsters.
Lashing capacity LC 2500daN, means breaking strength 5000 daN (50 kN). The patented lashing cover is made of woven polypropylene, coated with polyethylene. The materials chosen have excellent protection against UV-light, chemicals and abrasion. Practical experiences prove long life time from hot conditions in the Middle-East to freezing winds in Gulf of Bothnia.
Reinforcements are placed at every 1,3m in length to fit perfectly to common size paper coils and also pallet goods. Both ends are reinforced and there are extra material to cover the load over the corners.
Lenght of lashing lines can be chosen according to load height. Please take contact for additional information, custom sizes and options available.
|
|
FIX RoRo is a lashing cover for 40 feet RORO casettes, flats and bollsters.
Lashing capacity LC 2500daN, means breaking strength 5000 daN (50 kN). The patented lashing cover is made of woven polypropylene, coated with polyethylene. The materials chosen have excellent protection against UV-light, chemicals and abrasion. Practical experiences prove long life time from hot conditions in the Middle-East to freezing winds in Gulf of Bothnia.
Reinforcements are placed at every 1,3m in length to fit perfectly to common size paper coils and also pallet goods. Both ends are reinforced and there are extra material to cover the load over the corners.
Lenght of lashing lines can be chosen according to load height. Please take contact for additional information, custom sizes and options available.
|
|
FIX RoRo is a lashing cover for 45 feet RORO casettes, flats and bollsters.
Lashing capacity LC 2500daN, means breaking strength 5000 daN (50 kN). The patented lashing cover is made of woven polypropylene, coated with polyethylene. The materials chosen have excellent protection against UV-light, chemicals and abrasion. Practical experiences prove long life time from hot conditions in the Middle-East to freezing winds in Gulf of Bothnia.
Reinforcements are placed at every 1,3m in length to fit perfectly to common size paper coils and also pallet goods. Both ends are reinforced and there are extra material to cover the load over the corners.
Lenght of lashing lines can be chosen according to load height. Please take contact for additional information, custom sizes and options available.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
