|
|
The Webasto Water Station acts as a central unit for the heating of the vessel’s warm water heating system (such as radiators & fan heat exchangers). Additionally, domestic warm water is heated on demand using a Webasto Calorifier. The switching from central heating to domestic warm water heating is done automatically.
The Webasto Calorifier quickly and efficiently heats the domestic warm water by a separate coil from the engine and a coil from the Webasto water heater circuit. The additional electrical 230 V immersion heater
ensures the provision of domestic warm water at shore connection.
|
|
The Nautic Boilers are the result of Quick's long experience. Since 1998 Quick has been producing water heaters for boats, in its Nautic Boiler BX series.
The B3 project was devised from the need to create a quality line, competitive on all markets. The B3 Boilers are the simplest and safest answer to guarantee hot water on board without any type of problem, also thanks to the quality of the materials and structure. The container is in composite material and the tank is in AISI 316 stainless steel. The B3 Nautic Boilers are produced in versions of 15, 20, 25, 30 and 40 litres and are guaranteed for 3 years.
|
|
- High quality materials
- Heat exchanger with wide exchange surface
- Produces hot water from the electric element, that Is fitted with an adjustable safety thermostat.
- Relief / non-return vale that allows discharging of the water heater in case of disuse
|
|
The compact dimensions and capacity of the 16 litres 316 stainless tank satisfies a large part of the market. The BX16 is easy to install and highly
functional. On request it is available with the heat exchanger only (without electric element).
|
|
|
The BXS water heater range is distinguished by the square-shape design, making for particularly easy installation.
|
|
This series is equipped with a solid isolation, which guarantees a heat-storage of at least 24 hours. In comparison with other boilers on the market this boiler achieves the best utilization coefficient by using considerable longer heat exchanger. Sizes from 15 l – 115 l.
Special designs can be custom-built if requested, e.g. installation of a second and third heating coil in order to hook up two motors, a generator or electric water heater. Furthermore we are able to install several heating cartridges. It is also possible to install different connections for motor circuit and fresh water (connections for remote control thermometer etc.).
-Approved safety
-Five sizes
-Completely made of CU
-Longer heat exchanger
-Trouble-free installation
-Maintenance-free
-Cost-saving
The above mentioned values refer to a water temperature of 16 ° C and an indoor temperature of 18 ° C. The time needed for heating up the boiler depends on the feeder length and the power (KW) of the engine.
|
|
|
|
|
|
|
"With a QL water heater you really have a more comfortable life on board. A QL water heater quickly and easily provides enough water at the right temperature for a shower, washing up, shaving etc. The water in a QL water heater is heated by the energy released from the engine cooling system. Use is thus made of the heat that would otherwise go to waste. The water heater also has an immersion heater for connection to on-shore po-wer. An adjustable thermostat cuts off heating at the desired temperature. It has a heater cut-out to prevent boiling.
The water heater is available in 20, 30, 40 and 60 L (5-16 gallons) sizes. The tank is made completely in acid resistant stainless steel, which makes it very suit-able for the marine environment. The 1.5 mm thickness and TIG welded joints make the tank very strong and give in-creased corrosion protection. The design and materials also meet the highest sani-tary requirements.
The QL water heater is easily mounted, vertically or horizontally, with stainless steel brackets. To obtain maximum ef-fect the outlet is uppermost, whether installed vertically or horizontally. As an optional extra, a thermostatic mixer is available which reduces hot water con-sumption and protects against scalding."
|
|
Isotemp water heaters are specially designed for the use on yachts and boats. Only high quality components are chosen to ensure the best product performance. The marine water heaters are very robust; both the water tank and external cylinder are made of stainless steel.
- Robust design
- Water tank in stainless steel
- External cylinder in stainless steel
- Stable fixing feet in stainless steel, 360° adjustable fixing for easy and also bulkhead installation.
|
|
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
| ... products without information |
| |
|
PHU preheating unit for warming up the coolant liquid system of diesel engine
|
|
CJC%u2122 Jacket Water Modules are small, high-efficiency units suitable for cylinder heating in case of engine stops or shut downs. The standard range, for all types of engines, covers engines sized from 500 KW up to 100,000 KW.
Jacket Water Modules are often combined with cooling system water pumps in one module, and are supplied with switch-over valves and built-in steam heaters.
Each module is supplied with a control system to regulate temperature and flow.
|
|
|
Fuel supply and booster modules are inserted for the supply by diesel engines and merged between the daily tank and the engine into the fuel system. The fuel (heavy fuel oil, crude oil, diesel oil) is prepared in accordance with performance data of the different engine manufacturers (pressure, purity, viscosity).
|
|
Suitable for engine powers from 8000 to 26000 kW
Main Features:
- Maximal reliability and safety due to shell type heaters and separate viscosity and temperature controllers
- Fast and easy installation due to compact design
- Easy operation and maintenance due to our several decades of experience and continuous product development
- Long life span and flawless operation due to the best components, carefully chosen materials and sophisticated manufacturing system
|
|
The series of marine AMB Mc heavy fuel oil supply units is developed to combine the proven accessibility and easy service of the AMB-M series with a more compact outfit to meet the increasing demands of minimising the space required for any other purposes than passenger or cargo.
AMB heavy fuel oil supply unit for filtration, heating and pressurising of heavy fuel oil prior to injection into diesel engines.
|
|
Auxiliary equipment delivered for the diesel engines can be built on the engine, delivered loose or grouped in modules.
The systems are specified to minimize building and operating costs for specific combinations of main and auxiliary engines. Maximum compatibility is ensured when auxiliary systems are delivered together with main propulsion engines and diesel generator sets. Whenever necessary the auxiliary systems are tailored to optimize the operating performance.
|
|
|
The fuel oil system is one of the most critical systems on-board a sea going vessel. The reliability of the system is responsible for a safe passage. Therefore your fuel oil booster unit should be of a brand with an indisputable reputation. Eefting Engineering has this reputation.
|
|
- Portable or wall mounted low-noise fan heater
- Designed to meet applicable marine requirements
- Type approved
Specifications:
- Wall mounted or portable fan heater for marine and offshore applications.
- Corrosion resistant housing of hot zinc-plated and powder coated steel panels.
- Re-setable overheat protection.
- Low noice fan.
|
|
VMA-VMB
These air heaters are integrated units with axial flow fans and heating coils. Two versions are available, depending on the heat media being either boiler water or district heating water.
|
|
|
The electric marine heater type HWG is used to heat washrooms, showers, dry areas and stores. Its slim, upright design make it specially suitable for installation in areas where space is limited.
|
|
Living quarters, bathrooms, stores and engine rooms
Wall mounting
Incorporated thermostat with on/ off switch
Safety temperature limiter
|
|
The electric marine heaters of the HU and UE series meet the requirements of all well known classification societies.
Depending on the locality there is a choice between the on-the-wall type HU and the recessed type UE.
|
|
Wall mounted or portable fan heater for marine and offshore applications.
Corrosion resistant housing of hot zinc-plated and powder coated steel panels.
Re-setable overheat protection.
Low noise fan.
|
|
| ... products without information |
| |
Feature
-Applicable CODE
Every nation's CODE including ABS, LR, DNV,
GL, BV, KR, NK, RINA
- Applicable material.
CARBON STEEL, SUS, TITANIUM,
CU-ALLOY etc.
- Max. manufacturing condition.
Standard sea water fluid rate;10-400m3/hr. Non-standard is also available for over 400m3/hr
|
|
Steam Generators (Unfired)
Steam generators for heating, cleaning and de-icing purposes. These are particulary requested for chemical tankers, where the cleaning requirement is an issue.
Design: Horizontal or vertical, tube type.
Heating media: Thermal oil or Hot-water
Capacity range: 100 - 3.500 kg/h
Steam pressure range: 3 - 10 Bar (g)
Material: Mild steel or Stainless steel in various qualities.
|
|
AISI 316 Skidded 271 UHP pump type WOMA 752P26, with force-heated reservoir.
Q= 55 l/min @ 340 Bar / 34kW Eexd ATEX 100
Unit equipped with MultiVoltage el-controllers, suitable for Offshore / Marine installations.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
