|
|
Increased Power: 900 lumen & 13000 Lux
Protection Grade IP68
The internal lighting core is easely replaceable even with the hull in the water
Allowing easy upgrades of the LED technology or change in the color source
Thermal management included in the driver
Do not require remote stabilizer
Easy installation engineered product
Lenses specially treated against microorganisms
Low profile trim: for minimal water resistance
2-year Warranty on the material and 20.000 hours of functioning
|
|
The OceanLED Puck Light fixture is designed to be used in Steel, Aluminium or Fibreglass hulls.
Cofferdams - We recommend tube for the Cofferdam walls to be sourced by the shipyard during installation to save on freight costs. OceanLED then supplies a Welding Back Plate which affixes to the tube creating the final Cofferdam for the light to be mounted.
Alternatively full cofferdams can be supplied.
For fibreglass hulls the follows along the same principal design where a molded pocket in the Fiberglass hull allows water to flow in and around the LED light enabling sufficient cooling.
If a General Arranagement (GA) can be supplied, our design department can assist in cofferdam design for maximum cost efficiency.
Full Cofferdams are available from us on request.
|
|
|
|
|
|
|
The F-1 series offers a revolutionary new concept for underwater lighting for Super Yachts.
Achieving upto 25 degree hull angling within the fixture itself, it eliminates the need for massively long cofferdams, which improves Lamina flow and therefore fuel economy and ultimately speed whilst saving huge space inboard.
Being an LED powered unit (i.e. low maintenance) results in new thinking on yacht design. Old problems of access to 'traditional' underwater lights to change bulbs/service are now no longer as big a problem.
The F-1 Series is the most technically advanced underwater light every created. The unique 3 part delivery system offered by OceanLED ensures the very latest LED technology is utilized when the yacht is ready for launch.
Stage 1 - The Cofferdam assembly is delivered for the hot work (welding) to be completed.
Stage 2 - The electronics and cabling are supplied when needed.
Stage 3 - Light engine is delivered at the last stage to ensure the very latest LED technology is used.
The F-1 is currently being fitted to the latest new builds at the Feadship, Koninklijke De Vries Aalsmeer and Koninklijke De Vries Makkum facilities.
|
|
This underwater light with optic fiber provides a more powerful light than actual led-based lights.
This system gives you an unmatched quality of light games due to the powerful light source that allow to really create astonishing in water reflections.
Optical fiber is maintenance free, and life guaranteed.
|
|
Model S 1206: (Bronze) spotlight strong narrow beam
Will penetrate the water up to * 100 feet giving
a crisp detailed view of submarine life.
6 LED – 18 watt, 45 degrees beam, draw only
1.5 Amp at 12 volts, 750 Lumens at 9000 Kelvin.
Diameter 4 ½ (114 m/m) thickness 1” (25.4 m/m)
This model is supplied with external power regulator.
(12V/24V)
|
|
The Sea Vision SV10 model offers the largest aperture of all the fiberglass models giving maximum light output from the 150 watt metal halide lamp. It can be installed in the transom or the hull and is suitable for boats with 110-230 volt AC power, including sportfish, yachts and cruisers.
|
|
|
Underwater floodlights complete Yachtlite's extensive product palette for yachts. Yachtlite provides highest quality underwater floodlights with certification from a long-standing reputable manufacturer.
|
|
Model S 600: (Stainless Steel) flood wide angle illuminates up to * 30 feet around the transom area.
6 LED – 12 watt will draw only 1 Amp at 12 volts.
Large 100 degrees angle, 350 Lumens at 7200 Kelvin.
Diameter 3 1/8 (80 m/m) thickness 9/16 (15 m/m)
|
|
Model S 1515: (Bronze) Powerful 15 LED flood angle will illuminate up to * 100 feet.
15 LED – 36 watt, 90 degree beam angle.
Draw 3 Amp at 12 volts, 1610 Lumens at 8400 Kelvin.
Diameter 5 3/4 (146 MM) thickness 11/16 (27 MM)
The S 1515 is supplied with external power regulator
|
|
|
|
|
|
|
Industry's largest display in the smallest chassis frame...
Nauticomp's Glass Bridge displays offer the largest display in the smallest housing, minimizing overall dimensions, enabling multiple displays to be mounted and maximizing available space. Glass Bridge Series range from 12.1" through to 21.3" in either Daylight or Sunlight readable variants.
Each display is fitted with interface circuits that allow it to be connected with up to ten (10) inputs ranging from RGB, VGA, DVI-I, S-Video, Component & Composite Video sources. The display can accept signals of lower resolution, such as VGA. These signals are scaled so that they are displayed full screen.
Along with conventional LCD brightness and contrast controls, the display has an advanced dynamic brightness dimming technique, permitting full brightness to "Dim to Red" selectable at any brightness which is typically employed during night-time operation at low backlight levels.
A unique but simple remote On Screen Display (OSD) user interface known as the GB Commander allows the user to adjust a wide variety of display parameters. Simultaneous control of backlight brightness for up to ten (10) Glass Bridge Displays can be achieved via one GB Commander.
All displays are designed for operation from an external regulated 12.4V DC supply.
Nauticomp offers a wide range of external power supplies to match the power consumption - 12V DC, 24V DC & 110/230V AC.
|
|
|
Following the line for our commitment to thin edge design, and the cleanest possible look for your pilothouse, the Centric GB displays from Nauticomp keep the complete look and feel of a “Glass Bridge” of the future. This line of type approved displays meet the demands of today’s high end recreational yachts, and commercial vessels alike. All units have been designed for multiple display installations with a compact remote designed to control up to 5 displays from a single keypad! Multiple inputs, allow today’s high tech captain to have all sources, available at each display, with total redundancy. Design your pilothouse around the Centric GB, and combine the real “Glass Bridge”, with first class quality of Nauticomp products.
|
|
|
|
|
|
|
What's so special about Aadaptiv GB Monitors:-
• High Peformance - HD & Widescreen 16:10
• Multifunctional - 11 Source Inputs
• Integrated Control - Supports Multiple Monitors
• Dual Voltage - Accepts AC & DC supply
• IMO Compliance - ABS, IEC:60945, 61174 & 62388
Designers, Integrators and Captains will find AAdaptiv’s GB Monitors the solution to their seamless integration needs. Maritime certification for recreational and commercial vessels has been achieved without sacrificing pure glass design aesthetics and operational functionality.
Designed with both new-build and refit applications in mind, AAdaptiv’s LCD panel sizes, including Widescreens, offering “Mix and Match” combinations with full control integration capability and space optimization.
AAdaptiv’s Glass Bridge Monitors utilize a unique remote. These remotes provide individual control for Backlight Brightness, OSD Functionality and Signal Source for up to 7 GB Monitors.
Monitors. Each Glass Bridge Monitor is equipped with two dedicated ports enabling daisy-chain configurations between multiple Glass Bridge Monitors using standard and Ethernet cables.
Key features include Deep Dimming Backlight Brightness control down to less than 1 cd/m² (NIT) to meet ECDIS requirements. Our Glass Bridge Monitors are equipped with the facility to accept AC and/or DC power - enabling control system redundancy.
AAdaptiv’s Glass Bridge Monitors are ABS Type Approved with additional certification of IEC 60945 (Marine Communications), IEC 62388 (Radar/AIS/ARPA) and IEC 61174 (ECDIS).
A Glass Bridge Monitor by AAdaptiv Technologies. It’s a command decision for the digital world...
|
|
|
Hatteland Display is the first port of call for system integrators requiring marine displays from small sizes up to large widescreens, computers and panel computers. Our ability to customise our products increases our flexibility even further and ensures our customer's get equipment to their exact specification, whatever that may be.
|
|
The G Marine Monitors offer unmatched performance and versatility. Engineered to meet the integration demands of the modern vessel, all four displays feature multiple input capabilities, rugged aluminium construction and Raymarine's world renowned, ultra bright sunlight viewable display technology.
Use the G Marine Monitors for:
On board PCs with RayTech RNS software
On board CCTV camera monitoring (i.e. CAM100/CAM50)
Entertainment devices (Satellite TV, DVD and game consoles)
Other on board PC applications
Any navigation device or system with a VGA or DVI output
|
|
The VDS 319 P display provides a standard SXGA 19” LCD/TFT panel with a non-compromising mechanical design and excellent performance.
A proven glass bonding process leads to drastically reduced light reflection and improved contrast, enabling perfect readability even in very low-light environments and keeping mechanical robustness at the top.
Enclosure has been designed to minimize the distance between adjacent panels, making VDS 319 P ideal for glass bridge installations.
The display complies with EN 60945 and RINA Rules 2007 regulations.
|
|
The VDS 317 P display provides a standard SXGA 17” LCD/TFT panel with a non-compromising mechanical design and excellent performance.
A proven glass bonding process leads to drastically reduced light reflection and improved contrast, enabling perfect readability even in very low-light environments and keeping mechanical robustness at the top.
Enclosure has been designed to minimize the distance between adjacent panels, making VDS 317 P ideal for glass bridge installations.
The display complies with EN 60945 and RINA Rules 2007 regulations.
|
|
The VDS 317 D display provides a standard SXGA 17" LCD/TFT panel with a non-compromising mechanical design and excellent performance.
A proven glass-bonding process leads to drastically reduced light reflection and improved contrast, enabling perfect readability even in very low-light environments and keeping mechanical robustness at the top.
Enclosure has been designed to minimize the distance between adjacent panels, making VDS 317 D ideal for glass bridge installations.
The display complies with EN 60945 and RINA Rules 2007 regulations.
|
|
The VDS 319 D display provides a standard SXGA 19" LCD/TFT panel with a non-compromising mechanical design and excellent performance.
A proven glass bonding process leads to drastically reduced light reflection and improved contrast, enabling perfect readability even in very low-light environments and keeping mechanical robustness at the top.
Enclosure has been designed to minimize the distance between adjacent panels, making VDS 319 D ideal for glass bridge installations.
The display complies with EN 60945 and RINA Rules 2007 regulations
|
|
The multistair, a ship-to-shore stair, with 4 mm teak covering on the carbon fibre structure, individually adapted to the corresponding sailing or motor yacht. The use of carbon fibre and stainless steel ensures 100% corrosion resistance.
Whether for access from the side or the stern directly into the cockpit. All steps to the entry platform will automatically align horizontally to the sea level. Even the hand rail will perfectly adapt to the corresponding inclination.
We offer two types of the multistair: "Rotunda" (with sviel platform) and "Quadriga" (without sviwel platform).
Please feel free to contact us for an individual offer!
|
|
retractable diving board model 1T01
Ideal on boats used for charter with numerous guests to be entertained and perfect for medium sized boats as it can be positioned either aft, fore or on the fly. The board, in polyester and fibreglass, is mounted on a traverse trolley in varnished AISI 316 stainless steel that retracts into a closable compact anodized aluminium sleeve box. Colour schemes, length, type and finish can all be personalized to meet with customer requirements.
|
|
Hydromar is manufacturing the SEAWALK gangways for many years now.
In the past decades this product has been developed from a custom build product to a semi-standard build Mediterranean gangway.
Besides the standard range with its wide range of variables Hydromar also develops and produces fully custom solutions to fulfil the yachts special versions.
Both products have been designed to create a high quality and firm gangway with good looks as the gangway is your first step onto the yacht.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
