|
|
|
|
|
|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED.
|
|
The most powerful underwater light available is from OceanLED - the NEW 4010 Super Nova lives up to its name.
At twice the power of a 3010, the 4010 Super Nova is a hybride of the ever popular 1" Thru Hull. Utilizing a slightly larger hole cut out at 1 1/2" the 4010 Super Nova offers the largest light output of any underwater light available on the market, and is a landmark in LED technology.
If you want the best and the biggest underwater light - then the 4010 Super Nova is it.
Suitable for Fiberglass, GRP and wooden hulls and also for use on aluminium/steel hulls using the delrin sleeve.
All lights utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Available with Super White LEDs, Super Blue LEDs and the Super Green LEDs.
Currently under going full Lloyds Type Approval.
|
|
The original Thru-Hull with the worlds smallest hole cut-out for a thru hull light at only 1"! This light with a 30mm profile head makes it ideal for Transom mount applications. A very quick to fit and effective underwater light.
Suitable for Fiberglass, GRP and wooden hulls and now also available for use on aluminium/steel hulls using the delrin sleeve.
Lloyds Type Approved, RINA, ABS Type Approved, USCG Ignition Protected and ABYC H-27 Side Load approved.
All lights utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Available in 1010, 1520, 2010 & 3010 Series with Super White LEDs, Super Blue LEDs and the Super Green LEDs.
|
|
The Flush Mount from OceanLED has an exceptionally low profile giving it virtually unlimited Hull Mounting options. This light can be retro-fitted into most existing underwater lighting hole cut outs, offering immediate benefits of no Startup power surge, low heat, minimal maintenance and improved light output.
Suitable for Fiberglass, GRP and wooden hulls and now also for use on aluminium/steel hulls using the delrin sleeve.
Low profile bezel offering almost unlimited mounting possibilities.
Lloyds Type Approved, RINA, ABS Type Approved, USCG Ignition Protected and ABYC H-27 Side Load approved.
All lights utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Available in 1520, 2010 & 3010 Series with Super White LEDs, Super Blue LEDs and the Super Green LEDs.
|
|
|
|
|
|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED
|
|
Increased Power: 900 lumen & 13000 Lux
Protection Grade IP68
The internal lighting core is easely replaceable even with the hull in the water
Allowing easy upgrades of the LED technology or change in the color source
Thermal management included in the driver
Do not require remote stabilizer
Easy installation engineered product
Lenses specially treated against microorganisms
Low profile trim: for minimal water resistance
2-year Warranty on the material and 20.000 hours of functioning
|
|
|
|
|
|
|
The F-1 series offers a revolutionary new concept for underwater lighting for Super Yachts.
Achieving upto 25 degree hull angling within the fixture itself, it eliminates the need for massively long cofferdams, which improves Lamina flow and therefore fuel economy and ultimately speed whilst saving huge space inboard.
Being an LED powered unit (i.e. low maintenance) results in new thinking on yacht design. Old problems of access to 'traditional' underwater lights to change bulbs/service are now no longer as big a problem.
The F-1 Series is the most technically advanced underwater light every created. The unique 3 part delivery system offered by OceanLED ensures the very latest LED technology is utilized when the yacht is ready for launch.
Stage 1 - The Cofferdam assembly is delivered for the hot work (welding) to be completed.
Stage 2 - The electronics and cabling are supplied when needed.
Stage 3 - Light engine is delivered at the last stage to ensure the very latest LED technology is used.
The F-1 is currently being fitted to the latest new builds at the Feadship, Koninklijke De Vries Aalsmeer and Koninklijke De Vries Makkum facilities.
|
|
The OceanLED Puck Light fixture is designed to be used in Steel, Aluminium or Fibreglass hulls.
Cofferdams - We recommend tube for the Cofferdam walls to be sourced by the shipyard during installation to save on freight costs. OceanLED then supplies a Welding Back Plate which affixes to the tube creating the final Cofferdam for the light to be mounted.
Alternatively full cofferdams can be supplied.
For fibreglass hulls the follows along the same principal design where a molded pocket in the Fiberglass hull allows water to flow in and around the LED light enabling sufficient cooling.
If a General Arranagement (GA) can be supplied, our design department can assist in cofferdam design for maximum cost efficiency.
Full Cofferdams are available from us on request.
|
|
This underwater light provides you the power of 6 LED
with just a little pierce in the hull for cable.
Easy to install.
Made in solid aluminium with a hight resistence front lens.
Low power consumption (30A/h at 24 V) and excellent light output.
We are looking for distributors / dealers for free Zones.
|
|
|
|
|
|
|
Finally, a high quality surface mount underwater boat light that does not require any compromises. The 12 LED On-Hull SeaLite® was created for boat owners that want to dramatically illuminate the water behind their boat, without installing a fitting through the transom. Engineered to be extremely rugged and reliable, this unit provides incredible light output in a compact, cost effective package. All of the electronics are integrated into the watertight housing, requiring only a small ½” hole through the transom for the power cable. Thermal compensation circuitry automatically regulates the temperature of the LEDs, allowing them to operate in water or air. The 12 LED On-Hull SeaLite® has special circuitry that allows it to double as a fish attracting strobe light with the flick of a switch and also includes an exclusive dimming feature so you can set the perfect mood. With an ultra long life, the 12 LED On-Hull SeaLite® requires no bulb maintenance!
The 12 LED On-Hull SeaLite® provides the peace of mind in knowing that it was designed by a company with over 25 years experience manufacturing underwater lights for deep diving submersibles, offshore oil and commercial divers.
|
|
Seablaze2 Underwater light leverages the ease of installation, high intensity and extreme durability of the original SeaBlaze, but offers 15% greater output and an even more attractive appearance. All control circuitry is contained within the fixture, so no external drive modules are needed. The luminaire requires only a small through-transom wire hole, so installation is fast and easy. Available in ultra-bright white or blue output. 10 to 30VDC, draws 950mA @ 12V, 475mA @ 24VDC.
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
SeaBlaze3 (dual color) Underwater LED Light
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
1W Single chip, 316 stainless steel, fixed low voltage LED fittings
IP68 Rated screw threaded body with silicon seals and hexagonal lock-nut allows fitting in underwater environments.
Mounting surface thickness - Min. 2mm, Max. 12mm
NON-REPLACEABLE white LED life of up to 30,000 hours (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)
Submersible to a depth of 1m
Fitted with 1m of cable for connection to a 350mA Constant Current LED driver (N.B. to be wired in SERIES)
Maximum 9pcs connected to a 9W Constant Current LED controller
Cool operating temperature
Available in stainless steel finish
Dimmable with AU-LEDD16CC driver and AU-DSPLED dimmer unit
|
|
|
|
|
|
|
For decades DeepSea Power & Light has been designing innovative underwater products that exceed industry standards. The MiniLED Thru-Hull SeaLite® was engineered to fill a need for a powerful, rugged light, in a compact package.
Utilizing the latest in high brightness LED technology, the MiniLED Thru-Hull SeaLite® provides incredible light output for its size. The MiniLED Thru-Hull SeaLite® is ideal for center console boats, where space is at a premium, and price is an important consideration. All electronics are integrated in the watertight housing, providing protection and simplifying installation. Simply run the power cable from the back of the light to your power source – there is no driver box to mount or interconnect cable to route. The MiniLED Thru-Hull SeaLite® is even serviceable from inside the boat. With an ultra long life, the MiniLED Thru-Hull SeaLite® requires no bulb maintenance!
The MiniLED Thru-Hull SeaLite® provides the peace of mind in knowing that it was designed by a company with over 20 years expertise as a leading manufacturer of underwater lights for deep diving submersibles, offshore oil and commercial divers. Thru-Hull SeaLites® - whiter, brighter and more durable.
|
|
|
|
|
|
|
For decades DeepSea Power & Light has been designing innovative underwater products that exceed industry standards. The new 18 LED Thru-Hull SeaLite® is the next evolution of the proven Thru-Hull SeaLite® design.
Several features come together in the 18 LED Thru-Hull SeaLite® to create a light that offers amazing light output, is extremely rugged and most importantly, safe. There are 18 high color temperature LEDs, each with its own reflector to distribute the light for maximum effect. Thermal compensation circuitry regulates the temperature of the LEDs, improving the life of the LEDs and allowing the light to be run in air. The 316 stainless steel housing has two double seals, ensuring that the 18 LED Thru-Hull SeaLite® will remain watertight, even in the harshest environments. To simplify installation, the driver board is integrated into the watertight housing. The 18 LED Thru-Hull SeaLite® is even serviceable from inside the boat. And, with an ultra long life, the 18 LED Thru-Hull SeaLite® requires no bulb maintenance!
The 18 LED Thru-Hull SeaLite® provides the peace of mind in knowing that it was designed by a company with over 20 years expertise as a leading manufacturer of underwater lights for deep diving submersibles, offshore oil and commercial divers. Thru-Hull SeaLites® - whiter, brighter and more durable.
|
|
UNDER HULL SPOT LIGHT
Codice prodotto: EPFB0001
The thinnest and most powerful under hull spot light ever made. The LED lights with which it is made of give out the brightness correspondent to an alogen lamp of more than 100 Watt. Minimum dimensions, extremely low consumption, with a fixing hole to be made of less than 2 cm.
|
|
The only Underwater Light for Sailing Boats. Power Supply with LED protection against heat in case the product is accidentally powered out of water.
It uses a Through Hull normally used for LOGs. Easy to install and maintain.
-Aluminium Bronze Body
-Vin: 10-30VDC
-18W LED
-1000 lumen
-Light color available: Pure white 6500°K, BLU, GREEN
|
|
Model S 1206: (Bronze) spotlight strong narrow beam
Will penetrate the water up to * 100 feet giving
a crisp detailed view of submarine life.
6 LED – 18 watt, 45 degrees beam, draw only
1.5 Amp at 12 volts, 750 Lumens at 9000 Kelvin.
Diameter 4 ½ (114 m/m) thickness 1” (25.4 m/m)
This model is supplied with external power regulator.
(12V/24V)
|
|
Model S 800: (Bronze) Powerful 12 LED flood wide angle
will illuminate up to * 50 feet.
12 LED – 16 watt, 90 degree beam angle.
Draw 1.3 Amp at 12 volts, 450 Lumens at 8400 Kelvin.
Diameter 3 ½ (88 m/m) thickness 11/16 (18 m/m)
The S 800 is supplied with external power regulator
|
|
|
The UL Ti MATE 80 20 watt LED is available in 12 or 24 volt.
|
|
Description:
- Polished or Chrome Plated Bronze with Mounting Ring
- 10 Feet of 16/2 Electrical Cable
- Safety Seal Design Prevents Water Intrusion in the Event of Glass Breakage
- Terminal for Bonding Wire
- L.E.D.'s Provide Longer Life, Less Heat and 1/10th the Energy of Standard Lights
|
|
The triple LED dock light (Ref. S40351) uses three 3 watt LED’s. The light is IP 68.
If this light is to be used underwater, the driver required is S41105 for each individual light.
If this light is to be used above water, the driver required is S41104 for every 2 lights.
|
|
Model S 1515: (Bronze) Powerful 15 LED flood angle will illuminate up to * 100 feet.
15 LED – 36 watt, 90 degree beam angle.
Draw 3 Amp at 12 volts, 1610 Lumens at 8400 Kelvin.
Diameter 5 3/4 (146 MM) thickness 11/16 (27 MM)
The S 1515 is supplied with external power regulator
|
|
Model S 600: (Stainless Steel) flood wide angle illuminates up to * 30 feet around the transom area.
6 LED – 12 watt will draw only 1 Amp at 12 volts.
Large 100 degrees angle, 350 Lumens at 7200 Kelvin.
Diameter 3 1/8 (80 m/m) thickness 9/16 (15 m/m)
|
|
SCOUT OF HULL 6 LED 1w RED, VARI (angle 60°)
As an indication, a traditional halogenous bulb of 50-55 W replaces
6 LED of power
Scout of Hull with integrated driver
Detailed description:
Diameter: 90 mm
Thickness: 10 mm
Tension: 10 to 30 V AC OR cd. (system of regulation integrated)
Consumption: 6 W
Lighting: RED
Reference: 04HULL 6VARI RED
|
|
FishGLOW Underwater LED Lights for Boats
FishGLOW lights utilize the latest state of the art, high output, 12-volt, Light Emitting Diodes (LED's) as their source. The emerging LED technology allows for lower power consumption, improved reliability and increased longevity over conventional lighting. FishGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The curcuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount FishGLOW lights on the transom, at least 6-8 inches below the water line. Then pass the included 12' marine grade power cable from each light, through a small opening above the hull's water line or a suitable existing opening in the transom. FishGLOW lights connect to the included 20' power supply cable with a simple-to-use, color coded quick connect, which plug together in only one way.
|
|
|
Use the LED flashlight to show the sea creatures in the night, floodlight to show off the outline of the marine, the illuminative light as new fashion illumination.Water-proof,stainless steel cover,safe,high brightness and as long as 50000 working hours.
|
|
|
Use the LED flashlight to show the sea creatures in the night, floodlight to show off the outline of the marine, the illuminative light as new fashion illumination.Water-proof,stainless steel cover,safe,high brightness and as long as 50000 working hours.
|
|
DockGLOW lights are ideal for backyard docks, marinas, waterfront restaurants, sea walls, resorts, etc. They utilize the latest state of the art, high output, Light Emitting Diodes (LED's) as their source. DockGLOW LED's are designed to run off standard 110 Volt household current through the use of a UL certified power supply box. DockGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The circuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount DockGLOW lights on the pylon, at least 6-8 inches below the water line (below the low tide water line). Then run the included 30' marine grade power supply cable to the power supply junction box (included). The cable connectors offer a simple-to-use, quick connect, which plug together in only one way.
|
|
| ... products without information |
| |
|
|
