|
|
|
|
|
|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED.
|
|
This underwater light provides you the power of 6 LED
with just a little pierce in the hull for cable.
Easy to install.
Made in solid aluminium with a hight resistence front lens.
Low power consumption (30A/h at 24 V) and excellent light output.
We are looking for distributors / dealers for free Zones.
|
|
|
|
|
|
|
Finally, a high quality surface mount underwater boat light that does not require any compromises. The 12 LED On-Hull SeaLite® was created for boat owners that want to dramatically illuminate the water behind their boat, without installing a fitting through the transom. Engineered to be extremely rugged and reliable, this unit provides incredible light output in a compact, cost effective package. All of the electronics are integrated into the watertight housing, requiring only a small ½” hole through the transom for the power cable. Thermal compensation circuitry automatically regulates the temperature of the LEDs, allowing them to operate in water or air. The 12 LED On-Hull SeaLite® has special circuitry that allows it to double as a fish attracting strobe light with the flick of a switch and also includes an exclusive dimming feature so you can set the perfect mood. With an ultra long life, the 12 LED On-Hull SeaLite® requires no bulb maintenance!
The 12 LED On-Hull SeaLite® provides the peace of mind in knowing that it was designed by a company with over 25 years experience manufacturing underwater lights for deep diving submersibles, offshore oil and commercial divers.
|
|
Seablaze2 Underwater light leverages the ease of installation, high intensity and extreme durability of the original SeaBlaze, but offers 15% greater output and an even more attractive appearance. All control circuitry is contained within the fixture, so no external drive modules are needed. The luminaire requires only a small through-transom wire hole, so installation is fast and easy. Available in ultra-bright white or blue output. 10 to 30VDC, draws 950mA @ 12V, 475mA @ 24VDC.
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
SeaBlaze3 (dual color) Underwater LED Light
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
Model S 800: (Bronze) Powerful 12 LED flood wide angle
will illuminate up to * 50 feet.
12 LED – 16 watt, 90 degree beam angle.
Draw 1.3 Amp at 12 volts, 450 Lumens at 8400 Kelvin.
Diameter 3 ½ (88 m/m) thickness 11/16 (18 m/m)
The S 800 is supplied with external power regulator
|
|
SCOUT OF HULL 6 LED 1w RED, VARI (angle 60°)
As an indication, a traditional halogenous bulb of 50-55 W replaces
6 LED of power
Scout of Hull with integrated driver
Detailed description:
Diameter: 90 mm
Thickness: 10 mm
Tension: 10 to 30 V AC OR cd. (system of regulation integrated)
Consumption: 6 W
Lighting: RED
Reference: 04HULL 6VARI RED
|
|
FishGLOW Underwater LED Lights for Boats
FishGLOW lights utilize the latest state of the art, high output, 12-volt, Light Emitting Diodes (LED's) as their source. The emerging LED technology allows for lower power consumption, improved reliability and increased longevity over conventional lighting. FishGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The curcuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount FishGLOW lights on the transom, at least 6-8 inches below the water line. Then pass the included 12' marine grade power cable from each light, through a small opening above the hull's water line or a suitable existing opening in the transom. FishGLOW lights connect to the included 20' power supply cable with a simple-to-use, color coded quick connect, which plug together in only one way.
|
|
|
Use the LED flashlight to show the sea creatures in the night, floodlight to show off the outline of the marine, the illuminative light as new fashion illumination.Water-proof,stainless steel cover,safe,high brightness and as long as 50000 working hours.
|
|
|
Use the LED flashlight to show the sea creatures in the night, floodlight to show off the outline of the marine, the illuminative light as new fashion illumination.Water-proof,stainless steel cover,safe,high brightness and as long as 50000 working hours.
|
|
The Flush Mount from OceanLED has an exceptionally low profile giving it virtually unlimited Hull Mounting options. This light can be retro-fitted into most existing underwater lighting hole cut outs, offering immediate benefits of no Startup power surge, low heat, minimal maintenance and improved light output.
Suitable for Fiberglass, GRP and wooden hulls and now also for use on aluminium/steel hulls using the delrin sleeve.
Low profile bezel offering almost unlimited mounting possibilities.
Lloyds Type Approved, RINA, ABS Type Approved, USCG Ignition Protected and ABYC H-27 Side Load approved.
All lights utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Available in 1520, 2010 & 3010 Series with Super White LEDs, Super Blue LEDs and the Super Green LEDs.
|
|
| ... products without information |
| |
|
|
|
|
|
Engineers at Bob's Machine Shop have developed a product that all boaters can use.
With a maximum engine rating of 40 hp, BMS's hydraulic kicker jackplate provides slow-speed power for cruisers, auxiliary power for sailboats and trolling power for fishermen.
Sailboat skippers will appreciate the jackplate's ability to reduce engine drag while under sail.
For economy, powerboaters can fire up their kicker for no-wake zones, slow cruising or when navigating shallow backwaters. And, the jack provides anglers with the option of using just one motor for trolling and main power.
The kicker jack is built with 6061 T-6 aircraft-grade aluminum to ensure high strength with minimal weight. All of Bob's Machine's hydraulic jackplate motors are mounted inside the boat for long life and easy maintenance.
An optional wireless control kit allows the skipper to operate the jackplate remotely with a small key fob from anywhere on the boat.
Retail price of Bob Machine Shop's patent pending, hydraulic kicker jackplate is $1,199. It comes with a limited lifetime warranty on the structure.
|
|
|
Bob's Machine Shop jack plate. Manual adjustments made with wrench. Cheaper than hydraulic, but offers same look as Bob's high quality hydraulic jack plate. Versa jacs can be upgraded to hydraulic at a later date with Bob's Versa Change Over kit.
|
|
Bob's Machine Shop standard line of jack plates. 4, 6, 8, 10 and 12 inch setbacks. All offering a minimum of 7.5 inches of lift above the standard mounting position. Rated for a Max of 300 HP, V6 engines, the standard Jac plate line is able to handle almost every outboard.
Jack Plates allow access to shallow water, increase the speed of the boat, increase fuel economy, and increase acceleration. By setting the engine back further, you are putting your propeller into cleaner water, increasing prop bite. Also the water uncompresses from under the transom, allowing you to raise the motor and reduce drag (increasing speed)
|
|
Available in 8 inch Setback Jackplate #MJ8 and Heavy duty 5 inch Jackplate #MJ5
Also available for extreme conditions such as offshore racing #MJH.
Manual Jack
Overall Width= 17 7/8" - Overall Height= 14" - Weight= 19 lbs.
|
|
|
|
|
|
|
Bob's Machine Shop has just launched a new line of jack plates for smaller boats with lower-hp engines. The lightweight Mini Jacs feature a smaller footprint and, depending on the model, will handle engines up to 50 hp.
High-performance boaters use jack plates for more speed, better fuel economy and improved boat handling. In recent years, jacks have also become popular with fishermen and pleasure boaters who operate in shallow water.
Mini Jacs come in three models: The standard version weighs 28 pounds and has same dimensions as BMS's regular jack plates. It fits the standard BIA bolt pattern and provides 6" of hydraulic lift.
Mini Jacs also come in a narrower width for smaller boats with clamp-on style motors. This model weighs 25 pounds but still provides 6" of lift.
The smallest Mini Jac weighs only 18 pounds and works well with small, Gheenoe-style boats with clamp-on engines. This model supplies 4" of hydraulic lift and handles engines up to 40 hp. All Mini Jacs come with a 5-1/2" setback.
Bob's Machine Shop's jack plates use hi-tech bearings that will not absorb water. They also feature automobile-type grease fittings - a unique feature among jack plates. All BMS hydraulic pumps are mounted inside the boat to lower the overall weight on the transom and minimize exposure, especially in saltwater.
The Mini Jacs come with a lifetime warranty.
|
|
Extreme series Jack Plates from Bob's Machine Shop are made to handle 350HP engines including V8's. Also great for offshore and race applications.
Allows access to shallow water, increases boat performance and increases fuel economy.
|
|
| ... products without information |
| |
EXTURN 300
external bow / stern thruster 3,0 kW, 24V
recommended boat size : 12 - 15 m (39 - 49 ft.)
|
|
EXTURN 230
external bow / stern thruster 2,3 kW, 24V
recommended boat size : 10 - 13 m (33 - 43 ft.)
|
|
EXTURN 130
external bow / stern thruster 1,3 kW, 12V
recommended boat size : 7 - 9 m (23 - 30 ft.)
|
|
EXTURN 180
external bow / stern thruster 1,8 kW, 12V
recommended boat size : 8 - 11 m (26 - 36 ft.)
|
|
EXTURN 400
external Duplex bow / stern thruster 4,0 kW, 12V
recommended boat size: 14 - 18 m (46 - 59 ft.)
EXTURN 600
external Duplex bow / stern thruster 6,0 kW, 24V
recommended boat size: 17 - 20 m (56 - 66 ft.)
|
|
|
|
see the results for the following category : 
