|
|
|
|
|
|
|
Finally, a high quality surface mount underwater boat light that does not require any compromises. The 12 LED On-Hull SeaLite® was created for boat owners that want to dramatically illuminate the water behind their boat, without installing a fitting through the transom. Engineered to be extremely rugged and reliable, this unit provides incredible light output in a compact, cost effective package. All of the electronics are integrated into the watertight housing, requiring only a small ½” hole through the transom for the power cable. Thermal compensation circuitry automatically regulates the temperature of the LEDs, allowing them to operate in water or air. The 12 LED On-Hull SeaLite® has special circuitry that allows it to double as a fish attracting strobe light with the flick of a switch and also includes an exclusive dimming feature so you can set the perfect mood. With an ultra long life, the 12 LED On-Hull SeaLite® requires no bulb maintenance!
The 12 LED On-Hull SeaLite® provides the peace of mind in knowing that it was designed by a company with over 25 years experience manufacturing underwater lights for deep diving submersibles, offshore oil and commercial divers.
|
|
|
|
|
|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED.
|
|
|
|
|
|
|
The new A12 Pro from OceanLED raises the bar yet again for all underwater lighting on the market. The original Amphibian range, (A3, A6 and A12) were designed with the specific purpose of running in and out of water, however with the singular purpose of being used underwater the power can be substantially turned up as the water cooling is consistent. In doing this the A12 becomes almost 75% brighter than a standard A12 which means it will out perform any competing LED underwater light on the market but more importantly rival any 50 watt Xenon bulb style underwater light.
Issued with an exclusive Gun-Metal colored insert the A12 still holds all the normal characteristics of the standard A12 such as thermal protection, Tritonium lens protection, 40,000 hour life and with only a slight increase in power draw. Powered on 12vDC the A12 Pro uses only 1.8 amps and on 24vDC a mere 0.9 amps, which when compared to a xenon bulb at over an 8 amp current draw, the advantages are clear.
Available in Blue, White and Green the A12 Pro is set to re-establish another industry bench mark.
|
|
Seablaze2 Underwater light leverages the ease of installation, high intensity and extreme durability of the original SeaBlaze, but offers 15% greater output and an even more attractive appearance. All control circuitry is contained within the fixture, so no external drive modules are needed. The luminaire requires only a small through-transom wire hole, so installation is fast and easy. Available in ultra-bright white or blue output. 10 to 30VDC, draws 950mA @ 12V, 475mA @ 24VDC.
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
SeaBlaze3 (dual color) Underwater LED Light
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
Model S 1206: (Bronze) spotlight strong narrow beam
Will penetrate the water up to * 100 feet giving
a crisp detailed view of submarine life.
6 LED – 18 watt, 45 degrees beam, draw only
1.5 Amp at 12 volts, 750 Lumens at 9000 Kelvin.
Diameter 4 ½ (114 m/m) thickness 1” (25.4 m/m)
This model is supplied with external power regulator.
(12V/24V)
|
|
This underwater light provides you the power of 6 LED
with just a little pierce in the hull for cable.
Easy to install.
Made in solid aluminium with a hight resistence front lens.
Low power consumption (30A/h at 24 V) and excellent light output.
We are looking for distributors / dealers for free Zones.
|
|
Model S 800: (Bronze) Powerful 12 LED flood wide angle
will illuminate up to * 50 feet.
12 LED – 16 watt, 90 degree beam angle.
Draw 1.3 Amp at 12 volts, 450 Lumens at 8400 Kelvin.
Diameter 3 ½ (88 m/m) thickness 11/16 (18 m/m)
The S 800 is supplied with external power regulator
|
|
The Trim Tab Light, which has proved to be a popular aftermarket product, is built out of thermal polymer, which means it's completely corrosion-free. Designed to mount on top of your trim tabs, it is ideal for those people who don't want to drill a hole in their boat, or for small trailerable boats. The Trim Tab Light can also be mounted on an L Bracket for boats that don't have trim tabs.
Available in Ultra Blue, Ultra Green and Brilliant White, this product is recommended for boats up to 30 feet.
|
|
- Housing made from high Tec polymer
- Unique curved design
- Low DC power consumption.
- Draws less than 1.3 amps @ 12 volts DC
- Low heat emission
- Designed for in water applications
- 6 x long life high output LED’s
- No bonding required
- No corrosion (no metal under water)
- Pivot bracket for easy cleaning
- 5 metre (16.2 ft) tined underwater cable
- Available in Ultra Blue, Ultra Green and Brilliant white
- Fibre glass mounting post
- I-njection moulded class reinforced bracket
- S/S mounting pins
- 2 year warranty
- Australian designed and manufactured
|
|
Model S 1515: (Bronze) Powerful 15 LED flood angle will illuminate up to * 100 feet.
15 LED – 36 watt, 90 degree beam angle.
Draw 3 Amp at 12 volts, 1610 Lumens at 8400 Kelvin.
Diameter 5 3/4 (146 MM) thickness 11/16 (27 MM)
The S 1515 is supplied with external power regulator
|
|
Model S 600: (Stainless Steel) flood wide angle illuminates up to * 30 feet around the transom area.
6 LED – 12 watt will draw only 1 Amp at 12 volts.
Large 100 degrees angle, 350 Lumens at 7200 Kelvin.
Diameter 3 1/8 (80 m/m) thickness 9/16 (15 m/m)
|
|
SCOUT OF HULL 6 LED 1w RED, VARI (angle 60°)
As an indication, a traditional halogenous bulb of 50-55 W replaces
6 LED of power
Scout of Hull with integrated driver
Detailed description:
Diameter: 90 mm
Thickness: 10 mm
Tension: 10 to 30 V AC OR cd. (system of regulation integrated)
Consumption: 6 W
Lighting: RED
Reference: 04HULL 6VARI RED
|
|
FishGLOW Underwater LED Lights for Boats
FishGLOW lights utilize the latest state of the art, high output, 12-volt, Light Emitting Diodes (LED's) as their source. The emerging LED technology allows for lower power consumption, improved reliability and increased longevity over conventional lighting. FishGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The curcuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount FishGLOW lights on the transom, at least 6-8 inches below the water line. Then pass the included 12' marine grade power cable from each light, through a small opening above the hull's water line or a suitable existing opening in the transom. FishGLOW lights connect to the included 20' power supply cable with a simple-to-use, color coded quick connect, which plug together in only one way.
|
|
Stainless Steel Chain, DIN 5685 Standard, Material AISI304 & AISI316
Material: Stainless Steel(inox)AISI304 or AISI316 A2 / A4
Packing: Cartons or Gunny bags.
Finished: polished with Bright
Standard: European standard DIN5685A
3MM
4MM
5MM
6MM
7MM
8MM
9MM
10MM
13MM
|
|
No more chafed ropes on Mooringbuoys
- Easy handling
- Pass your mooringline through the ring, cross the lines and attach it to your cleats
- Perfect for use with our Mooring buoy catch hook
- High quality stainless steel chain
- Best quality ropes (Liros)
- 3 different versions for boats up to 10 m / 15 m / 20 m
|
|
|
Coloured plastic inserts for fitting into chain links, sold in kits suitable for marking 25 cm of sized chains.
|
|
|
Manufactured from 316 and 304 stainless steel, these proof tested chains offer high resistance to corrosion in salt water and marine environments and effective rust resistance in acid and alkaline solutions. Maintenance free and long life. Available in regular and short link formations and Grade 40 short link in various sizes.
|
|
|
Anchorlift chaings are top quality DIN 766 and USA standar calibrated chain for use on Anchorlift anchor windlasses. For the windlass to run smoothly, the chain needs to match the gypsy. Anchorlift chains are adjusted and calibrated according to the DIN 766 and USA standard. Available in hot dipped galvanized steel and stainless steel (most sizes). The chain stowes itself in the windlass gypsy and the weight causes it to drop through the chain pipe. Chain is favoured by many cruising boaters, it is compact in size, highly abrasion - resistant and liea firmly on the bottom in most conditions.
|
|
Slim Splice Quick System
Rope and chain
Calibrated hot dipped galvanised chain
First choice 3-strand polyester rope
Low stretch & High Strenght
An anchor-rode is the connection system between anchor and the boat and its
sturdiness during mooring is undoubtedly essential.
The critical point of the rope and chain combination is the joint, or technically speaking, the splice.
In Quick%u2019s Slim Splice, the splice is much slimmer and more tapered, preventing the jamming which often occurs on the gypsy, during changeover from rope to chain.
Quick%u2019s Slim Splice consists of a calibrated chain and a top quality 3-strand polyester rope, to guarantee optimum strength and life.
|
|
16-plaited, 10 mm, 30 m length anchor line with lead white with blue flecks
Anchor line with lead weight built into the last 10 meters, can be used without chain, especially easy to handle, very easy to stow, stainless steel thimble spliced and whipped into every 30 or 40 m length.
100% Polyester, chafe and UV-resistant, white with blue colour coding and blue/gold mark yarn. Available in ready-made blue LIROS kitbag.
Info
- usable without chain
- especially easy to handle
- very easy to stow
- available in an attractive kitbag
|
|
tressage 16 fuseaux, 12 mm, longueur 30 m, avec cosse plastique coupé à chaud blanc uni
Ligne de mouillage plombée sur toute la longueur pour un positionnement le plus horizontal possible par rapport à l'ancre. Très facile à mettre en oeuvre, à manipuler et à stocker. Disponible en longueurs de 30 ou 40 mètres. Terminaison avec cosse plastique coupé à chaud.
Les plus
- évite l'usage d'une chaîne
- très agréable à manipuler
- très facile à stocker
- également disponible dans un beau LIROS-Sac marin
- Confection spéciale sur demande, Longueur, couleur et diamètre au choix
|
|
Muir dock and anchor line is made from the highest grade marine nylon to ensure every line is easy to handle, flexible, extremely strong and abrasion resistant.
This premium white 3-strand nylon is coated with a unique water repellant marine coating for abrasion and hardening resitance, plus greater wet strength.
Popular for vessels of all sizes, this docking and anchor line is available in a variety of diameters from 5mm (3/16") to 28mm (1/1/8"). Other line types and sizes available upon request.
|
|
|
|
see the results for the following category : 
