|
|
|
|
|
|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED.
|
|
This underwater light provides you the power of 6 LED
with just a little pierce in the hull for cable.
Easy to install.
Made in solid aluminium with a hight resistence front lens.
Low power consumption (30A/h at 24 V) and excellent light output.
We are looking for distributors / dealers for free Zones.
|
|
|
|
|
|
|
Finally, a high quality surface mount underwater boat light that does not require any compromises. The 12 LED On-Hull SeaLite® was created for boat owners that want to dramatically illuminate the water behind their boat, without installing a fitting through the transom. Engineered to be extremely rugged and reliable, this unit provides incredible light output in a compact, cost effective package. All of the electronics are integrated into the watertight housing, requiring only a small ½” hole through the transom for the power cable. Thermal compensation circuitry automatically regulates the temperature of the LEDs, allowing them to operate in water or air. The 12 LED On-Hull SeaLite® has special circuitry that allows it to double as a fish attracting strobe light with the flick of a switch and also includes an exclusive dimming feature so you can set the perfect mood. With an ultra long life, the 12 LED On-Hull SeaLite® requires no bulb maintenance!
The 12 LED On-Hull SeaLite® provides the peace of mind in knowing that it was designed by a company with over 25 years experience manufacturing underwater lights for deep diving submersibles, offshore oil and commercial divers.
|
|
Seablaze2 Underwater light leverages the ease of installation, high intensity and extreme durability of the original SeaBlaze, but offers 15% greater output and an even more attractive appearance. All control circuitry is contained within the fixture, so no external drive modules are needed. The luminaire requires only a small through-transom wire hole, so installation is fast and easy. Available in ultra-bright white or blue output. 10 to 30VDC, draws 950mA @ 12V, 475mA @ 24VDC.
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
SeaBlaze3 (dual color) Underwater LED Light
Lumitec again raises the bar in terms of features, performance, and price in underwater lighting. Boasting light output equal to that of competitors costing 3 to 5 times more, SeaBlaze3 is available in 4 output options, including 2 color. Surface mount for fast easy installation.
|
|
Model S 1206: (Bronze) spotlight strong narrow beam
Will penetrate the water up to * 100 feet giving
a crisp detailed view of submarine life.
6 LED – 18 watt, 45 degrees beam, draw only
1.5 Amp at 12 volts, 750 Lumens at 9000 Kelvin.
Diameter 4 ½ (114 m/m) thickness 1” (25.4 m/m)
This model is supplied with external power regulator.
(12V/24V)
|
|
Model S 800: (Bronze) Powerful 12 LED flood wide angle
will illuminate up to * 50 feet.
12 LED – 16 watt, 90 degree beam angle.
Draw 1.3 Amp at 12 volts, 450 Lumens at 8400 Kelvin.
Diameter 3 ½ (88 m/m) thickness 11/16 (18 m/m)
The S 800 is supplied with external power regulator
|
|
Model S 600: (Stainless Steel) flood wide angle illuminates up to * 30 feet around the transom area.
6 LED – 12 watt will draw only 1 Amp at 12 volts.
Large 100 degrees angle, 350 Lumens at 7200 Kelvin.
Diameter 3 1/8 (80 m/m) thickness 9/16 (15 m/m)
|
|
Model S 1515: (Bronze) Powerful 15 LED flood angle will illuminate up to * 100 feet.
15 LED – 36 watt, 90 degree beam angle.
Draw 3 Amp at 12 volts, 1610 Lumens at 8400 Kelvin.
Diameter 5 3/4 (146 MM) thickness 11/16 (27 MM)
The S 1515 is supplied with external power regulator
|
|
SCOUT OF HULL 6 LED 1w RED, VARI (angle 60°)
As an indication, a traditional halogenous bulb of 50-55 W replaces
6 LED of power
Scout of Hull with integrated driver
Detailed description:
Diameter: 90 mm
Thickness: 10 mm
Tension: 10 to 30 V AC OR cd. (system of regulation integrated)
Consumption: 6 W
Lighting: RED
Reference: 04HULL 6VARI RED
|
|
FishGLOW Underwater LED Lights for Boats
FishGLOW lights utilize the latest state of the art, high output, 12-volt, Light Emitting Diodes (LED's) as their source. The emerging LED technology allows for lower power consumption, improved reliability and increased longevity over conventional lighting. FishGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The curcuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount FishGLOW lights on the transom, at least 6-8 inches below the water line. Then pass the included 12' marine grade power cable from each light, through a small opening above the hull's water line or a suitable existing opening in the transom. FishGLOW lights connect to the included 20' power supply cable with a simple-to-use, color coded quick connect, which plug together in only one way.
|
|
|
Use the LED flashlight to show the sea creatures in the night, floodlight to show off the outline of the marine, the illuminative light as new fashion illumination.Water-proof,stainless steel cover,safe,high brightness and as long as 50000 working hours.
|
|
|
Use the LED flashlight to show the sea creatures in the night, floodlight to show off the outline of the marine, the illuminative light as new fashion illumination.Water-proof,stainless steel cover,safe,high brightness and as long as 50000 working hours.
|
|
The Flush Mount from OceanLED has an exceptionally low profile giving it virtually unlimited Hull Mounting options. This light can be retro-fitted into most existing underwater lighting hole cut outs, offering immediate benefits of no Startup power surge, low heat, minimal maintenance and improved light output.
Suitable for Fiberglass, GRP and wooden hulls and now also for use on aluminium/steel hulls using the delrin sleeve.
Low profile bezel offering almost unlimited mounting possibilities.
Lloyds Type Approved, RINA, ABS Type Approved, USCG Ignition Protected and ABYC H-27 Side Load approved.
All lights utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Available in 1520, 2010 & 3010 Series with Super White LEDs, Super Blue LEDs and the Super Green LEDs.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
