|
|
UNI-SOLAR flexible modules can improve the quality of your spare time. Noiseless, walking-on, durable and weather-resistant, the modules convert sunlight into power using an advanced Triple Junction thin film photovoltaic technology.
Available in three models, in 5, 11 and 32 Watt power, the Uni-SOLAR battery chargers save your money, by reducing battery maintenance and by extending battery life. The uniquely functional design makes them perfectly suited to meet battery charging needs for boating, rv and automotive applications: an easy and environment-compatible way to solve your energy problems on board. When the boat is left unattended, the solar panel maintains the battery in top shape, avoiding the occasional inconvenience of a dead battery.
|
|
|
UNI-SOLAR® photovoltaic laminates (PVL) are flexible and lightweight laminates made exceptionally durable by encapsulation in UV stabilized polymers. The polymer encapsulation is partially constructed of durable ETFE, (example, Tefzel®) a high-light-transmissive polymer.
|
|
Kyocera solar modules are a reliable, virtually maintenance-free power supply designed to convert sunlight into electricity at the highest possible efficiency. Kyocera began researching photovoltaics in 1975 and has installed thousands of systems throughout the world since 1978. These systems are ideal for charging storage batteries to power remote homes, recreational vehicles, boats, telecommunications systems and other consumer and commercial applications.
|
|
|
Our framed modules are mounted on permanent; fixed position module racks that can be adjusted for optimum tilt, wind resistance and exposure to sunlight. These glass-free, lightweight, vandal resistant modules can be used in a wide variety of applications from fence charging to telecommunications.
|
|
Typical applications: Residential and commercial
Key features: High power dark back, aesthetic, all purpose, rack mount
Cell technology: Multicrystalline
Dimensions: 1680mm x 837mm x 50mm
Weight: 37.84 lbs
Glass type: Anti-reflective coating
Frame type: Universal, dark bronze anodized
|
|
|
Sometimes you just need serious energy to keep your RV or boat going and going. Maybe you don't want an uppity, high-maintenance mechanical generator spewing out diesel or propane fumes. (Cough, cough). Fresh air, man. That's why you're out here doing yoga in the middle of who-knows-where, getting off on that that heavenly air.
|
|
| ... products without information |
| |
thickness excluded Veneer or Hpl,
Final thickness included Veneer + 1mm. (+/-)
Final thickness included Hpl + 1,6mm. (+/-)
Moistre resistant chipboard which can be used in a moistre surrounding.
Extra strong, stable and perfect for screws.
Minimal influence from humidity like swelling and transformation.
Easy workable, multifunctional standard board.
Weight ca. 700 kg/m3.
|
|
|
Teak Marine fabricates beautiful interior floors for all sizes and styles of yachts. Our unique pre-fabricated system enables Teak Marine clients to choose from a variety of exotic woods to match or build a new cabin sole. The layout for the interior can either be straight or sprung planking. Seams can be made from beautiful woods such as holly, walnut or maple.
|
|
| ... products without information |
| |
| ... products without information |
| |
AL-8000 DISPLAY CONTROLLER: Is the master display unit.
Visual & audible alarm for any fault condition.
4 x overrides (engine running overrides for engine alarms).
8 inputs have programmable delays (5 seconds to 10 minutes).
All alarms tone programmable (with tone or without tone or repeating tone).
Alarms are name programmable e.g. (High Bilge) (Engine Room Fire) (Oil Pressure) (Water in Fuel).
|
|
AHD 903-15 is a microprocessor controlled device that is mainly used for decentralized data
registration. Due to the addressable systems it is possible to connect principally any amount of
locally separated data stations (over a bus with 4 wires, incl. power supply) and to query them
via the display AHD 524. Due to a variety of software solutions, e.g. the following problems can
be solved:
- general analog and binary data collection and alarm activation
- exhaust gas average value control for diesel engines
- tank content measurement of arbitrarily shaped tanks
- earthing control e.g. of electric engines
|
|
The Smartswitch BC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight bilge areas. When any bilge area runs for more than one minute an alarm sounds. If the high float detects water the alarm will sound. You can controll the pump by switch the system into manual mode. The system is happy with pumps up to 40 AMPS. Want to know how many times the bilge area pupm was activated? Easy with the BC-8000 from Smartswitch
The system consists of the BC-8000 display controller (as seen above) up to eight BC-100 or BC-100/P controllers and one (optional) RB-800 repeater displays. The system communicates via a 2-wire network cable with a maximum cable length of 1000 meters
|
|
The BILGEWATCH 8 is a Microprocessor based, Panel Mount Instrument that will Monitor and Record the Activity of up to EIGHT Bilge Pumps.
"Four out of five boats that sink, do so at their moorings!..."
Faulty seals, corrosion, cracked or broken fittings and perished hoses are often to blame. Increased bilge pump activity is a sure sign of a developing fault, but automatic bilge pumps can hide the problem, operating while the boat is unattended. By monitoring and recording the activity of all the boats bilge pumps, the BILGEWATCH 8 can provide advance warning of problems, before they become emergencies.
How to order the BilgeWatch 8...
BW8 Kit (£79.95)
Shipping cost will be added, tax is not applicable.
|
|
On high performance systems, fender panels are just as important as the rubber units. That's why every Fentek panel is purpose designed using structural analysis prograsms and 3D CAD modelling for optimum strength.
Fender panels distribute reaction forces to provide low hull pressures and cope with large tidal variations. They can also be designed to resist line loads from belted ships, or even point loads in special cases. Optional lead-in bevels reduce the snagging risk, whilst brackets (where required) provide highly secure connection points for chains.
Features and options
* Closed box steel structure
* Internal structural members
* Blind boss fender connections
* Pressure tested for watertightness
* C5M modified epoxy paint
* Polyurethane topcoat (RAL5005 blue)
* Studs for UHMW-PE face pads
* Chain brackets
* Lifting points
* Lead-in bevels and chamfers
|
|
Fentek FQ1000 ultra high molecular weight polyethylene (UHMW-PE) is the first choice material for facing steel fender panels and other heavy duty applications. It combines very low friction with excellent impact strength and a wear resistane much greater than steel.
Most popular is FQ1000DS – a 'double-sintered' and work-hardened material for extra durability, which is normally supplied in black. FQ1000V 'virgin' grade comes in yellow, white, grey, blue, green or red.
FQ1000 UHMW-PE materials are compounded to resist ozone and UV radiation. They do not degrade or rot and are easily recycled at the end of their useful service life.
Features
* Very low friction coefficient
* Excellent abrasion resistance
* UV and ozone resistant
* Does not rot, split or crack
* 100% recyclable
|
|
| ... products without information |
| |
| ... products without information |
| |
| ... products without information |
| |
|
|
see the results for the following category : 
