|
|
When building a Raymarine C-Series or E-Series Radar System you have your choice of either Open Array of closed Radome scanner. Both Radomes and Open Arrays are fully compatible with every every multifunction display and deliver unparalleled performance. To help you decide which antenna is right for you we have listed the advantages of each scanner type below.
|
|
|
|
|
|
|
The use of new SD Radar systems (Super Definition) makes your Colour Plotter an excellent High Definition Radar Screen for navigating in any weather condition.
Five Antenna versions are available, which allow a wide choice based on preferred navigation and type of vessel, both sailboat and motorboat.
All informations provided by the system are perfectly visible on the LCD Display. The contours of the Radar image will surprise you with their clear brightness.
The Lorenz SD Radar system can be interfaced with cartographic plotters of the World Map 11 and Starlight Dual series.
Some of the most important features like EBL, VRM, Rings, Mark positioning, rotation speed control, sectorial obstacle alarm with choice of angle and selected distance, make the Radar system easy and intuitive to use.
The great innovation is brought by the CHART OVERLAY system that allows to place the cartographic image over the image actually read by the Radar, as seen from the bow of the vessel.
This feature is particularly advisable for night navigation and with poor visibility. The radar system makes navigation more secure in difficult passages or when entering a harbour, than when depending only on the predefined nautical chart.
The SD Radar is supplied with an Anticollision System that automatically gives an optical and acoustic alarm signal that calculates on forehand if on your route you will meet other obstacles.
|
|
|
Offering outstanding performance features such as Interference Rejection (up to 3 levels), FTC (Rain Clutter Rejection), STC (Sea Clutter Rejection - up to 256 levels), Gain Adjustment (up to 256 levels), Automatic Tuning, and 7 levels of Trail Settings.
|
|
|
Today's tactical environment demands an I- Band radar that is able to provide superb performance in clutter for navigation safety, the detection of the small fast attack craft (FIAC) threat and the tracking of small helicopter targets. SharpEye meets these requirements and has been developed as the world's first new technology I-Band navigation and surveillance radar.
|
|
|
Kelvin Hughes' F- Band SharpEye radar is able to provide superb performance in clutter for navigation safety, the detection of the small fast attack craft (FIAC) threat and the tracking of small helicopter targets. SharpEye meets these requirements and has been developed as the world's first new technology I-Band navigation and surveillance radar. Incorporating the latest in solid state, pulse doppler and signal processing technologies, SharpEye offers performance previously only possible in extremely expensive military or civil aviation surveillance radar. Combining this with the reliability of a completely solid-state solution gives SharpEye the edge in this demanding market.
|
|
The GMR 406 open array radar (pedestal sold separately; click on accessories tab to view pedestal) allows you to scan more of what's out there while you're on the water. Whether ships, shores, birds or weather, you'll see it sooner with the powerful 6-foot GMR 406 and its smaller counterpart, the GMR 404.
The GMR 406 is a 6-foot open array scanner with 1.1° beamwidth and a range of 72 nautical miles. With this intense beamwidth and 4 kilowatts of power, the 406 offers outstanding clarity, precision and target definition. You can also use the 406 to avoid traffic on the water with MARPA target tracking.
|
|
The GMR 404 open array radar (pedestal sold separately; click on accessories tab to view pedestal) allows you to scan more of what's out there while you're on the water. Whether ships, shores, birds or weather, you'll see it sooner with the powerful 4-foot GMR 404 and its larger counterpart, the GMR 406.
The GMR 404 is a 4-foot open array scanner with 1.8° beamwidth and a range of 72 nautical miles. With this beamwidth and 4 kilowatts of power, the 404 offers outstanding clarity, precision and target definition. You can also use the 404 to avoid traffic on the water with MARPA target tracking.
|
|
|
The new SI-TEX MDS Radar Sensor Series connect to your SI-TEX ColorMax Wide, ColorMax 11, ColorMax 15, Explorer Plus, or Trawl Plot 12 Charting Systems to add affordable full-featured Radar capabilities.
|
|
Based on our unique ellipse extrusion, Scanstrut's Aluminium PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Available in a forward leaning profile for radome installations and an aft leaning profile for open-array installations.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
Offering a single "monocoque" structure for outstanding strength and surface finish, Scanstrut's Composite PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
NEW design for 350mm version - even greater strength to suit all new generation radomes.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
Custom Designs
Scanstrut is a recognised and respected supplier to several of the world’s best sail and power boat builders.
From a one-off mounting to a custom product range for a new boat model, Scanstrut will provide a complete design and build service for bespoke solutions.
Our experienced designers listen to your needs and develop the right solution to meet your exact installation requirements.
Scanstrut OEM projects have successfully:
- Reduced time & build costs
- Simplified stock holding
- Introduced technically superior products
To view a list of our current OEM products, please visit our website.
|
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas
|
|
Scanstrut's Stainless PowerTower® is designed to elevate your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Created using a highly polished stainless steel, this makes a great looking installation on any boat.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks.
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.
Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.
NEW mounting foot design for 2008 - even easier installation.
Features
- Easy and quick to install with all fastenings supplied
- Attached to mast by four swivel feet matching the profile of any mast
- 12 point fixing using highest quality Monel rivets for a secure installation
- Nylon washers for all fastenings to protect paint finish
- Waterproof cable grommet included to seal cable entry into mast
|
|
|
Seaview modular mast are available in 3 and 4" diameter aluminium tube. There are adapted for any kind of Radar, TV and Satcom antennas. They can have either a fix, ajustable or thru deck fitting. Accessories will complete the unit will lights, davit for HB engine....They are cut to the request lenght from 50 cm up to 5 Meter.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
C2SAT introduces a mini VSAT, C2SAT 1.2m Ku-4M, a low weight 4-axes military and commercial high performance Stabilised Antenna Systems for mobile broadband communication.
Same excellent performance
Smaller meter and sub meter reflectors in all frequency bands can be mounted into the same stabilised robot. C2SATs 4-axes mini VSAT model, C2SAT 1.2m Ku-4M, features a less than 100 kg stabilisation robot boasting of the same excellent performance as full size C2SAT 1.2m Ku version.
- All frequency bands
- Submeter to 1.2m disches in one rig
- No critical static balancing of Axes
- Zenith Passage without x-pole losses
- Larger coverage at sea at same dish size
|
|
C2SAT introduces, C2SAT 2.4m C, a 4-axes military and commercial high performance Stabilised Antenna Systems for mobile broadband communication.
C2SATs multiband VSAT features optional reflector sizes up to 2.4m all frequency bands e.g. C-band, X-band fitting the same mechanical rig.
- No static balancing of axes
- Zenith Passage without X-pole losses
- Larger coverage at sea
- LP, RHCP and LHCP all-in-one
|
|
|
|
|
|
|
C2SAT introduces, C2SAT 1.2m Ku, a 4-axes military and commercial high performance Stabilised Antenna System enabling vessels in motion on-line two-way satellite broadband communication. C2SAT 1.2m Ku Stabilised Antenna is the standard model.
Better accuracy
The system achieves superbly high tracking accuracy (only a loss of 0,1 dB compared with normally 3 dB), comparable to a fixed antenna. C2SAT prefers to use the more accurate tracking accuracy to measure performance instead of commonly used pointing accuracy, mainly because it includes both the losses due to pointing- and the polarisation misalignments. The high tracking accuracy is a result of the system's gradient tracking method, a predetermination tracking parameter and the 4 axis design, where the fourth axis refers to the cross-level elevation.
Higher accuracy results in:
- Improved availability
- More efficient use of shared lines and network bandwidth
- Lower transmission power
- Wider operational area in the satellite footprint
It also permits equally perfect communication while operating under severe and harsh conditions.
|
|
|
Designed for versatility, this rugged and reliable antenna system comes in four models to meet your vessel’s requirements: the 60cm Ku/DVBS2, the 80 cm Ku Broad Band, the 90 cm Ku Broad Band and the 120 cm Ku Broad Band.
|
|
- Internal WAAS receiver
(DGPS 212W)
The DGPS212W includes a WAAS receiver. By Using WAAS you can achieve precise position.
- Internal Differential Beacon Receiver
The DGPS 212 includes a Beacon Receiver and a GPS Receiver.
By using DGPS you can achieve true DGPS accuracy.
- 12-Channel Parallel for Receiving 12 Satellites Simultaneously
The DGPA 212 is designed to simultaneously receive from 12 orbiting satellites, ensuring the most accurate positioning.
- Quick Position Fixing
Typically 45 seconds for first position fixing without GPS almanac data.
- Conversion to NMEA183 Output
Since the NMEA0183 output data is changeable between version 1.5 and version 2.1 you can connect the DGPS 212 to various Marine Electronics Equipment such as Marine Radars, Fishfinders, Plotters, or others.
- PPS Signal Output
The DGPS 212 outputs a pulse per second which coincides with UTC second precisely. It can be used as a precise clock.
|
|
- Internal SBAS receiver
The GPS124 includes a SBAS (WAAS/EGNOS/MSAS) receiver.
By using SBAS you can achieve precise position.
- RAIM function
The accuracy of position fixes is self-tested by the GPS124. (RAIM function)
This function assures higher reliability to the position fix than conventional method.
- 12-Channel Parallel for Receiving 12 Satellites Simultaneously
The GPS 124 is designed to simultaneously receive signals from 12 orbiting satellites, ensuring the most accurate positioning.
- IEC61162-1, NMEA0183 Output
Since the output data is changeable between IEC61162-1 (NMEA0183 version 2.3), NMEA version 1.5 and 2.1, you can connect the GPS124 to various Marine Electronics Equipment such as Marine Radars, Fishfinders, Plotters, or others.
|
|
|
|