|
|
Unlike other torches in the market that have a yellowish beam, the MityLite 1900 uses a hi-intensity Xenon lamp that produces a powerful, bright beam. Use this compact torch to cut through thick smoke, fog, and dust. It is submersible to 150 meters and comes with a twist on/off lens shroud. The 1900 is ideal for any situation. Powered by 2 AAA alkaline cells. Certified to ATEX safe for use in hazardous Zone 1 (Category 2) locations.
|
|
|
This powerful torch was designed with one big goal: SAFETY. The SabreLite 2000 carries more approvals than any other torch on the market today making it extremely safe. The SabreLite is o-ring sealed with a twist on/off lens shroud and comes with a polarity battery guard tray that safeguards against dangerous "outgassing" of hydrogen from an accidentally reversed cell. It is powered by 3 C alkaline cells, submersible, and has an ABS resin body which resists chemicals, corrosion, and extreme temperatures. Unlike ordinary torches with yellowish beams, the SabreLite's incredibly bright Xenon lamp produces a powerful collimated white beam of light. Peli's SabreLite is the leader in quality and performance. Certified to ATEX Zone 2 (Category 3).
|
|
This one is built to last. The unbreakable ABS body resists chemicals, water and corrosion. The polycarbonate lens and focused Xenon lamp module produce a tight white beam that penetrates smoke and fog. The PeliLite 1800 is submersible to 150 meters, thanks to the o-ring seal and twist on/off lens shroud that eliminates leaky switches. It is powered by 2 C akaline cells. Certified to ATEX Zone 2 (Category 3).
|
|
|
Popular with firefighters and adventure seekers. The unique easy slide thumb switch on the StealthLite 2400 is easy to operate, even with gloves. The tough resin body is corrosion proof and resistant to extreme temperatures. The Xenon lamp is powered by 4 AA alkaline cells (included) for a bright beam that penetrates thick smoke, fog, and dust. Attach the StealthLite to one of our optional helmet light holder clips and you have a hands-free light for work or play. Certified to ATEX Zone 2 (Category 3). Submersible to 150 meters.
|
|
|
The Leatherman Serac S2 LED flashlight is all business. Sure it looks pretty innocuous hanging from your keychain, but don't be fooled. With two settings pumping out 35 lumens on only one AAA battery, and an aircraft-grade aluminum body with stainless steel bezel, there's nothing little about it. And the S2 has a textured reflector and glass lens for a completely smooth, article-free light pattern.
|
|
|
HT-291 LED Aluminum Mini Torch - Single white LED with magnifier for brilliant defined beam. Over 7 hour burn time. Aircraft aluminum housing. Ergonomic flush mount rubber switch. O-ring sealed for water resistance. One AA battery included. Clam pack.
|
|
|
HT-1000 LED Aluminum Hand Torch - 1-Watt Ultra Bright LED – 10X brighter than standard LED. Up to 50 hour burn time. Aircraft aluminum housing. Ergonomic flush mount rubber switch. O-ring sealed for water resistance. Wrist strap, case and (3) AAA batteries included. Clam pack.
|
|
Scottlamp Waterproof LED Utility Light
Ideal Lighting for Camping Trips and working in the wet
The waterproof LED inspection lamp is ideal for wet environments.
This is a waterproof LED light providing a bright light with low power consumption. Designed to work in wet conditions, the Scottlamp LED Utility Light (SLUL) is ideal for a variety of commercial and leisure applications.
The SLUL is a waterproof, robust and powerful, low voltage, bright light incorporating the latest multichip white LEDs (Light Emitting Diodes). While only drawing 0.2 amp, means the SLUL is ideally powered from car or boat batteries. The SLUL is an ideal emergency back up inspection light. It uses little power and will last a lot longer than conventional lights: essential when power is at a premium for more vital applications.
|
|
|
This lightweight and compact torch floats with the beam upright. Complete with an Xenon bulb and wrist lanyard.
|
|
4 LEDs of the latest generation and 8 hours of autonomy with a brilliant white, penetrating light.
The Lumen Led uses 4 LEDs of the last generation, low energy consumption LEDs with high lighting efficiency.
The LEDs are super powered for a colour temperature of over 6.000°K, and have a working life of around 50.000 hours.
It is fitted with an electronic circuit that ensures the best power supply and protects the LEDs.
The power supply is provided by 6 C size, torch batteries providing more than 8 hours autonomy.
The underwater light has a power that is comparable with more than 50 Watts.
The metal lighting head, with its 4 LEDs and electronic circuit, is completely watertight and provides added protection against accidental
water infiltration.
|
|
|
We've taken our popular 2600 and outfitted it with our Recoil LED module. What you get is a hands-free light that's extremely powerful, durable, and efficient. The HeadsUP Lite 2680 uses a 1-Watt LED that's aimed backwards into the reflector. 100% of the light is captured and aimed forward as a tight collimated beam that's as bright as an incandescent. The body is made of tough ABS resin that's corrosion proof, submersible and virtually indestructible. It is powered by 4 AA alkaline cells (included) and comes with a rubber strap for hard hat use and an adjustable cloth strap for bare head. Certified to ATEX Zone 2 (Category 3).
|
|
M4 Marine, adjustable reflector, red or white light
The M4 Marine is a compact, lightweight and high performing LED-headlamp using the same design concept that has proved such a success on the other M-models.
Due to its compact design, the M4 Marine is the perfect choice when weight and space is crucial. Also ideal when high performance is required at sea.
The new M4 Marine has a rugged, splash-proof body housing three high-power LEDs (2 white and 1 red). This LED technology provides the performance necessary for close range work (up to 20 meters), but with extremely low power consumption. Up to 150 hours battery life and weights only 80g with batteries.
|
|
| ... products without information |
| |
Light Dimmer
Micro controlled system
Featured shortcircuit protection
Thermal protection
Radio Interference free
Led working status
Unlimited power expansion
Memory on Switch-off
|
|
The ANNAEVA push buttons type have been designed for the control of low voltage small loads such as relays, interfaces, dimmers, etc. via normally opened push buttons with momentary action.
The push buttons, depending on the model, have from 1 to 6 push buttons.
DOME TECHNOLOGY
FOR INTERIORS
VERY LOW RECESS
Protection grade IP 20
Material Stainless Steel
Spring Installation
|
|
CANTALUPI DIMMER CLL FOR LED LIGHTS
The CLL Dimmer is a driver for the light intensity control of not only L.E.D. downlights and CLL (Cantalupi L.E.D. Lighting) L.E.D. illuminating systems, but also of monochromatic L.E.D. strips and RGB systems.
The device manages 3 separate channels that can each supply up to a maximum of 6A.
Main power supply: 10-30 V DC
Stand-by absorption: 50mA
Inputs: 3
Output: 3
Input types: Push Buttons - Monitor touch screen- Serial BUS RS485
Max Load per Output: 6A
Protocols: MODBUS or DMX (on request)
Master Slave and Control management: 2 x RS485 Serial BUS ports
Installation: DIN Bar
Channels protection: 3 resettable fuses 6A with thermal protection
Power fuse: 20A blade fuse
Operating Temperature range: from 0° C to +40° C (from +32° F to + 104° F)
|
|
|
|
|
|
|
NERO is a capacitive touch switch button which relaces the standard switch and push buttons for the switching on/off function and for the control of audio/video devices but with a step ahead. Unlike the standard switch buttons, as you don't need to make holes for it, it can be used in the most unusual modes and places thus allowing to give to the boat an unique style. Its very small dimensions enable space saving and give full to the interior designers.
NERO can be set as switch or push button and is available in several models, from one up six switches, it can disappear behind whatever surface or can be provided with a frame of different colours, versions and materials. It is also being properly designed in order to fit perfectly inside plates and material of the main electric productors suppliers.
Among the new models very interesting are NERO DIMMER an electronic light control provided with dimmer device at a low voltage and NERO DIMMER LED the electronic dimmer at low consumption for power led.
|
|
Elby is the wireless push button battery and maintenance free.
It can be installed everywhere for several functions for the expansion of the lighting system, buzzer installation and others without masonry works and saving time.
|
|
The Smartswitch NavLight monitor (NV-8000)will monitor and control all the Navlights and alarm when there is a fsulty or blown light. Navlights can be put into 6 programmable groups, twilight sensor option, all lights are name programmable,
Also available is the (NV-2000) will monitor up to 32 lights.
|
|
|
|
|
|
|
Power production and climate control are among your boat's most critical components. Naturally, you will install the highest quality systems, to work seamlessly in concert.
High energy demand systems like air conditioning, stabilizers and bow thrusters are becoming more common on modern vessels. With multiple staterooms, power configurations and night-versus-day demands, properly loading your generator set can be challenging. Without proper load management, the generator set can run underloaded, leading to unnecessary maintenance issues.
To address these issues, the Technicold Linear Load Bank features variable outputs to manage electrical load on each individual 3 phase leg. This capability balances all phases in a widely variable load share solution. The ideal bank for a boat with multiple AC configurations, the TECHNICOLD Linear Load Bank is the only fresh water cooled, non-modular load bank commercially available.
By supplying a supplemental electric load to the generator, TECHNICOLD load banks ensure that the generator is always properly loaded. Engine activity is easily monitored with the Load Bank Controller, which tracks each leg of power from the ship's electrical panel. The digital controllers analyze the data and transmits commands to the load controls. If the vessel's power usage fluctuates, the controller uses pre-programmed parameters to stage up to three electric loads. It will even provide load shedding as needed.
Protect your boat's most important assets; insist on TECHNICOLD By Northern Lights.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
