|
|
|
The Leatherman Serac S2 LED flashlight is all business. Sure it looks pretty innocuous hanging from your keychain, but don't be fooled. With two settings pumping out 35 lumens on only one AAA battery, and an aircraft-grade aluminum body with stainless steel bezel, there's nothing little about it. And the S2 has a textured reflector and glass lens for a completely smooth, article-free light pattern.
|
|
|
HT-291 LED Aluminum Mini Torch - Single white LED with magnifier for brilliant defined beam. Over 7 hour burn time. Aircraft aluminum housing. Ergonomic flush mount rubber switch. O-ring sealed for water resistance. One AA battery included. Clam pack.
|
|
|
HT-1000 LED Aluminum Hand Torch - 1-Watt Ultra Bright LED – 10X brighter than standard LED. Up to 50 hour burn time. Aircraft aluminum housing. Ergonomic flush mount rubber switch. O-ring sealed for water resistance. Wrist strap, case and (3) AAA batteries included. Clam pack.
|
|
Scottlamp Waterproof LED Utility Light
Ideal Lighting for Camping Trips and working in the wet
The waterproof LED inspection lamp is ideal for wet environments.
This is a waterproof LED light providing a bright light with low power consumption. Designed to work in wet conditions, the Scottlamp LED Utility Light (SLUL) is ideal for a variety of commercial and leisure applications.
The SLUL is a waterproof, robust and powerful, low voltage, bright light incorporating the latest multichip white LEDs (Light Emitting Diodes). While only drawing 0.2 amp, means the SLUL is ideally powered from car or boat batteries. The SLUL is an ideal emergency back up inspection light. It uses little power and will last a lot longer than conventional lights: essential when power is at a premium for more vital applications.
|
|
4 LEDs of the latest generation and 8 hours of autonomy with a brilliant white, penetrating light.
The Lumen Led uses 4 LEDs of the last generation, low energy consumption LEDs with high lighting efficiency.
The LEDs are super powered for a colour temperature of over 6.000°K, and have a working life of around 50.000 hours.
It is fitted with an electronic circuit that ensures the best power supply and protects the LEDs.
The power supply is provided by 6 C size, torch batteries providing more than 8 hours autonomy.
The underwater light has a power that is comparable with more than 50 Watts.
The metal lighting head, with its 4 LEDs and electronic circuit, is completely watertight and provides added protection against accidental
water infiltration.
|
|
|
We've taken our popular 2600 and outfitted it with our Recoil LED module. What you get is a hands-free light that's extremely powerful, durable, and efficient. The HeadsUP Lite 2680 uses a 1-Watt LED that's aimed backwards into the reflector. 100% of the light is captured and aimed forward as a tight collimated beam that's as bright as an incandescent. The body is made of tough ABS resin that's corrosion proof, submersible and virtually indestructible. It is powered by 4 AA alkaline cells (included) and comes with a rubber strap for hard hat use and an adjustable cloth strap for bare head. Certified to ATEX Zone 2 (Category 3).
|
|
M4 Marine, adjustable reflector, red or white light
The M4 Marine is a compact, lightweight and high performing LED-headlamp using the same design concept that has proved such a success on the other M-models.
Due to its compact design, the M4 Marine is the perfect choice when weight and space is crucial. Also ideal when high performance is required at sea.
The new M4 Marine has a rugged, splash-proof body housing three high-power LEDs (2 white and 1 red). This LED technology provides the performance necessary for close range work (up to 20 meters), but with extremely low power consumption. Up to 150 hours battery life and weights only 80g with batteries.
|
|
| ... products without information |
| |
Built Tough Enough to Last a Lifetime. A durable aluminum and anodized frame backed by a tri-lens reflector with a 6 degree beam angle and tempered glass lens light up anything in your path. A double sealed mechanical switch and 8 hour burn time gives intense light dispersion to a max depth of 650 feet.
- Tempered glass lens with Fresnel dome allows more unfiltered light
- Double sealed mechanical switch with Security Lock
- Tri-lens reflector with a 6 degree beam angle
- Minimum 8 hour full power burn time with diminishing output for up to 40 hours
- 10,000 hour lifespan LED bulbs
- Max Operating Depth: 650 ft / 200 meters
- Double O-Ring Seals
- 300 lumens / 5500 degrees kelvin
|
|
|
|
|
|
|
FLASH LED
The heart of the Flash flashlight is a revolutionary LED made up of 4 elements, grouped together in a single PCB, protected by a lenticular dome face in silicon.
The result is a flashlight with an illumination capacity above 6000 Lux with a heat temperature of 6200º Kelvin.
The LED is driven by special electronics that guarantee lighting consistency over time.
This is all assembled on an aluminium frame and sealed with a special resin that makes the LED group (LED, electronics and parabola) perfectly water-tight.
In fact, if the flashlight accidentally flashlight fills with water, the LED group will not be damaged and, after rinsing with fresh water, and drying, it can be used as if it were new. In this case, only the batteries are damaged and must be replaced.
The recall spring can be removed so the flashlight can be kept in the On position, and the switch can be then held in this position thanks to the special safety catch.
The Flashlight is powered by 6 AA 1.5V batteries, Energizer Lithium are supplied with the flashlight, that allow for a range of 120 minutes of constant use and 300 minutes of intermittent use with 60 seconds ON/60 seconds OFF.
Size: Length 195mm x Diameter 59mm Weight in air with 6 Lithium batteries = 390g.
Weight in water with 6 Lithium batteries = 230g.
|
|
|
Nova is a lightweight, compact dive light that provides up to eight hours of high-intensity light from an LED bulb. It is bright enough to be used as a primary light, and compact enough to be used as a backup.
|
|
Infinite light.
X-Led stands apart for its high autonomy, its reliability, and sturdiness thanks to its body in anodized aluminum alloy. In order to allow an easier grip, a practical metal handle is available as an optional.
|
|
|
The most recent model among the Moonlight series of flashlights, Moonlight Led features a 3 Watt Led bulb that produces a very powerful and concentrated light beam with a power of 5.500 °K. The performance of the resulting beam is comparable to the one produced by a standard 10W bulb. Burn time is high: 30 hours with 6 non rechargeable batteries (included). The head of the flashlight features a new design and made in alluminum with a rubber protective cover.
|
|
|
|
|
|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED
|
|
The triple LED dock light (Ref. S40351) uses three 3 watt LED’s. The light is IP 68.
If this light is to be used underwater, the driver required is S41105 for each individual light.
If this light is to be used above water, the driver required is S41104 for every 2 lights.
|
|
DockGLOW lights are ideal for backyard docks, marinas, waterfront restaurants, sea walls, resorts, etc. They utilize the latest state of the art, high output, Light Emitting Diodes (LED's) as their source. DockGLOW LED's are designed to run off standard 110 Volt household current through the use of a UL certified power supply box. DockGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The circuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount DockGLOW lights on the pylon, at least 6-8 inches below the water line (below the low tide water line). Then run the included 30' marine grade power supply cable to the power supply junction box (included). The cable connectors offer a simple-to-use, quick connect, which plug together in only one way.
|
|
- High brightness Leds module lamp
- Colour temperature : 6500°K
- Beam angle: 100°
- Power supply: 24V 700mA
- Housing: stainless Steel
- Depth rate: 1000mt
- Weight in water: 340gr
- Max length: 107mm
- Other underwater connector under customer request
|
|
|
|
|
|
|
The coolest-running deep-rated LED light in the world has been developed by top ROV manufacturer, Saab Seaeye.
The super-intensity low power light comes with a unique design of thermal control that avoids failure through overheating. No other LED light has this capability.
Telemetry or PWM controlled, it monitors its status and gives data feed-back on current, input supply voltage, LED voltage, LED temperature and light output percentage, so is ideal for providing data for the diagnostic capability of the new generation of control systems. The LED light brightness can be controlled over its full range of brightness and retains a constant colour temperature over the range compared with tungsten halogen, which varies considerably when dimmed.
Rated at 6000 metres, the new LED light joins Saab Seaeye's 3000 metre rated technologically advanced range of LED lights especially developed to bring extra reliability, low power consumption and greater luminosity to underwater systems.
This means that in addition to bringing greater luminosity performance to ROV operations, underwater system developers worldwide can incorporate this range in other underwater equipment designs such as diver equipment, as it has a universal power interface that can take a wider range of power options than any other LED light. A mounting arrangement to provide horizontal and vertical adjustment of the light position is also provided.
Dave McInnes, Saab Seaeye's electronic design engineer behind the concept, says the new LEDs are far superior to both halogen and incandescent lamps.
'They use a quarter of the power, have a life of over 50,000 hours compared to 1000 hours for halogen and give higher luminosity than a 150 watt bulb - with a daylight white for more accurate colour rendering of video images than the typical 'yellow light'. Important too, adds McInnes, is they are more robust than other lighting systems.
The new range of LED lights is being fitted to all Saab Seaeye ROV systems. The Company is the largest electric ROV manufacturer in the world, supplying systems to the oil and gas industry, defence forces, marine science and hydro engineering. Its parent company, Saab Underwater Systems, is itself a world leader in sensor systems, precision engagement systems, and remotely operated and autonomous underwater vehicles.
|
|
CANTALUPI DIMMER CLL FOR LED LIGHTS
The CLL Dimmer is a driver for the light intensity control of not only L.E.D. downlights and CLL (Cantalupi L.E.D. Lighting) L.E.D. illuminating systems, but also of monochromatic L.E.D. strips and RGB systems.
The device manages 3 separate channels that can each supply up to a maximum of 6A.
Main power supply: 10-30 V DC
Stand-by absorption: 50mA
Inputs: 3
Output: 3
Input types: Push Buttons - Monitor touch screen- Serial BUS RS485
Max Load per Output: 6A
Protocols: MODBUS or DMX (on request)
Master Slave and Control management: 2 x RS485 Serial BUS ports
Installation: DIN Bar
Channels protection: 3 resettable fuses 6A with thermal protection
Power fuse: 20A blade fuse
Operating Temperature range: from 0° C to +40° C (from +32° F to + 104° F)
|
|
Lighting is an important aspect of any marina development. Electro-Tec can offer both functional and aesthetic lighting solutions. All Electro-Tec pedestals are supplied with photocell controlled 15W energy saving lighting as standard and can be fitted with the following additional features:
L.E.D. – replacing the standard 15W energy saving illumination, L.E.D. provides a long term solution to marina illumination. Electro-Tec L.E.D. lighting not only consumes up to 85% less electricity than our standard lighting, it will last for up to 15 years based on 8 hours use per night.
L.E.D. Deck Lighting (pictured)– designed to offer a unique appearance, deck lighting can be provided in most colours and offers the same advantages as above.
Electro-Tec also offer a number of lighting solutions including underwater lighting, low and high level illumination. Please contact us for more details.
|
|
|
Lumitec’s recently designed Cockpit Flood Light offers the same great light output as it predecessors with a stylish new appearance. Utilizing Lumitec’s proprietary light engine technology, it is a perfect replacement for 55W Halogens. The luminaire’s small size (70% smaller than comparable lights) and low power (80% less current draw than a 55W Halogen) have made it an ideal selection for many exterior locations. Completely sealed and IP 67 compliant, expected output life is more than 22,000 hours. Powder coated die cast aluminum housing is salt-spray tested to 3,000 hrs. 10 to 30VDC, draws 900mA @ 12VDC.
|
|
|
Lumitec's LED Cockpit Flood Light is a perfect replacement for dated, power hungry 55W Halogens. The company's proprietary light engine technology provides a wide even beam, without the hotspots or banding that cause eye fatigue. The smaller size (70% smaller than comparable lights) and lower draw (80% less power than a 55W Halogen) have made it a favorite among top-tier boat builders. The luminaire is completely sealed, IP 67 compliant and boasts an expected life of more than 30,000 hours. 10 to 30VDC, draws 900mA @ 12VDC.
|
|
|
Lumitec’s new Maxillume flood light will change the way you think of LED illumination. Boasting the light output equivalent of a 200 to 300 Watt Halogen light, the light has already been selected by the US Government for installation in their coastal interdiction vessels. The solid aluminum housing is completely sealed and IP67 compliant. Best of all, the luminaire operates on 12 or 24V DC systems so there is no need to run the generator.
|
|
|
This light can be surface mounted in areas needing low level lighting for steps, walkways, doorways and for general lighting on smaller boats. The bolted bezel is machined stainless steel 316 L and ensures a strong exterior for exposed areas. It is available with a frosted lens. This light uses the best quality materials and is designed for longevity and tested for water tightness to IP65. DV26 is available in 12 volt LED cool white, warm white and blue.
|
|
|
The Flush Mount LED Cockpit Flood Light is a follow up to Lumitec%u2019s highly successful bracket mount LED flood light. Utilizing Lumitec%u2019s proprietary light engine technology, it is a perfect replacement for 55W Halogens. The luminaire%u2019s small size (70% smaller than comparable lights) and low power (80% less current draw than a 55W Halogen) have made it a favorite among top-tier boat builders. Completely sealed and IP 67 compliant, expected output life is more than 22,000 hours. Its powder coated die cast aluminum housing is salt-spray tested to 3,000 hrs. 10 to 30VDC, draws 900mA @ 12V.
|
|
|
|
see the results for the following category : 
