|
|
Unlike other torches in the market that have a yellowish beam, the MityLite 1900 uses a hi-intensity Xenon lamp that produces a powerful, bright beam. Use this compact torch to cut through thick smoke, fog, and dust. It is submersible to 150 meters and comes with a twist on/off lens shroud. The 1900 is ideal for any situation. Powered by 2 AAA alkaline cells. Certified to ATEX safe for use in hazardous Zone 1 (Category 2) locations.
|
|
This one is built to last. The unbreakable ABS body resists chemicals, water and corrosion. The polycarbonate lens and focused Xenon lamp module produce a tight white beam that penetrates smoke and fog. The PeliLite 1800 is submersible to 150 meters, thanks to the o-ring seal and twist on/off lens shroud that eliminates leaky switches. It is powered by 2 C akaline cells. Certified to ATEX Zone 2 (Category 3).
|
|
|
Popular with firefighters and adventure seekers. The unique easy slide thumb switch on the StealthLite 2400 is easy to operate, even with gloves. The tough resin body is corrosion proof and resistant to extreme temperatures. The Xenon lamp is powered by 4 AA alkaline cells (included) for a bright beam that penetrates thick smoke, fog, and dust. Attach the StealthLite to one of our optional helmet light holder clips and you have a hands-free light for work or play. Certified to ATEX Zone 2 (Category 3). Submersible to 150 meters.
|
|
|
This powerful torch was designed with one big goal: SAFETY. The SabreLite 2000 carries more approvals than any other torch on the market today making it extremely safe. The SabreLite is o-ring sealed with a twist on/off lens shroud and comes with a polarity battery guard tray that safeguards against dangerous "outgassing" of hydrogen from an accidentally reversed cell. It is powered by 3 C alkaline cells, submersible, and has an ABS resin body which resists chemicals, corrosion, and extreme temperatures. Unlike ordinary torches with yellowish beams, the SabreLite's incredibly bright Xenon lamp produces a powerful collimated white beam of light. Peli's SabreLite is the leader in quality and performance. Certified to ATEX Zone 2 (Category 3).
|
|
|
The Leatherman Serac S2 LED flashlight is all business. Sure it looks pretty innocuous hanging from your keychain, but don't be fooled. With two settings pumping out 35 lumens on only one AAA battery, and an aircraft-grade aluminum body with stainless steel bezel, there's nothing little about it. And the S2 has a textured reflector and glass lens for a completely smooth, article-free light pattern.
|
|
|
HT-291 LED Aluminum Mini Torch - Single white LED with magnifier for brilliant defined beam. Over 7 hour burn time. Aircraft aluminum housing. Ergonomic flush mount rubber switch. O-ring sealed for water resistance. One AA battery included. Clam pack.
|
|
|
HT-1000 LED Aluminum Hand Torch - 1-Watt Ultra Bright LED – 10X brighter than standard LED. Up to 50 hour burn time. Aircraft aluminum housing. Ergonomic flush mount rubber switch. O-ring sealed for water resistance. Wrist strap, case and (3) AAA batteries included. Clam pack.
|
|
Scottlamp Waterproof LED Utility Light
Ideal Lighting for Camping Trips and working in the wet
The waterproof LED inspection lamp is ideal for wet environments.
This is a waterproof LED light providing a bright light with low power consumption. Designed to work in wet conditions, the Scottlamp LED Utility Light (SLUL) is ideal for a variety of commercial and leisure applications.
The SLUL is a waterproof, robust and powerful, low voltage, bright light incorporating the latest multichip white LEDs (Light Emitting Diodes). While only drawing 0.2 amp, means the SLUL is ideally powered from car or boat batteries. The SLUL is an ideal emergency back up inspection light. It uses little power and will last a lot longer than conventional lights: essential when power is at a premium for more vital applications.
|
|
|
This lightweight and compact torch floats with the beam upright. Complete with an Xenon bulb and wrist lanyard.
|
|
4 LEDs of the latest generation and 8 hours of autonomy with a brilliant white, penetrating light.
The Lumen Led uses 4 LEDs of the last generation, low energy consumption LEDs with high lighting efficiency.
The LEDs are super powered for a colour temperature of over 6.000°K, and have a working life of around 50.000 hours.
It is fitted with an electronic circuit that ensures the best power supply and protects the LEDs.
The power supply is provided by 6 C size, torch batteries providing more than 8 hours autonomy.
The underwater light has a power that is comparable with more than 50 Watts.
The metal lighting head, with its 4 LEDs and electronic circuit, is completely watertight and provides added protection against accidental
water infiltration.
|
|
|
We've taken our popular 2600 and outfitted it with our Recoil LED module. What you get is a hands-free light that's extremely powerful, durable, and efficient. The HeadsUP Lite 2680 uses a 1-Watt LED that's aimed backwards into the reflector. 100% of the light is captured and aimed forward as a tight collimated beam that's as bright as an incandescent. The body is made of tough ABS resin that's corrosion proof, submersible and virtually indestructible. It is powered by 4 AA alkaline cells (included) and comes with a rubber strap for hard hat use and an adjustable cloth strap for bare head. Certified to ATEX Zone 2 (Category 3).
|
|
M4 Marine, adjustable reflector, red or white light
The M4 Marine is a compact, lightweight and high performing LED-headlamp using the same design concept that has proved such a success on the other M-models.
Due to its compact design, the M4 Marine is the perfect choice when weight and space is crucial. Also ideal when high performance is required at sea.
The new M4 Marine has a rugged, splash-proof body housing three high-power LEDs (2 white and 1 red). This LED technology provides the performance necessary for close range work (up to 20 meters), but with extremely low power consumption. Up to 150 hours battery life and weights only 80g with batteries.
|
|
| ... products without information |
| |
Mimic panel X for navigation lights and bilge pump control for motor yacht.
|
|
|
This light can be surface mounted in areas needing low level lighting and for general lighting on smaller boats. The screwed bezel is machined stainless steel 316 L and available with a clear or frosted glass lens. This light uses the best quality materials and is designed for longevity and tested for water tightness to IP65. The DV12 is available with a MR11 lamp option as well as LED's with single and uniquely multi colour options. One colour can give mood lighting while the other more functional. It is available in cool white, warm white, red, blue as well as red/white and blue/white in 12 and 24 volt.
|
|
|
Lumitec's LED Cockpit Flood Light is a perfect replacement for dated, power hungry 55W Halogens. The company's proprietary light engine technology provides a wide even beam, without the hotspots or banding that cause eye fatigue. The smaller size (70% smaller than comparable lights) and lower draw (80% less power than a 55W Halogen) have made it a favorite among top-tier boat builders. The luminaire is completely sealed, IP 67 compliant and boasts an expected life of more than 30,000 hours. 10 to 30VDC, draws 900mA @ 12VDC.
|
|
|
Lumitec’s recently designed Cockpit Flood Light offers the same great light output as it predecessors with a stylish new appearance. Utilizing Lumitec’s proprietary light engine technology, it is a perfect replacement for 55W Halogens. The luminaire’s small size (70% smaller than comparable lights) and low power (80% less current draw than a 55W Halogen) have made it an ideal selection for many exterior locations. Completely sealed and IP 67 compliant, expected output life is more than 22,000 hours. Powder coated die cast aluminum housing is salt-spray tested to 3,000 hrs. 10 to 30VDC, draws 900mA @ 12VDC.
|
|
|
Lumitec’s new Maxillume flood light will change the way you think of LED illumination. Boasting the light output equivalent of a 200 to 300 Watt Halogen light, the light has already been selected by the US Government for installation in their coastal interdiction vessels. The solid aluminum housing is completely sealed and IP67 compliant. Best of all, the luminaire operates on 12 or 24V DC systems so there is no need to run the generator.
|
|
|
This light can be surface mounted in areas needing low level lighting for steps, walkways, doorways and for general lighting on smaller boats. The bolted bezel is machined stainless steel 316 L and ensures a strong exterior for exposed areas. It is available with a frosted lens. This light uses the best quality materials and is designed for longevity and tested for water tightness to IP65. DV26 is available in 12 volt LED cool white, warm white and blue.
|
|
|
The Flush Mount LED Cockpit Flood Light is a follow up to Lumitec%u2019s highly successful bracket mount LED flood light. Utilizing Lumitec%u2019s proprietary light engine technology, it is a perfect replacement for 55W Halogens. The luminaire%u2019s small size (70% smaller than comparable lights) and low power (80% less current draw than a 55W Halogen) have made it a favorite among top-tier boat builders. Completely sealed and IP 67 compliant, expected output life is more than 22,000 hours. Its powder coated die cast aluminum housing is salt-spray tested to 3,000 hrs. 10 to 30VDC, draws 900mA @ 12V.
|
|
PAR 30
The PAR 30 floodlight can be surface or flush mounted. The flush requires an insert which is welded into the superstructure. The bolted stainless steel bezel can house 4mm or 15mm thick glass. The 15mm glass is recommeneded for areas exposed to heavy weather. The PAR 30 can also be supplied with a screwed bezel type is recommended for deck head downlighting.
Application: Decks and masts
Bulbs: Metal Halide 70 or 150 watt and Halogen 100watt
Reflectors: Multiple choice with beams of 8, 24 and 45 degree angles
Power Supply: Metal Halide – 120/230 Volt AC
Halogen – 12/24 Volt DC or 120/230 Volt AC (transformer)
Lens: Available in 4mm or 15mm toughened glass
Bezel Material: Polished stainless steel
|
|
MR11 and MR16 Surface Mounted Lights
The exterior MR11 and MR16 deck lights are surface mounted and have been tested to IP65. The lights are available in two different sizes with a screwed or bulkhead fitting. Both lights are manufactured in a polished stainless steel and can be installed in most places which need direct lighting.
Application: Decks, bulkheads and overheads
Bulbs: Halogen low voltage
Power Supply: 12/24 volts. MR 16 35 watt maximum and MR11 20 watt maximum
Casing Material: Polished Stainless steel
Lens: Clear
|
|
MR 16 Adjustable Downlights
This exterior adjustable downlight has been installed on many yachts and is designed for exterior use.
Application: Exterior overheads
Lens: Clear or frosted
Type of bulb: M16 Halogen lamp. Maximum 50 watts
Power Supply: 12/24 Volt or 120/230 Volt with an external transformer
Bezel Material: Polished stainless steel
|
|
Oval Low/High Level Adjustable Flood Lights
This oval low or high level lights with twin flood lamp can be installed almost anyway except exposed areas or below the ‘maindeck’. This versatile light could also be used as a down light.
Application: Decks, overheads and bulwark lights
Bulbs: Two MR11 20 watt halogen lamps. Maximum total 40 watts or 3 x 8.5 watt lamps
Power Supply: 12/24 Volts and 120 or 230 Volts is available with and external transformer
Bezel Material: Polished Stainless steel
Lens: Clear or frosted glass
|
|
MR16 Low and High Level Flood Lights (S3025B and S3052S)
This particular light is available with two different depths of glass. The light with the 4mm thick glass bezel is suitable for fitting into exterior deck heads and superstructure not exposed to heavy weather. For areas exposed to heavy weather, the light is fitted with a 15mm glass bezel. Installation requires an insert, available in both aluminium and stainless steel, so the lights is flush.
Application: Decks, steps and masts
Types of Bulb: Halogen, MR16 50 watt maximum.
Power Supply: 12/24 or 120/230v which requires a transformer
Insert Material: Aluminium or stainless steel
Bezel Option: Bolted or screwed
Lens: Clear or frosted, 4mm or 15mm thick available
|
|
|
|
see the results for the following category : 
