|
|
Light Dimmer
Micro controlled system
Featured shortcircuit protection
Thermal protection
Radio Interference free
Led working status
Unlimited power expansion
Memory on Switch-off
|
|
The ANNAEVA push buttons type have been designed for the control of low voltage small loads such as relays, interfaces, dimmers, etc. via normally opened push buttons with momentary action.
The push buttons, depending on the model, have from 1 to 6 push buttons.
DOME TECHNOLOGY
FOR INTERIORS
VERY LOW RECESS
Protection grade IP 20
Material Stainless Steel
Spring Installation
|
|
CANTALUPI DIMMER CLL FOR LED LIGHTS
The CLL Dimmer is a driver for the light intensity control of not only L.E.D. downlights and CLL (Cantalupi L.E.D. Lighting) L.E.D. illuminating systems, but also of monochromatic L.E.D. strips and RGB systems.
The device manages 3 separate channels that can each supply up to a maximum of 6A.
Main power supply: 10-30 V DC
Stand-by absorption: 50mA
Inputs: 3
Output: 3
Input types: Push Buttons - Monitor touch screen- Serial BUS RS485
Max Load per Output: 6A
Protocols: MODBUS or DMX (on request)
Master Slave and Control management: 2 x RS485 Serial BUS ports
Installation: DIN Bar
Channels protection: 3 resettable fuses 6A with thermal protection
Power fuse: 20A blade fuse
Operating Temperature range: from 0° C to +40° C (from +32° F to + 104° F)
|
|
Elby is the wireless push button battery and maintenance free.
It can be installed everywhere for several functions for the expansion of the lighting system, buzzer installation and others without masonry works and saving time.
|
|
|
|
|
|
|
NERO is a capacitive touch switch button which relaces the standard switch and push buttons for the switching on/off function and for the control of audio/video devices but with a step ahead. Unlike the standard switch buttons, as you don't need to make holes for it, it can be used in the most unusual modes and places thus allowing to give to the boat an unique style. Its very small dimensions enable space saving and give full to the interior designers.
NERO can be set as switch or push button and is available in several models, from one up six switches, it can disappear behind whatever surface or can be provided with a frame of different colours, versions and materials. It is also being properly designed in order to fit perfectly inside plates and material of the main electric productors suppliers.
Among the new models very interesting are NERO DIMMER an electronic light control provided with dimmer device at a low voltage and NERO DIMMER LED the electronic dimmer at low consumption for power led.
|
|
The Smartswitch NavLight monitor (NV-8000)will monitor and control all the Navlights and alarm when there is a fsulty or blown light. Navlights can be put into 6 programmable groups, twilight sensor option, all lights are name programmable,
Also available is the (NV-2000) will monitor up to 32 lights.
|
|
|
|
|
|
|
Power production and climate control are among your boat's most critical components. Naturally, you will install the highest quality systems, to work seamlessly in concert.
High energy demand systems like air conditioning, stabilizers and bow thrusters are becoming more common on modern vessels. With multiple staterooms, power configurations and night-versus-day demands, properly loading your generator set can be challenging. Without proper load management, the generator set can run underloaded, leading to unnecessary maintenance issues.
To address these issues, the Technicold Linear Load Bank features variable outputs to manage electrical load on each individual 3 phase leg. This capability balances all phases in a widely variable load share solution. The ideal bank for a boat with multiple AC configurations, the TECHNICOLD Linear Load Bank is the only fresh water cooled, non-modular load bank commercially available.
By supplying a supplemental electric load to the generator, TECHNICOLD load banks ensure that the generator is always properly loaded. Engine activity is easily monitored with the Load Bank Controller, which tracks each leg of power from the ship's electrical panel. The digital controllers analyze the data and transmits commands to the load controls. If the vessel's power usage fluctuates, the controller uses pre-programmed parameters to stage up to three electric loads. It will even provide load shedding as needed.
Protect your boat's most important assets; insist on TECHNICOLD By Northern Lights.
|
|
| ... products without information |
| |
Navigation light extremely durable to mechanical deterioration in
cast brass housing with lens of through coloured glass.
Input voltage: 12V AC/DC , 24V AC/DC
Integrated terminalbox - no need for extra connection box.
Designed for use in artic and tropical waters.
20 Years warranty on lantern.
|
|
Navigation light for vessels over 20 meters
Navigation light extremely durable to mechanical deterioration in aluminium with lens of through coloured glass.
Input voltage: 110/250V, 24V
Integrated terminalbox - no need for extra connection box.
Light source: 55Watt for vessels 20-50 meters, 85Watt for vessels more than 50 meters.
Designed for use in artic and tropical waters.
|
|
Navigation light for vessels 20-50 meters
and over 50 meters in lenght.
Navigation light extremely durable to mechanical deterioration
in cast brass housing with lens of through coloured glass.
Input voltage: 24V AC/DC , on request all-round lights can
be supplied for 115/230V AC.
Integrated terminalbox - no need for extra connection box.
Designed for use in artic and tropical waters.
20 Years warranty on lantern.
|
|
|
|
|
|
|
Commander Utility Helideck Lights Control System
The TEF 4500 Commander Utility Helideck Lights Control System (HLCS) is a complete control system for all helideck lights. Based upon the Commander Utility technology, this control system allows the control panel to be installed in the bridge or radio equipment room, while the enclosure with all other necessary components may be installed further away. Between the two a simple Cat 3 ++ cable ensures that the industry-proven RS-485 network provides a reliable two-way communication.
The control panel includes 5 buttons that control the perimeter lights, floodlights and windsock lights. In addition the panel includes a main power button for the entire system, an alarm acknowledge button and a button to dim the backlight. Three spare buttons are available, which may be used if additional components are installed in the control enclosure. Customer- specific text on buttons is optional.
Among the unique features of the system is the capability of connecting several control panels to the network, enabling full control and monitoring from several locations. Optionally a gateway may be installed to provide two-way communications to an external control system (NMEA-0183 compliant/proprietary), as well as three additional contactors and circuit breakers to make full use of the 8 control buttons at the control panel .
|
|
Navigation lights control panel for the TEF 2840/TEF 2870 Lanterns.
Main supply 24V AC/DC
Control panel series TEF4720 are designed to switch and fuse navigation and signalling lights on all kind of ships.Panels are approved and certified by DNV.
Panels are offered in three different versions, for 8, 12 and 16 lantern
|
|
Signal Lights Control Panel 230 (115)V system
For Suez, Panama- Rov- and Signal lights
The TEF 4740 control panel serie is constructed operate and monitor suez/signal lights on all kinds of vessels. Number of circuits and mimic is specified by customer.
|
|
hite light 0.75 candelas for 60 hours
5 years life duration
|
|
|
Water activating lights are being lit automatically when getting in contact with water. The Regatta lifejackets for the professional market have a mounting solution for light in front. Can be mounted either outside- or in a moulded pocket solution. Water activating lights have according to SOLAS/USCG a guaranteed lifetime of 5 years, expir y date printed on the lights.
|
|
|
|
|
|
|
CONQUEROR
Codice prodotto: EPLD0005/6
This technologically superior new generation lifejacket light offers considerably increased visibility achieved by means of powerful white LED lamp.
- Virtually indestructible, it has a waterproof, corrosion, fire and temperature resistant case
- Its lamp never burns out
- Suitable for all types of lifejackets, easy to install and easy to use
- The light dome is positioned in such a way as not to create any shadow zone and guarantees equal light emission in all directions of the upper hemisphere
- Its compact size and light weight reduce transportation costs and allow for easy stowage of the lifejackets
- It is the only floating light in today%u2019s lifejacket lights market
- Special robust clip makes the light less vulnerable for tampering
TECHNICAL SPECIFICATIONS
Case Size - 70mm x 38mm x 37mm
Weight - Only 40 gr
Volume - Only 9.8 cm3
Material - Polycarbonate
Beam Angle - All directions of the upper hemisphere
Luminous Intensity - > 0.75 cd
Activation - Automatic or manual
Flash Rate - 50 < flashes per minute < 70
Lamp Type - Powerful white LED
Battery Type - Lithium, 5 years life (not replaceable)
Operational Life - Exceeds 8 hours
Operating Temperature -20%u02DAC to + 65%u02DAC (-4%u02DA F to 149%u02DAF)
Storage Temperature -30%u02DAC to 65%u02DAC (-22%u02DA F to 149%u02DAF)
|
|
Automatic SOLAS life jacket light, 75 cm cable between battery and light, at least 4 years. For all inflatable life jackets and foam life jackets.
The new life jacket light SECULUX CFX II functions in sea and fresh water at low temperatures, and has a manual off switch. The light and battery are separate components, there are various easy ways of fitting the light, and it is easily stowed in your life jacket.
|
|
- HL8-9M manually activates with built-in switch
- Bright, steady light of .75 cd intensity visible all directions of the upper hemisphere
- Attachment tabs accommodate up to 2.5 cm (1 inch) wide webbing
- Dragon Clip™ (included) provides secure retro-fit attachment to almost any style life jacket in a matter of seconds
- Single piece construction for ease in handling during installation or in a crisis
- Compact size for ease of storage
- Operates in fresh or salt water
- Operating life - Exceeds 8 hours @ -1°C (30°F)
|
|
Sea Spark Automatic Universal Life Jacket Light
Sea Spark is a bright wide angle LED automatic universal life jacket flashing light. It is designed to fit existing life jackets and to be specified with life jacket manufactures.
This is a long-lasting, bright, easy-to-fit, flashing LED light with easy automatic function.
|
|
- Approved to IMO SOLAS, MED, MCA and RORC requirements
- Flashing "all around" light
- Battery powered
|
|
Marine Distress LED Strobe, Light Saver attaches easily to your life ring or life vest and automatically turns on when contact is made with the water. LED strobe automatically turns off when dry. Light Saver stays afloat to increase visibility in the water.
Features:
- Automatically activates in water
- Weather and wake resistant
- LED bulb life is approximately 100,000 hours
- Constructed with double insulated wiring
|
|
|
|
see the results for the following category : 
