|
|
|
The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different kits can be found on the price list.
|
|
HYDRAULIC HELMS
The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different kits can be found on the price list.
|
|
HYDRAULIC CYLINDERS
Our steering cylinders are in bronze and steel with stainless steel rod. The ball joint is in steel as well. The cylinder's dody is properly painted to work in a marine environment and can be in different colours on specific request. Each cylinder is supplied with brass fittings in different sizes. ACCESSORIES In the BCS products range there is a wide choice of hydraulic steering accessories, too, such as non return valves, by-passes, relief valves, steering wheels, hosing and fittings of any type and seize. Some of our standard models are shown here below. For any further reference about a great number of special configurations for the most various applications our Technical Department can supply any detail about seizes and technical data.
|
|
|
Introducing the HyDrive Model 212T Sport cylinder which offers the power and reliability of hydraulic steering at prices which are more than competitive with many mechanical systems. This compact tube-mount cylinder is capable of handling up to twin 150HP engines (counter-rotating) or a single 235HP with comfort. It attaches directly to the outboard motor's tilt-tube just like the old push-pull cable steering! It also attaches to Stern-Drives in the same manner, and can be used on Sterndrive Power steering cylinders making dual stations very simple.
|
|
210BH “Bullhorn” Cylinder
There are several different ways to steer outboard motors. You need to consider the room available and the design of the boat’s engine well. The most popular of our outboard steering cylinders is our Model 210BH Bullhorn unit. This is the most powerful and durable cylinder of its type on the market. It is capable of handling single or multiple engine installations up to 1200HP combined*
What sets these HyDrive cylinders apart from the competition is the materials used to build them. While other brands use anodised or painted aluminum alloy cylinders, HyDrive uses only chromed brass, bronze and stainless steel - built for the toughest marine environment.
The 210BH cylinder mounts very simply to the tilt-tube of the outboard motor and fits neatly under the front of the motor cowling. It is compact in design and requires only a small amount of clearance (615mm). It requires considerably less space than some competitors “front mount” design cylinders.
|
|
|
A very popular cylinder type for outboards is the HyDrive tube-mount or side-mount 210T (balanced) and 210TSE (unbalanced). It can handle the same horsepower as the powerful 210BH Bullhorn cylinder, but it is simpler and cheaper to install. The only restriction to fitting them is the side-clearance requirements in the engine well. Made of chromed brass, bronze and stainless steel, there are two versions available, - the 210T which is a balanced cylinder, and the unbalanced 210TSE which has slightly higher turns one way than the other. It's advantage is that it requires less clearance for installation. They can also be fitted directly to splashwell brackets to replace any cable steering. It's really that simple.
|
|
216FM “Front Mount” Cylinder
The HyDrive Model 216FM cylinder is designed to fit all brands of V4 and V6 Outboards*. It offers the advantage of rigid mounting directly in front of the motor. While it does require more well-space than the “Bullhorn” type cylinder, the hydraulic hoses remain stationary.
The marine brass cylinder is nickel coated and has special non-conductive and wear resistant rod-guides, offering maximum protection against electrolysis and other damage. It is capable of handling single or twin V4 and V6 outboards without torque feedback (single motors to 235HP or twin up to a total of 400HP- counter rotating). Combined with the Admiral series 101 helm, it offers the ultimate in boat handling for you and your family.
|
|
With decades of experience in hydraulics, combined with state of the art production facilities, Hydromar can offer steering equipment as a complete package. Reliability rests not only with the steering gear itself, but also the hydraulic systems that drive it.
Within our modern premises, we engineer, produce and test these steering systems ensuring flexibility in design in combination with the highest quality.
Whether your requirement is for a simple manual hydraulic steering wheel or a sophisticated power assisted steering system with autopilot, a HYDROMAR solution is at hand.
|
|
| ... products without information |
| |
Mechanical steering systems , wire-chain ( series 604) rack and pinion ( series 607) and gear boxes ( series 650 )for sailboats from 8,00 to 30,00 metres and over.
Traditional aluminium pedestal - Fiberglass pedestals with the possibility to assembly engine panels,instruments housings and other accessories
|
|
|
|
|
|
|
Edson’s latest addition to their VISION SERIES line of sailboat steering pedestals is the new VISION II model, offering an expansive mounting area for larger LCD displays, but with a compact design for smaller cockpits.
The new pedestal design is ideal for both boatbuilder and aftermarket installations. For the boatbuilder, the Vision II’s pre-installed engine control cables and chain/wire rope take several man-hours off installation time. For the boatowner replacing a pedestal, the VISION II is a time and space saver. Ideal for retrofit installations on older boats, it is as an alternative to adding a new pedestal guard and instrument housing with associated wire routing.
The VISION II’s replaceable faceplate allows the mounting of a large LCD display or several smaller instruments and puts your displays within easy reach and view, right at the helm where you need them. The optional compass bowl sits up at eye-level to make taking bearings easier and the integrated single-lever engine control fits flush with no external pipes or housings - all in a roomy, yet compact design with all wires running internally. Plus, it takes up less cockpit space than a classic pedestal with guard pipe.
|
|
|
With the 300 series pedestal Jefa Steering introduces a new style integrated pedestal design. All major functions for the modern helmsman are integrated in one central steering and control centre: The integrated engine control offers easy installation and quick access. The integrated compass offers easy and clear readings without the need of a separate binnacle. The 25 mm diameter stainless steel 316 guardrail is firmly attached to the pedestal head offering the best protection for the compass and pedestal combined with a strong support when moving around in the cockpit. The large glass fibre pedestal head accepts multiple instruments and control buttons. The integrated powerful and progressive friction brake can be operated without putting one's hand through the wheel.
|
|
|
Durable and elegantly styled, the Commodore™ wheel is a standard choice for yachtsmen the world over. Choose from sizes ranging in diameter from 66cm(26") to 122cm (48").
|
|
|
Suitable for boats up to 43 ft, the 250 steering pedestal combines smooth feeling of wire steering and easy installation of rack & pinion. This unique dual transmission system generates substantial weightsaving and roomsaving due to the absence of traditional steering quadrant. Especially designed for multihulls and twin-rudder yachts. The pedestal features a rounded base which creates a perfect match with the compass protection and increases available room below the cockpit floor.
|
|
|
With the 200 series pedestal Jefa Steering introduces a new style integrated pedestal design. All major functions for the modern helmsman are integrated in one central steering and control centre: The integrated engine control offers easy installation and quick access. The integrated compass offers easy and clear readings without the need of a separate binnacle. The 25 mm diameter stainless steel 316 guardrail is firmly attached to the pedestal head offering the best protection for the compass and pedestal combined with a strong support when moving around in the cockpit. The glass fibre pedestal head accepts 2 instruments and multiple control buttons. The integrated powerful and progressive friction brake can be operated without putting one's hand through the wheel.
|
|
|
With the 100 series pedestal Jefa Steering introduces a new style in classic pedestal design. The traditional "wine glass" shape is combined with modern lines into a beautiful pedestal design. The important accessories like the guardrail and the compass binnacle are integrated into the concept. Due to this innovative design no mountings bolts are visible on any part of the exterior of the pedestal. The integrated compass offers easy and clear readings without the need of a separate binnacle. The 32 mm diameter stainless steel 316 guardrail is firmly attached to the pedestal head offering the best protection for the compass and pedestal combined with a strong support when moving around in the cockpit. The integrated powerful and progressive friction brake can be operated without putting one's hand through the wheel.
|
|
|
|
see the results for the following category : 
