|
|
BLUEWATER DOUBLE HELM CHAIR WITH FLIP BOLSTER.
The perfect all weather seat for the fly bridge. With a contoured double flip bolsters to hold you in place during rough water.
|
|
Ladder back design with flip-up bolster for piloting from a sitting or standing position. Quilted seat and back cushions are padded with high-density foam treated to resist mold and mildew. Rugged hinge allows the bolster to flip up with ease. Ladder back frame and seat substrate constructed of high-density polyethylene. Cushions are covered with high quality marine grade vinyl.
Dimensions: No arm - 27" W x 21 H x 22-1/2" D
With arm - 35" W x 21" H x 22-1/2" D
|
|
|
Ladder back design with flip-up bolster for piloting from a sitting or standing position. Quilted seat and back cushions are padded with high-density foam treated to resist mold and mildew. Rugged hinge allows the bolster to flip up with ease. Ladder back frame and seat substrate constructed of high-density polyethylene. Cushions are covered with high quality marine grade vinyl.
|
|
The TRADEWINDS, a new downsized Helm Chair from Llebroc, is shorter and narrower, so that it can fit into smaller areas than full size seats.
It¹s built to withstand extremes in weather and punishing use year after year after year. And our AquaFlex suspension provides a level of absolute comfort you just can¹t find in other seats.
|
|
Barracuda - with flip bolster - with suspension
The ultimate helm seat for your runabout, performance sport boat, pontoon or cruiser. This seat offers a high tech, stylish look with loads of comfort features. Ergonomic molded foam cushions. Frame is contructed with a rigid polyethylene roto-molded core. Upholstered with mildew, UV and stain-resistent marine-grade vinyl. Dual track flip-up bolster allows piloting from a sitting, standing or leaning position. Available without flip bolster and suspension.
|
|
|
|
|
|
|
UPSCALE QUALITY, PREMIUM MATERIALS: Only the best materials are used in the Commander Seat Hardware System! With oversized anodized aluminum tubing, solid stainless steel slide rails, Delrin bearing rods, and CNC Machined or Precision-Cast Aluminum, the hand built Commander system makes a statement of class aboard any large boat or yacht.
ROCK SOLID, WOBBLE FREE
SWIVEL: 360 degree free rotation or positive lock in 45 degree increments - single lever operation with drag adjustment for optimal performance
SLIDE: 6" of fore and aft travel with positive locking at 1" increments. Solid 1" stainless steel slide rails with lubrication system are operated with a single lever for effortless and smooth precision operation
LIFT: Vertical travel of 4" is operated from a single lever in a lift-to-lift motion. A gas spring and lubrication system provide 112 lbs. of lift force
The Yachtsman II is available in 4 different Gas Rise Adjusting Height Systems.
For adjusting height availability please see options below.
Can be used with the Atlantis Helm Chair
|
|
This 4" diameter Shock Absorbing Pedestal provides the ultimate in boating comfort and safety. Manufactured with high grade marine aluminum, the pedestal provides the ultimate in safety, comfort and strength. The shock absorbing suspension allows passengers to remain seated when travelling on rough water, avoiding the need to stand up to feel secure.
Seaspension Pedestals are designed to retrofit into most boats with conventional rigid posts, and feature internal progressively rated springs that self-adjust to the passenger's weight. The Seaspesion Pedestal is available in 16", 19", 22" or 25" heights.
|
|
The newest seat base from Llebroc Industries, the Helmsman Bolt Down Base Stand is available in two models with variable height adjustments.
The LLE-5410 features a 4" mounting post which is adjustable from 18" to 28".
The LLE-5409 also has a 4" post, but adjusts from 23" to 33".
A 12-inch mounting plate bolts directly to the deck ensuring rock solid seat stability in even the roughest seas. This configuration makes it desirable for even the most luxurious boats.
Constructed of 5052-H32 1/4" thick aluminum, the entire unit is sealed against the most severe weather conditions by a black UV protected textured powder coat. The Helmsman fits all existing 4" marine hardware and seat mounts.
|
|
model 6691
manual seat pedestal bases
Pedestal bases for manual seats are in marine grade 316L stainless steal, provide full 360° rotation and include gas-lift height adjustment with manual locking. On automatic seats all cables pass through the pedestal to the controls on the armrests.
|
|
ULLMAN JOCKEYSEAT COMPACT
The Compact Seat is designed to fit in limited spaces.
Small footprint - takes up only marginally more space than the person seated in it. Horseshoe shaped handle - support for passengers sitting or standing behind. Extra padding on front of backrest. Zipped pouch for gear on backside of backrest. Available on molded bases in two different heights 750 mm and 810 mm All Ullman JockeySeats are designed to protect the rider from getting injured.
The seat design optimizes your body posture, while the spring and damping system takes care of the high forces during impact.
|
|
Helm Chair Series II Seating
Llebroc Industries developed its Series II Helm Chair Seating line for both indoor and outdoor use. Each of the three models in the Series II line offers an impressive list of features.
|
|
Helm Chair Series I Seating
Llebroc Industries developed its Series I Helm Chair Seating line primarily for use in an enclosed helm with limited exposure to the weather. Each of the nine models in the Series I line offers an impressive list of features including:
Standard seating features:
Powder coated 1” square tube steel frame with recliner mechanism
Molded foam seat cushion
Molded foam armrests
Molded foam adjustable headrest (optional)
Morbern Allante vinyl upholstery (See Specifications Sheet on website under Information section)
Under seat bottom upholstery cover Universal aluminum mounting plate
24 month warranty
FREE SHIPPING in the United States
(Surcharge for Hawaii, Alaska and Canada. International orders have shipping calculated by weight)
A new fold down footrest is now available on the Series I seating package. By ordering the optional mounting plate, you can now add the Series II footrest to your Series I seat package.
|
|
Helm Chair Series I Seating
Llebroc Industries developed its Series I Helm Chair Seating line primarily for use in an enclosed helm with limited exposure to the weather. Each of the nine models in the Series I line offers an impressive list of features including:
Standard seating features:
Powder coated 1” square tube steel frame with recliner mechanism
Molded foam seat cushion
Molded foam armrests
Molded foam adjustable headrest (optional)
Morbern Allante vinyl upholstery (See Specifications Sheet on website under Information section)
Under seat bottom upholstery cover Universal aluminum mounting plate
24 month warranty
FREE SHIPPING in the United States
(Surcharge for Hawaii, Alaska and Canada. International orders have shipping calculated by weight)
A new fold down footrest is now available on the Series I seating package. By ordering the optional mounting plate, you can now add the Series II footrest to your Series I seat package
.
|
|
|
|
|
|
|
Helm Chair Series II Seating
Llebroc Industries developed its Series II Helm Chair Seating line for both indoor and outdoor use. Each of the three models in the Series II line offers an impressive list of features including:
STANDARD FEATURES INCLUDED on all Series II Helm Chairs
All aluminum construction
Constructed of 5052-H32 aluminum the entire unit is protected by a UV texture powder coat.
Seat comes standard with Ultra Leather material
Dual Positive lock seat back adjusters for greater flexibility
Multi Position Adjustable Arms for greater comfort.
Llebroc's AquaFlex Shock Mitigating System was designed specifically for boaters, and it comes standard with the The Series II Helm Chairs. This system is unique to the marine seating industry, and provides a level of comfort that, until now, was simply not possible. It ensures the ultimate in comfort and safety. It is a major advancement in the design of marine seating, and was developed exclusively by Llebroc industries - To learn more about AquaFlex click here
Made for Indoor or Outdoor marine use.
|
|
Helm Chair Series II Seating
Llebroc Industries developed its Series II Helm Chair Seating line for both indoor and outdoor use. Each of the three models in the Series II line offers an impressive list of features.
|
|
Helm Chair Series II Seating
Llebroc Industries developed its Series II Helm Chair Seating line for both indoor and outdoor use. Each of the three models in the Series II line offers an impressive list of features.
|
|
model 6477
Is designed for both interior and exterior installation. Structured in stainless steel the seat can be either fixed or installed on sliding guides, has a low back and is available with or without armrests. Complete with custom upholstery in either top grain or synthetic leather this model can be coupled to create a sofa combination and may be installed (optional) with any of the bases displayed in our catalogue.
|
|
model 6594
Model 6594 can be manual or automatic and includes provisions for fixed or column installation. The armrests and back are folding and the upholstery on the headrest, seat and back has very stylish horizontal stitching. Power supply 24 V.
|
|
|
The brand new NorSap 2000 gives more comfort and sets a new standard for helmsmen chairs. Crafted in aluminium with genuine leather as standard.With several new user friendly functions and an exiting new look this model complete the range of helmsmen chairs. The seat has been ergonomically designed to give all operators a comfortable working station.
|
|
|
The Nor-Sap 1500 Yacht confirms to high standards of economic design and is mounted on a strong ø150mm telescoping column incorporating shock absorber and height adjustment. Seat and arm rests are upholstered as standard in leather. Other colors or fabrics available upon request. Crafted of aluminium.
|
|
|
Nor-Sap 1000 Yacht fits right into our well-known line of popular helmsman seats. This seat is designed to high standards of ergonomics and provides a stable lateral support. This seat is mounted on a Ø100 mm telescoping column which adjusts easily to the desired height. The Nor-Sap 1000 Yacht is made of aluminium. Seat, back and armrest are upholstered as standard in leather. Other fabrics available upon request.
|
|
|
Popular seat that converts from back-to-back to lounge/sleeper position. Two models available with a lounge length of 1750 or 1600 mm. Comfortable PUR cushions smoothen tough shocks. Durable plywood 12 mm. Heavy-duty hinges of stainless steel, fastened with stainless screws and tee-nut inserts. Staples stainless, large storage space beneath the seat. Different heights available. Strong support fitting.
|
|
|
Need more room? Choose the 1200W. With an over-all width of 54" it's the widest seat in the house. Complete with all STIDD ergonomic and comfort features with the addition of a removable center armrest. Available in powder coat or deluxe finishes with your choice of upholstery for the helm or fly bridge.
|
|
The most comfortable marine bench seat you can buy! With an over-all width of 45” the Series 1200 “Second-Mate” delivers true side-by-side seating STIDD style. Plus, this bench can fit where two individual seats can’t - saving a full 13” in width compared to the space it takes to install a pair of seats. Available in powder coat or deluxe chrome finishes with your choice of upholstery for the helm or fly bridge.
|
|
|
Seat pedestal in light alloy, 360° rotary, adjustable in height with horizontal sliders .
|
|
- Stainless Steel Pedestal
- The voltage is 24 V
- Stroke is 150 mm
- Caution! The seat mounted on the pedestal can not rotate, but an additional rotation unit is available
|
|
- This pedestal is completely made of stainless steel 316
- Minimum height is 395 mm
- The height adjustment is 200 mm
- The lever is used to pump up and lower down as well as to block the pedestal
|
|
The HYDROMAR HD CYLINDER is a hydraulic cylinder. The cylinder is 200 mm in height adjustable. The minimum height of the cylinder is 365 mm
A complete pedestal consist of two parts, the cylinder and a stainless steel fixed part, which is available in the height 50, 100, 150, 200, 250, 300 mm
The lever is used to pump up and lower down the pedestal as well to engage the brake for the rotation
The fixed stainless steel part is so constructed that fitting the pedestal on the Multi-Rail is very easy
Also available in complete stainless steel version
|
|
|
|
