|
|
|
Non-motorised trailers can be used as an alternative to motor-driven ones when crafts need to cover long distances. Non-motorised shipyard trailers and on road trailers homologated as Public Work Vehicles for road circulation are also available
|
|
BOAT LIFT motorised trailers are designed for the fast lifting and handling of crafts and are ideal for saving time and making maximum use of the areas within shipyards, ports and marinas.
BOAT LIFT motorised trailers are equipped with a lowered engine compartment so as to reduce as much as possible the vertical space occupied and as well as guarantee a better use and positioning of boats. The engine compartment is also fitted with a covering that has the function of reducing the engine noise and preventing water penetration.
|
|
Roodberg Launch & Recovery Slipway Trailer from 4 to 130 tons, pulled or self-propelled.
The most Cost-effective solution to Recover and Launch yachts from the water by means of slipway and transport them through your yard.
Over 30 years of experience with this concept. Ask Roodberg for the most suitable model!
|
|
Photo: Self-Propelled Trailer 20 M.T. capacity
These trailers are the best solution in order to exploit the spaces in shipyards as well as in the marinas, since they allow to place the boats very near with each other, which is impossible with Boat-Hoists and rather difficult and dangerous with traditional tow trucks. The operational principle is extremely simple: the trailer, having a U-shape in low position, is placed under the boat and, after putting the lifting supports in contact with the hull, is then lifted thus loading the boat, which is laid to the ground again in the desired position with the same procedure without using a tow truck.
|
|
Photo: Self-Propelled Trailer 60 M.T. capacity
These trailers are the best solution in order to exploit the spaces in shipyards as well as in the marinas, since they allow to place the boats very near with each other, which is impossible with Boat-Hoists and rather difficult and dangerous with traditional tow trucks. The operational principle is extremely simple: the trailer, having a U-shape in low position, is placed under the boat and, after putting the lifting supports in contact with the hull, is then lifted thus loading the boat, which is laid to the ground again in the desired position with the same procedure without using a tow truck.
|
|
Photo: Self-Propelled Trailer 120 M.T. capacity
These trailers are the best solution in order to exploit the spaces in shipyards as well as in the marinas, since they allow to place the boats very near with each other, which is impossible with Boat-Hoists and rather difficult and dangerous with traditional tow trucks. The operational principle is extremely simple: the trailer, having a U-shape in low position, is placed under the boat and, after putting the lifting supports in contact with the hull, is then lifted thus loading the boat, which is laid to the ground again in the desired position with the same procedure without using a tow truck.
|
|
|
The outstanding Handling, Speed and Safety characteristics of Ascom's products represent an international benchmark for the Boat Hoists industry and the extremely high level of Quality and Technology represent a point of reference for other manufacturers in this sector
|
|
Photo: Amphibious Tower Trailer 15 M.T. capacity
Amphibian towed trailer, equipped with an Open/Closed hydraulic system already described. All movements are hydraulically controlled. It only needs a normal tractor for towing and feeding the necessary hydraulic power to the trailer system.
|
|
Adjustable inside clear width feature as standard
Allows the hoist to have a duplicate role of both recovery/launch and boat parking function
Stainless steel piping, hydraulic couplings and fittings to 316 Marine Standard
Stainless steel shafts throughout
Anti-flip hitch to prevent vertical jack-knifing
Can be supplied to suit a variety of towing vehicles
|
|
Photo: Self-Propelled Trailer 150 M.T. capacity
These trailers are the best solution in order to exploit the spaces in shipyards as well as in the marinas, since they allow to place the boats very near with each other, which is impossible with Boat-Hoists and rather difficult and dangerous with traditional tow trucks. The operational principle is extremely simple: the trailer, having a U-shape in low position, is placed under the boat and, after putting the lifting supports in contact with the hull, is then lifted thus loading the boat, which is laid to the ground again in the desired position with the same procedure without using a tow truck.
|
|
Photo: Self-Propelled Trailer 300 M.T. capacity
These trailers are the best solution in order to exploit the spaces in shipyards as well as in the marinas, since they allow to place the boats very near with each other, which is impossible with Boat-Hoists and rather difficult and dangerous with traditional tow trucks. The operational principle is extremely simple: the trailer, having a U-shape in low position, is placed under the boat and, after putting the lifting supports in contact with the hull, is then lifted thus loading the boat, which is laid to the ground again in the desired position with the same procedure without using a tow truck.
|
|
Photo: Self-Propelled Trailer 200 M.T. capacity
These trailers are the best solution in order to exploit the spaces in shipyards as well as in the marinas, since they allow to place the boats very near with each other, which is impossible with Boat-Hoists and rather difficult and dangerous with traditional tow trucks. The operational principle is extremely simple: the trailer, having a U-shape in low position, is placed under the boat and, after putting the lifting supports in contact with the hull, is then lifted thus loading the boat, which is laid to the ground again in the desired position with the same procedure without using a tow truck.
|
|
These trailers normally have more compact dimensions, since the Diesel engine is located side of the spar, not in the front part as it is in the units of the range 80-300 ton.
|
|
Photo: Self-Propelled Trailer 200 M.T. capacity
These trailers are the best solution in order to exploit the spaces in shipyards as well as in the marinas, since they allow to place the boats very near with each other, which is impossible with Boat-Hoists and rather difficult and dangerous with traditional tow trucks. The operational principle is extremely simple: the trailer, having a U-shape in low position, is placed under the boat and, after putting the lifting supports in contact with the hull, is then lifted thus loading the boat, which is laid to the ground again in the desired position with the same procedure without using a tow truck.
|
|
|
To park more boats and to reduce labour costs, Roodberg offers a variation of remote controlled boat parkers. Ask the Roodberg specialist for the available capacities.
|
|
Remote controlled operation of all functions from operator-carried belly pack with back-up umbilical
Self-leveling operator’s platform
Air bunks to carry boat @ approximately 10 psi (adjustable pressure)
Air cushioned fenders to center boat
Patented, articulating, center joint to launch boat in shallow tides
Hydro-static drive completely variable speed
Operates on boat ramp
Strap hooks mounted on the outside of the frame to carry small boats on the bunks
Steering axles turn a full 180 degrees with Tru-trac
|
|
Remote controlled operation of all functions from operator-carried belly pack with back-up umbilical
Self-leveling, operator’s platform
Air bunks to carry boats @ approximately 10 psi (adjustable pressure)
Air cushioned fenders to center boat
Patented, articulating, center joint to launch boat in shallow tides
Hydro-static drive completely variable speed
Operates on boat ramp
Strap hooks mounted on the outside of the frame to carry small boats on the bunks
Steering axles turn a full 180 degrees with Tru-trac
|
|
Wise Handling offer a range of products designed to enable the transportation of boats from the launch/retrieval area to the boat park.
Available in lift capacities from 10TN - 200TN
Full remote wireless control of all functions
Towed versions available
|
|
|
A Marine Travelift self-propelled transporter can maximize profitability and boat handling efficiency by allowing boatyards to store boats in closer proximity, and thus virtually doubling the available yard capacity. A remote controlled transporter is designed to work in tandem with a Marine Travelift boat hoist to best utilize time and manpower, but more importantly, increase a boatyard’s revenue substantially.
|
|
|
Kleeco Carriers are hydraulic marine trailers that make boat moving and handling in storage, repair and display area a one man operation. This straddle type yard trailer raises and lowers boats hydraulically. You will handle a greater number of boats when it is used with your present hauling and launching equipment. Remote storage areas can be used effectively. There will be more productive handling of boats from Travel hoists, fixed hoists, and cranes. Door heights and buildings in general may be lower since only the height of the boat must be considered. Boats can be stored rail to rail with virtually no wasted space between them. Boats are handled safely, low to the ground with good stability from the wide track design.
|
|
|
|
|
|
|
Con-o-lift yard trailers are specifically designed for the commercial marina operator or boat storage facility requiring the ultimate in boat handling efficiency. Our yard trailers are extremely versatile, hard-working machines that can safely handle a wide range of vessel types and sizes with minimal adjustment.
These off-road trailers feature rugged steel side frames and hydraulic components, including our exclusive extended frame lift concept. This frame lift design is similar to a large forklift, with the side frames serving as the "forks" on the lift truck, while the actual contact with the hull is accomplished with large carpet-covered pads. Yard trailers are supplied standard with a pintle hitch attachment, and come complete with heavy duty industrial pneumatic tires for longevity and performance.
Con-o-lift's clean, open-frame design and hydraulic expanding-width frame allow vessels to be carried and set lower to the ground. All yard trailers are supplied standard with all fixtures and attachments necessary to handle powerboats and sailboats on cradles. For handling sailboats without cradles, our adjustable hydraulic sail arm package can be added to any yard trailer model.
Yard trailers are sandblasted after welding, and polyurethane-painted with your choice of colour. Optional hot dip galvanizing is also available on all models.
|
|
|
|
|
|
|
When it comes to superior manoeuvrability and efficient handling, there are no alternatives! Con-o-lift self-propelled marine hydraulic trailers deliver the ultimate in boat-handling convenience and performance.
Our exclusive 180 degree steering system provides unparalleled maneouvrability in tight quarters, allowing for increased vessel storage in yards where space is at a premium.
These trailers feature all the benefits of our standard yard trailers, including our clean, open-frame design concept, and hydraulic expanding-width frame, combined with our extended frame lift system for independent hydraulic height adjustment. Con-o-lift self-propelled trailers feature a full hydrostatic drive system, with dynamic braking and a multi wet-disk parking brake for added safety.
The operator's station with full engine instrumentation is mounted on the integral tractor unit at the front of the trailer. An optional hydraulic-operated raised platform can be added for greater clearance when the unit is used for launch and retrieval on ramps.
|
|
|
|
|
|
|
When it comes to superior manoeuvrability and efficient handling, there are no alternatives! Con-o-lift self-propelled marine hydraulic trailers deliver the ultimate in boat-handling convenience and performance.
Our exclusive 180 degree steering system provides unparalleled maneouvrability in tight quarters, allowing for increased vessel storage in yards where space is at a premium.
These trailers feature all the benefits of our standard yard trailers, including our clean, open-frame design concept, and hydraulic expanding-width frame, combined with our extended frame lift system for independent hydraulic height adjustment. Con-o-lift self-propelled trailers feature a full hydrostatic drive system, with dynamic braking and a multi wet-disk parking brake for added safety.
The operator's station with full engine instrumentation is mounted on the integral tractor unit at the front of the trailer. An optional hydraulic-operated raised platform can be added for greater clearance when the unit is used for launch and retrieval on ramps.
|
|
This platform for careenage PARKNET allows the shoring up and the stowing of boats in complete safety while leaving free acces to the careen for maintenance purpose
Carreenage becomes easy, quick and safe. Offering the possibility to limit water splashing, capture the washing effluents and treat them.
|
|
|
The originality of the system is based on an hydraulic semi-tracted truck allowing drying up and shoring up of a boat by only one worker, without any other system or toolkit
|
|
|
A modular concept by half cradles for outside long time storage or for workshops use, a shoring up system simple, quick, sure and tested.
|
|
|
|
|
|
|
When it comes to superior manoeuvrability and efficient handling, there are no alternatives! Con-o-lift self-propelled marine hydraulic trailers deliver the ultimate in boat-handling convenience and performance.
Our exclusive 180 degree steering system provides unparalleled maneouvrability in tight quarters, allowing for increased vessel storage in yards where space is at a premium.
These trailers feature all the benefits of our standard yard trailers, including our clean, open-frame design concept, and hydraulic expanding-width frame, combined with our extended frame lift system for independent hydraulic height adjustment. Con-o-lift self-propelled trailers feature a full hydrostatic drive system, with dynamic braking and a multi wet-disk parking brake for added safety.
The operator's station with full engine instrumentation is mounted on the integral tractor unit at the front of the trailer. An optional hydraulic-operated raised platform can be added for greater clearance when the unit is used for launch and retrieval on ramps.
|
|
|
|
