|
|
BOAT LIFT motorised trailers are designed for the fast lifting and handling of crafts and are ideal for saving time and making maximum use of the areas within shipyards, ports and marinas.
BOAT LIFT motorised trailers are equipped with a lowered engine compartment so as to reduce as much as possible the vertical space occupied and as well as guarantee a better use and positioning of boats. The engine compartment is also fitted with a covering that has the function of reducing the engine noise and preventing water penetration.
|
|
|
Non-motorised trailers can be used as an alternative to motor-driven ones when crafts need to cover long distances. Non-motorised shipyard trailers and on road trailers homologated as Public Work Vehicles for road circulation are also available
|
|
Remote controlled operation of all functions from operator-carried belly pack with back-up umbilical
Self-leveling operator’s platform
Air bunks to carry boat @ approximately 10 psi (adjustable pressure)
Air cushioned fenders to center boat
Patented, articulating, center joint to launch boat in shallow tides
Hydro-static drive completely variable speed
Operates on boat ramp
Strap hooks mounted on the outside of the frame to carry small boats on the bunks
Steering axles turn a full 180 degrees with Tru-trac
|
|
Remote controlled operation of all functions from operator-carried belly pack with back-up umbilical
Self-leveling, operator’s platform
Air bunks to carry boats @ approximately 10 psi (adjustable pressure)
Air cushioned fenders to center boat
Patented, articulating, center joint to launch boat in shallow tides
Hydro-static drive completely variable speed
Operates on boat ramp
Strap hooks mounted on the outside of the frame to carry small boats on the bunks
Steering axles turn a full 180 degrees with Tru-trac
|
|
|
|
|
|
|
Con-o-lift yard trailers are specifically designed for the commercial marina operator or boat storage facility requiring the ultimate in boat handling efficiency. Our yard trailers are extremely versatile, hard-working machines that can safely handle a wide range of vessel types and sizes with minimal adjustment.
These off-road trailers feature rugged steel side frames and hydraulic components, including our exclusive extended frame lift concept. This frame lift design is similar to a large forklift, with the side frames serving as the "forks" on the lift truck, while the actual contact with the hull is accomplished with large carpet-covered pads. Yard trailers are supplied standard with a pintle hitch attachment, and come complete with heavy duty industrial pneumatic tires for longevity and performance.
Con-o-lift's clean, open-frame design and hydraulic expanding-width frame allow vessels to be carried and set lower to the ground. All yard trailers are supplied standard with all fixtures and attachments necessary to handle powerboats and sailboats on cradles. For handling sailboats without cradles, our adjustable hydraulic sail arm package can be added to any yard trailer model.
Yard trailers are sandblasted after welding, and polyurethane-painted with your choice of colour. Optional hot dip galvanizing is also available on all models.
|
|
|
|
|
|
|
When it comes to superior manoeuvrability and efficient handling, there are no alternatives! Con-o-lift self-propelled marine hydraulic trailers deliver the ultimate in boat-handling convenience and performance.
Our exclusive 180 degree steering system provides unparalleled maneouvrability in tight quarters, allowing for increased vessel storage in yards where space is at a premium.
These trailers feature all the benefits of our standard yard trailers, including our clean, open-frame design concept, and hydraulic expanding-width frame, combined with our extended frame lift system for independent hydraulic height adjustment. Con-o-lift self-propelled trailers feature a full hydrostatic drive system, with dynamic braking and a multi wet-disk parking brake for added safety.
The operator's station with full engine instrumentation is mounted on the integral tractor unit at the front of the trailer. An optional hydraulic-operated raised platform can be added for greater clearance when the unit is used for launch and retrieval on ramps.
|
|
|
|
|
|
|
When it comes to superior manoeuvrability and efficient handling, there are no alternatives! Con-o-lift self-propelled marine hydraulic trailers deliver the ultimate in boat-handling convenience and performance.
Our exclusive 180 degree steering system provides unparalleled maneouvrability in tight quarters, allowing for increased vessel storage in yards where space is at a premium.
These trailers feature all the benefits of our standard yard trailers, including our clean, open-frame design concept, and hydraulic expanding-width frame, combined with our extended frame lift system for independent hydraulic height adjustment. Con-o-lift self-propelled trailers feature a full hydrostatic drive system, with dynamic braking and a multi wet-disk parking brake for added safety.
The operator's station with full engine instrumentation is mounted on the integral tractor unit at the front of the trailer. An optional hydraulic-operated raised platform can be added for greater clearance when the unit is used for launch and retrieval on ramps.
|
|
|
|
|
|
|
When it comes to superior manoeuvrability and efficient handling, there are no alternatives! Con-o-lift self-propelled marine hydraulic trailers deliver the ultimate in boat-handling convenience and performance.
Our exclusive 180 degree steering system provides unparalleled maneouvrability in tight quarters, allowing for increased vessel storage in yards where space is at a premium.
These trailers feature all the benefits of our standard yard trailers, including our clean, open-frame design concept, and hydraulic expanding-width frame, combined with our extended frame lift system for independent hydraulic height adjustment. Con-o-lift self-propelled trailers feature a full hydrostatic drive system, with dynamic braking and a multi wet-disk parking brake for added safety.
The operator's station with full engine instrumentation is mounted on the integral tractor unit at the front of the trailer. An optional hydraulic-operated raised platform can be added for greater clearance when the unit is used for launch and retrieval on ramps.
|
|
Remote controlled operation of all functions from operator-carried belly pack with back-up umbilical
Self-leveling, operator’s platform
Air bunks to carry boat @ approximately 10 psi (adjustable pressure)
Air cushioned fenders to center boat
Patented, articulating, center joint to launch boat in shallow tides
Hydro-static drive completely variable speed
Operates on boat ramp
Strap hooks mounted on the outside of the frame to carry small boats on the bunks
Steering axles turn a full 180 degrees with Tru-trac
|
|
|
|
|
|
|
Con-o-lift marine hydraulic highway trailers offer superior flexibility and handling efficiency for today's commercial boat haulers and marine operations. Our hydraulic trailers are very versatile, allowing the same unit to safely handle a wide range of vessel types and sizes with minimal adjustment.
These highway trailers are constructed with a clean, open-frame design , which allows boats to be carried (and set) lower to the ground than any other trailer design. Our hydraulic expanding-width frame system (standard on all trailer models YH-5XD and larger) allows even greater flexibility.
With our trailer, the hull is supported on large adjustable pads set into the side-frames of the trailer, allowing power boats to be carried without the use of awkward slug beams or cross bars to support the keel. These rugged steel side frames are equipped with Con-o-lift's exclusive extended frame lift system for independent hydraulic height adjustment. This system provides unparalleled lift range and flexibility, and allows vessels to be carried at a near-level position on the launch ramp.
|
|
|
|
|
|
|
Con-o-lift's rugged OTR trailers deliver superior performance for the discerning long-distance carrier. These premium quality trailers are specifically designed to meet the demands of the commercial, over-the-road boat-hauler, providing superior quality, performance, and corrosion resistance.
All OTR trailers are supplied with complete hot-dip galvanizing protection for maximum service life. A complete stainless steel hardware package is provided, including pivot pins, fasteners, and hydraulic shafts and fittings.
These trailers feature 22,500 lb Dexter axles, complete with Firestone air-ride suspension, and 235/75R17.5 radial tires mounted on hot dip galvanized rims. The rugged steel frame is engineered to bear the vessel weight on 6" x 6" hardwood keel beams, while electronic overrides in the air suspension system provide a frame lift range of 13" - 21" over the crossbeams.
The hull is stabilized with six fully adjustable hydraulic arms. The arms also extend (manual extension) to accommodate deep-keel sailing vessels. In addition, these trailers are designed with rotating rear arms to provide greater flexibility.
Con-o-lift OTR trailers are also equipped with hydraulic front landing gear, designed to facilitate independent operation on the launch ramp (by means of a truck-mounted winch). The trailer includes a self-contained power unit and air-supply to allow the hydraulic functions and air brakes to operate without attachment to the tow vehicle.
These trailers come standard-equipped with wireless remote control for added convenience and safety. A manual back-up control panel for all functions is also provided in a gooseneck-mounted lockable storage cabinet.
Con-o-lift OTR trailers offer a rugged, proven solution for today's commercial hauler.
|
|
At Con-o-lift, we offer proven solutions for the safe and convenient storage of all types of vessels. Our hot dip galvanized boat stands for power and sail provide the security and versatility required to meet the needs of your operation.
All Con-o-lift stands are hot dip galvanized for maximum longevity and performance.
Our rugged storage stands feature a welded steel base, combined with a threaded screw top assembly. A treated plywood pad surface is secured to the screw by means of a removable bolt with nylon friction washers, enabling the top to maintain a preset position for more convenient set-up.
Con-o-lift stands are stackable, and have been designed for convenient handling. While all models feature rugged steel construction, they remain relatively light and easy to handle.
|
|
| ... products without information |
| |
|
|
|
|
|
Con-o-lift's rugged OTR trailers deliver superior performance for the discerning long-distance carrier. These premium quality trailers are specifically designed to meet the demands of the commercial, over-the-road boat-hauler, providing superior quality, performance, and corrosion resistance.
All OTR trailers are supplied with complete hot-dip galvanizing protection for maximum service life. A complete stainless steel hardware package is provided, including pivot pins, fasteners, and hydraulic shafts and fittings.
These trailers feature 22,500 lb Dexter axles, complete with Firestone air-ride suspension, and 235/75R17.5 radial tires mounted on hot dip galvanized rims. The rugged steel frame is engineered to bear the vessel weight on 6" x 6" hardwood keel beams, while electronic overrides in the air suspension system provide a frame lift range of 13" - 21" over the crossbeams.
The hull is stabilized with six fully adjustable hydraulic arms. The arms also extend (manual extension) to accommodate deep-keel sailing vessels. In addition, these trailers are designed with rotating rear arms to provide greater flexibility.
Con-o-lift OTR trailers are also equipped with hydraulic front landing gear, designed to facilitate independent operation on the launch ramp (by means of a truck-mounted winch). The trailer includes a self-contained power unit and air-supply to allow the hydraulic functions and air brakes to operate without attachment to the tow vehicle.
These trailers come standard-equipped with wireless remote control for added convenience and safety. A manual back-up control panel for all functions is also provided in a gooseneck-mounted lockable storage cabinet.
Con-o-lift OTR trailers offer a rugged, proven solution for today's commercial hauler.
|
|
|
Con-o-lift is please to introduce HAULL.E. A highly maneuverable and rugged trailer tug that can turn on a dime and make change. One man operation with radio remote control steering, drive and hitch functions. Get your boats or trailers closer without having a long tow vehicle taking up valuable space. Turn any road or yard hydraulic boat trailer into a self-propelled workhorse for storage, service work or use it to move your regular trailers around the yard. HAULL.E can move ball hitch, pintle ring and even fifth wheel trailers. For trailers with air-brakes, HAULL.E has a built in air compressor to release the brakes. Call Con-o-lift to see how HAULL.E can make you money.
|
|
| ... products without information |
| |
| ... products without information |
| |
|
|
