|
|
Designed for the whole range of Ocean fenders.
Exceptional fender protection for long life.
The material is soft and fits perfectly.
Polyester rings on both ends.
One ring is adjustable with PVC clip and inox spring for better grip.
Always stays in place.
Customised on request.
100% soft polyester fabric UV and chafing resistant.
|
|
Single eye fender cover
Single eye fender sock Made 2 Measure to fit Anchor Marine fenders.
|
|
|
|
|
|
|
The surface of a boat is coated with a thin gel coat or paint over the glass fiber hull, which is vulnerable to abrasion. The fender protects the boat from damage during mooring and docking, but the surface of modern plastic fenders often traps grit and dirt. Constant rubbing of bare fenders on topsides can cause abrasion and significant damage to the gel coat or paint, which is both unsightly, hard to remove and costly to repair.Boat owners with painted hulls or expensive graphics especially need to prevent the damage standard fenders can cause. These delicate finishes are easy to mar, damage and expensive to repair.Made by hand, in the US from US materials, they are a particularly non-abrasive loop-knot acrylic fabric with a soft cushion effect surface,
Fenda-Sox covers fit tightly over the fender, preventing grit and dirt from becoming trapped Fenda-Sox gives you the added protection your gel coat and paintwork require, saving you time and money on expensive maintenance and repairs. The covers also stop irritating fender squeak -
|
|
|
|
|
|
|
There are cases, where for the used fenders it is not possible to find of the screened enclosures standard, or it wants a various color from proposed how much. In this case, the only solution is to manifacture of the stockings on measure working with the elastic sponge roving. The folder colors in fact is proposed on hand with various tonalities, rendering the approach of the several already existing colors gradevole on the boat.
You contact to us in order to demand a estimate accurate and aimed at your case, or in order to demand like finding the measures to us of the fenders.
Like always, and to greater reason, these accessories can be personalized with a embroidery more colors with logo of the boat and its name.
Estimates on measure, free and always without engagement from part yours.
We remember you that we realize also the plates door fenders, solitamenti used on engine Yacht of great dimension, in order to put down the same ones without having to make of the fastenings long the balconies. For greater info seeing our products of the Line Prestige
|
|
|
|
|
|
|
A new Line of products enters to make part of our catalog, been born previously, from a service rendered only upon request to some friendly customers/: the line of you cover fenders in roving, personalized and not, for your boat.
Available for the greater models of fenders in commerce, they are manifactured in roving in Polypropylene, while the stocking is introduced without some lateral seam. The same one in fact is to all the effects, a tubular stocking, rifinita with a detail arresting system (patented), of the tramatura on the two edges to its extremities. Saying system that is of elastic nature, concurs to fastly mount the stocking a lot and in sure way on any fender. The range of the stockings you cover fender, previews the screened enclosure and the adaptability in order nearly the totality of the fenders produced and therefore in commerce, (for measures and dimensions reported to the several models of fenders, to see the appropriate table comparative).
The color of tip of the product is the blue marine but the colors are available also himself with a maggiorazione of cost of 20% green and black.
All our products are entire personalizzabili to embroidery, with loghi and written, as an example bringing back the name of the boat, in nearly all the existing characters.
|
|
|
Ease of use and sturdy support is the reason EZ Loader pontoon and personal watercraft trailers are chosen by more marine consumers.
|
|
16-plaited, 10 mm, 30 m length anchor line with lead white with blue flecks
Anchor line with lead weight built into the last 10 meters, can be used without chain, especially easy to handle, very easy to stow, stainless steel thimble spliced and whipped into every 30 or 40 m length.
100% Polyester, chafe and UV-resistant, white with blue colour coding and blue/gold mark yarn. Available in ready-made blue LIROS kitbag.
Info
- usable without chain
- especially easy to handle
- very easy to stow
- available in an attractive kitbag
|
|
1:1-plaited, 8 mm ø, black
New type of highly elastic rope in a cover-core construction for mooring, anchoring and towing. Its special construction and the use of highly elastic fibres allow this line to be used in extreme situations, even without shock absorbers. Abrasion resistant 1:1 plait made from 100% Polyamide, highly elastic.
Info
- Stretch characteristics > 20%
- very easy to splice
- highly elastic
- very tensile and abrasion resistant
- very easy to handle
- by request available up to 40 mm ø
- available ready spliced
|
|
tressage 16 fuseaux, 12 mm, longueur 30 m, avec cosse plastique coupé à chaud blanc uni
Ligne de mouillage plombée sur toute la longueur pour un positionnement le plus horizontal possible par rapport à l'ancre. Très facile à mettre en oeuvre, à manipuler et à stocker. Disponible en longueurs de 30 ou 40 mètres. Terminaison avec cosse plastique coupé à chaud.
Les plus
- évite l'usage d'une chaîne
- très agréable à manipuler
- très facile à stocker
- également disponible dans un beau LIROS-Sac marin
- Confection spéciale sur demande, Longueur, couleur et diamètre au choix
|
|
3-strand, 6 mm ø, white
Traditional mooring warp which has been very popular in Scandinavia. Combining light weight and good grip with ease of handling - semi matt finish.
Info
- Stretch characteristics > 17%
- handy construction
- easy to splice
- available ready spliced
Material
- mixed construction out of Polyester worsted yarn and shiny Polyester
|
|
24-plaited, 24 mm ø, aqua-silver
LIROS Super Yacht DB is a new range of mooring and anchoring warps for Super Yachts from 70' to 200' feet in length. The cover is specially treated against the effects of abrasion using the unique LIROS impegnation system NCS. These ropes are very flexible combining high stretch and shock absorbing qualities with great handling characteristics. Available ready spliced and with leather protection around the spliced eye (1 m inner length) if required.
Info
- stretch at working load < 15%
- not kinking
- easy to handle
- special anti abrasion treatment LIROS NCS
Cover
Covered Polyester high twisted 24-plaited
Core
Polyester plaited
|
|
The experts agree: Having storm anchors aboard can make the difference between safety and disaster. The Fortress Stowaway Anchor Bag holds everything you need to deploy your Fortress or Guardian anchor quickly. No more searching for wrenches, shackles or chain. With the Stowaway system, it's "in the bag"!
The Stowaway bags are built to last in the rugged marine environment. The bag closure as well as the straps (which serve as convenient carrying handles) are high strength, extra wide Velcro™. Inside each bag are pouches to hold the correct size wrenches (included) and even a spare fluke clip, bolt and nut (also included). Easy to understand diagrams are sewn into the bag to take you through anchor assembly and bag-packing procedures.
|
|
StarnBAG is a trademark of the Sail-service Starnberg
Our new board bag range is characterized by the following points:
* New mesh extremely tear and UV resistant
* All edges are reinforced with silicone-coated tapes.
* High-quality craftsmanship!
With the novel network material, could also wet linen and other boat accessories fully dry and there is therefore no risk of mold or stain floor.
StarBAG board bags can be in any designs and shapes are manufactured by our factory production, we are also very flexible and can also custom models for your boat or produce yards.
All bags and products StarnBAG be in our own workshops on Lake Starnberg by hand.
You want even more information, send us your inquiry obligation, we are happy for you. Or visit our store at
www.sail-service-starnberg.de/shop
Sail-service Starnberg
|
|
|
AccuDock's unique rail system incorporates the long proven method of storing a boat - our rail system is much like the bunks of a boat trailer. Boat hulls are built to be supported along their length - not just pressure points that roller systems provide. Our system utilizes rollers to assist getting onto the float - but the rails support the vessel - the boat does not sit on rollers.
|
|
- Holds all the equipment needed to abandon ship in an emergency; stow in easy-access waterproof locker until necessary to use
- Floats; buoyant closed cell foam construction
- East-fit attachment for locator light (light not included)
- Internal pockets and elastic daisy chain organizer
- External pockets allow instant access to EPIRB and GPS for quick activation
- Customize with survival equipment for your sailing/boating conditions
- Record equipment inventory on external, waterproof card for quick reference
- Water resistant, rugged fabric withstands years of service; 1250 denier coated nylon exterior, 200 denier coated nylon liner with bias tape-finished main compartment seams
- Durable, self-repairing zipper
- Shoulder strap functions as tether, leaving hands free in an emergency
|
|
Isolation blanket
100 ud/carton. Manufactured in high resistant isolation tissue, preserve 90% of body heat. Useful in case of accident or rescue.
Measures: 223 x 100 cm.
|
|
Contains the essential safety equipment as follows;
- 2 x IKAROS Orange Hand Smoke
- 2 x IKAROS Red Hand Flare
- 1 x Inshore First Aid Kit
- 1 x Throwing Line (Sock type)
- 1 x Gloria 1 kg Powder Fire Extinguisher
- 3 x Green Light sticks
- 2 x Commodore Red Automatic Lifejackets
|
|
|
Designed for marine and aviation use, this waterproof and buoyant Grab Bag is perfect for holding emergency equipment.
|
|
STORAGE BAG
For foldable gangways we developed an extremely strong and eye catching silver storage bag. Your gangway will be safe of scratches even if you store it in the hold between all other nautical equipment.
|
|
|
|
|
|
|
The new hydraulic gangway Dolphin SHADE in aluminum perfectly answers to the requirements of lightness, design and adaptability demanded from the small units. It has two sections, before is adjustable until to 20° towards the high and 15° towards the low, the second section is telescopic. It is produced in five lengths (1,9 - 2,4 - 2,7 - 3 and 3,3 meters), is complete of stanchions automati to us and concurs only the access with edge for a cargo total of 150 kg.
SHADE exactly arrives a year after the restyling of the series of external gangways in aluminum - Ecodolphin, Dolphin Miniums, Dolphin and Maxi Dolphin- and of the introduction to catalog of the Twister, two rotary gangways called Mini and Maxi Twister, ciascuna in three various lengths.
All the Dolphin series carefully is planned in order to satisfy the demands for the owners of small units to sail and engine that they want to be able to approach edge with elegance and facility without to penalize the balance of the boat; their structure in aluminum is much light one and the communication trench is in teak patented anti-skid. It is possible to personalize them with echo-compatible varnishes to water.
Ecodolphin - mod 3333 (manual, from 1,50 to 2,55 m. 15-22 kg)
Miniums Dolphin - mod 3443 (to hydraulic movement, from 1,60 to 2,60 m. it raises until to 160 kg)
Dolphin - mod 3773 (to hydraulic movement, from 1,90 to 2,60 m. it raises until to 200 kg)
Maxi Dolphin - mod 3883 (to hydraulic movement, from 2,30 to 2,90 m. it raises until to 280 kg)
Miniums Dolphin Twister - mod 3453 (with rotary turret, from 2 to 2,70 m.)
Maxi Dolphin Twister - mod 3893 (with rotary turret, from 2,80 to 3,30 m.)
Dolphin Shade - mod 3793 (to passing, from 1,90 to 3,30 m.)
|
|
The perfect lift for your investment. The EZ Port by Hydro-Hoist is raising standards in the industry for functionality and durability. The framework utilizes 4" steel cross members with high-density polyethylene bushings, and a unique clamping system to ensure the lift will remain level after years of use.
Our polyethylene tanks have a lifetime warranty and are designed for minimum draft in shallow water while keeping all steel components above water when the lift is in the raised position. The EZ Port provides all the support you need to help extend the life of your boat.
|
|
- Housing made from high Tec polymer
- Unique curved design
- Low DC power consumption.
- Draws less than 1.3 amps @ 12 volts DC
- Low heat emission
- Designed for in water applications
- 6 x long life high output LED’s
- No bonding required
- No corrosion (no metal under water)
- Pivot bracket for easy cleaning
- 5 metre (16.2 ft) tined underwater cable
- Available in Ultra Blue, Ultra Green and Brilliant white
- Fibre glass mounting post
- I-njection moulded class reinforced bracket
- S/S mounting pins
- 2 year warranty
- Australian designed and manufactured
|
|
|
AccuDock's Boat Lift Dock System attaches to your lift and floats stably in the water with the lift up or down.This float system provides you total access to all sides of your boat, as well as space to park another boat, jet skis or other water toys. Now you can get on and off any side of your boat - wash, wax or repair your boat and easily walk to the dock when you are done!
|
|
Make your dock even more attractive during sunny weahter with a roof system specifically designed for compatibility with our modular docks. Not only will it provide shade in summer, the 26-guage metal roof - available in a variety of colors- adds protection from the elements all year long, for boats, personal watercraft, and people who use them.
|
|
Covered Moorage: Bellingham Marine’s Unifloat® and Unideck® systems are available with a structurally designed roof system designed to protect boats and marina guests from the elements. These covered systems provide an open atmosphere under the roof while maintaining the structural strength for site-specific wind and snow loads, as engineered by Bellingham Marine. Special construction considerations are given to maintain the structural integrity of the roof and docking system.
Bellingham Marine’s covered moorage systems feature a galvanized steel framework that supports the roofing structure.
|
|
|
The Sierra Torsion 380 has a heavy duty mechanical suspension to provide the ultimate in driver comfort. The unique low-profile torsion bar suspension allows 4 inches of shock absorbing ride. The weight adjustment provides the same level ride regardless of the operator's weight, with adjustment from 110 to 275 pounds. The Torsion 380 can be combined with a 3-inch height adjust for optional flexibility, or with a static riser when a high profile option is needed. Comes with cover.
|
|
|
|
see the results for the following category : 
