|
|
Attractive fender covers with the boat name, a yacht club logo or the manufacturer logo will give an exclusive first impression, wehen your goat is entering port or guests are coming on board.
Design your new fender equipment according to your wishes!
|
|
Fender cover with your boatname and/or logo
Lettered fenders are proof of individuality and exclusiveness. What has been reserved to super yachts so far is now affordable for all owners.
Your boat name or logo can be knitted directly into the fender cover fabric (not embroidered or printed on). Thus lettering is permanent and can not get rubbed of.
|
|
Cover of defenses to the meter to cut oneself
- not of seam necessary
- retracts and is rolled up all alone at the edges
- culprit with simple scissors
- quality ratio/prices excels. Ideal for
passages of locks, in condition of fort
friction.
- very elastic, adapts well and holds
- between also in the baskets with defenses
- washable with 40°C
- 2 sizes: - Diameter 16-22 cm
- Diameter 22-30 cm
Car-rolling up edge:
Simply to cross!
No the seam
necessary!
|
|
Fendequip ‘Super Yacht’ Fendercovers
We specialise in manufacturing Fendercovers for the Super Yacht market.
All Fendercovers are manufactured from our own premium loop knit fabric, in double ply. Whether your fender is 1 meter or 7 meters we have the facilities and capability to produce a Fendercover to your specifications.
Fendercovers are available for the following inflatable fenders:
• Aere
• Avon
• Henshaw ‘Easystow’
• Mega Fend
• Nautica
• Novurania
• Ribcraft 'Rapidstow'
|
|
Single eye fender cover
Single eye fender sock Made 2 Measure to fit Anchor Marine fenders.
|
|
Fendequip 'Embroidery' Service
For that added touch of exclusivity we can even embroider your boat's name, company logo, yacht club insignia or family crest on to each Fendercover, Rope Cover, Safety Rail Cover or Guard Rail Cover.
|
|
Fendequip 'Custom Made' Fendercovers
Fendequip 'bespoke' Service: If you have non-standard size fenders on your boat then we will be pleased to custom-make your fender covers from our taylored range.
Each cover will be hand finished to your individual fender size and specification.
Available in a choice of four standard colours: Navy Blue, Royal Blue, Black and Red and we may be able to match a specific colour of your choice.
|
|
|
|
|
|
|
FENDEQUIP FENDERCOVERS AVAILABLE TO FIT ANCHOR MARINE FENDERS
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
|
|
|
|
|
AVAILABLE TO FIT THE ENTIRE POLYFORM SERIES
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order.
|
|
|
|
|
|
|
FENDEQUIP FENDERCOVERS TO FIT MAJONI FENDERS
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
|
|
|
|
|
FENDEQUIP FENDERCOVERS AVAILABLE TO FIT DAN HILL PLAST FENDERS
The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
|
|
|
|
|
The surface of a boat is coated with a thin gel coat or paint over the glass fiber hull, which is vulnerable to abrasion. The fender protects the boat from damage during mooring and docking, but the surface of modern plastic fenders often traps grit and dirt. Constant rubbing of bare fenders on topsides can cause abrasion and significant damage to the gel coat or paint, which is both unsightly, hard to remove and costly to repair.Boat owners with painted hulls or expensive graphics especially need to prevent the damage standard fenders can cause. These delicate finishes are easy to mar, damage and expensive to repair.Made by hand, in the US from US materials, they are a particularly non-abrasive loop-knot acrylic fabric with a soft cushion effect surface,
Fenda-Sox covers fit tightly over the fender, preventing grit and dirt from becoming trapped Fenda-Sox gives you the added protection your gel coat and paintwork require, saving you time and money on expensive maintenance and repairs. The covers also stop irritating fender squeak -
|
|
| ... products without information |
| |
|
With ever more efficient cargo working in port being the objective, modern dry cargo vessels are tending to develop to a more ‘open’ trend, i.e. the size of the hatches compared with the deck area is growing. This implies that there is less stowage space available for the hatch covers, which has made the high-stowing hydraulic folding covers very popular.
|
|
|
We have a wide range of basic hatch cover designs, which includes both hydraulic and non-hydraulic operated covers. These items include pontoon, hinged, folding, side rolling, and simple pull covers for weather decks as well as multi-stacking, folding, and sliding covers for tween decks.
|
|
|
We have a wide range of basic hatch cover designs, which includes both hydraulic and non-hydraulic operated covers. These items include pontoon, hinged, folding, side rolling, and simple pull covers for weather decks as well as multi-stacking, folding, and sliding covers for tween decks.
|
|
|
Single-panel types comprise one cover for each opening i.e. there are no joints. They are normally specified for bulk carriers in the case of single-opening abreast, and for cellular container ships in the case of multi-opening abreast configurations.
|
|
|
Piggy-back hatch covers are used on bulk carriers when the available deck space is insufficient to accommodate folding, side-rolling or end-rolling covers.
|
|
|
Side-rolling and end-rolling hatch covers are popular for use on the weatherdecks of larger bulk carriers such as Panamax and Capesize types. In the case of ore/bulk/oil (OBO’s) and ore/oil carriers, the covers are designed to sustain internal liquid loads.
|
|
FIX RoRo is a lashing cover for 20 feet RORO casettes, flats and bollsters.
Lashing capacity LC 2500daN, means breaking strength 5000 daN (50 kN). The patented lashing cover is made of woven polypropylene, coated with polyethylene. The materials chosen have excellent protection against UV-light, chemicals and abrasion. Practical experiences prove long life time from hot conditions in the Middle-East to freezing winds in Gulf of Bothnia.
Reinforcements are placed at every 1,3m in length to fit perfectly to common size paper coils and also pallet goods. Both ends are reinforced and there are extra material to cover the load over the corners.
Lenght of lashing lines can be chosen according to load height. Please take contact for additional information, custom sizes and options available.
|
|
FIX RoRo is a lashing cover for 30 feet RORO casettes, flats and bollsters.
Lashing capacity LC 2500daN, means breaking strength 5000 daN (50 kN). The patented lashing cover is made of woven polypropylene, coated with polyethylene. The materials chosen have excellent protection against UV-light, chemicals and abrasion. Practical experiences prove long life time from hot conditions in the Middle-East to freezing winds in Gulf of Bothnia.
Reinforcements are placed at every 1,3m in length to fit perfectly to common size paper coils and also pallet goods. Both ends are reinforced and there are extra material to cover the load over the corners.
Lenght of lashing lines can be chosen according to load height. Please take contact for additional information, custom sizes and options available.
|
|
FIX RoRo is a lashing cover for 40 feet RORO casettes, flats and bollsters.
Lashing capacity LC 2500daN, means breaking strength 5000 daN (50 kN). The patented lashing cover is made of woven polypropylene, coated with polyethylene. The materials chosen have excellent protection against UV-light, chemicals and abrasion. Practical experiences prove long life time from hot conditions in the Middle-East to freezing winds in Gulf of Bothnia.
Reinforcements are placed at every 1,3m in length to fit perfectly to common size paper coils and also pallet goods. Both ends are reinforced and there are extra material to cover the load over the corners.
Lenght of lashing lines can be chosen according to load height. Please take contact for additional information, custom sizes and options available.
|
|
FIX RoRo is a lashing cover for 45 feet RORO casettes, flats and bollsters.
Lashing capacity LC 2500daN, means breaking strength 5000 daN (50 kN). The patented lashing cover is made of woven polypropylene, coated with polyethylene. The materials chosen have excellent protection against UV-light, chemicals and abrasion. Practical experiences prove long life time from hot conditions in the Middle-East to freezing winds in Gulf of Bothnia.
Reinforcements are placed at every 1,3m in length to fit perfectly to common size paper coils and also pallet goods. Both ends are reinforced and there are extra material to cover the load over the corners.
Lenght of lashing lines can be chosen according to load height. Please take contact for additional information, custom sizes and options available.
|
|
|
|
see the results for the following category : 
