|
|
Attractive fender covers with the boat name, a yacht club logo or the manufacturer logo will give an exclusive first impression, wehen your goat is entering port or guests are coming on board.
Design your new fender equipment according to your wishes!
|
|
Fender cover with your boatname and/or logo
Lettered fenders are proof of individuality and exclusiveness. What has been reserved to super yachts so far is now affordable for all owners.
Your boat name or logo can be knitted directly into the fender cover fabric (not embroidered or printed on). Thus lettering is permanent and can not get rubbed of.
|
|
Cover of defenses to the meter to cut oneself
- not of seam necessary
- retracts and is rolled up all alone at the edges
- culprit with simple scissors
- quality ratio/prices excels. Ideal for
passages of locks, in condition of fort
friction.
- very elastic, adapts well and holds
- between also in the baskets with defenses
- washable with 40°C
- 2 sizes: - Diameter 16-22 cm
- Diameter 22-30 cm
Car-rolling up edge:
Simply to cross!
No the seam
necessary!
|
|
Fendequip ‘Super Yacht’ Fendercovers
We specialise in manufacturing Fendercovers for the Super Yacht market.
All Fendercovers are manufactured from our own premium loop knit fabric, in double ply. Whether your fender is 1 meter or 7 meters we have the facilities and capability to produce a Fendercover to your specifications.
Fendercovers are available for the following inflatable fenders:
• Aere
• Avon
• Henshaw ‘Easystow’
• Mega Fend
• Nautica
• Novurania
• Ribcraft 'Rapidstow'
|
|
Single eye fender cover
Single eye fender sock Made 2 Measure to fit Anchor Marine fenders.
|
|
Fendequip 'Embroidery' Service
For that added touch of exclusivity we can even embroider your boat's name, company logo, yacht club insignia or family crest on to each Fendercover, Rope Cover, Safety Rail Cover or Guard Rail Cover.
|
|
Fendequip 'Custom Made' Fendercovers
Fendequip 'bespoke' Service: If you have non-standard size fenders on your boat then we will be pleased to custom-make your fender covers from our taylored range.
Each cover will be hand finished to your individual fender size and specification.
Available in a choice of four standard colours: Navy Blue, Royal Blue, Black and Red and we may be able to match a specific colour of your choice.
|
|
|
|
|
|
|
FENDEQUIP FENDERCOVERS TO FIT MAJONI FENDERS
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
|
|
|
|
|
FENDEQUIP FENDERCOVERS AVAILABLE TO FIT DAN HILL PLAST FENDERS
The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
|
|
|
|
|
FENDEQUIP FENDERCOVERS AVAILABLE TO FIT ANCHOR MARINE FENDERS
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
|
|
|
|
|
AVAILABLE TO FIT THE ENTIRE POLYFORM SERIES
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order.
|
|
|
|
|
|
|
The surface of a boat is coated with a thin gel coat or paint over the glass fiber hull, which is vulnerable to abrasion. The fender protects the boat from damage during mooring and docking, but the surface of modern plastic fenders often traps grit and dirt. Constant rubbing of bare fenders on topsides can cause abrasion and significant damage to the gel coat or paint, which is both unsightly, hard to remove and costly to repair.Boat owners with painted hulls or expensive graphics especially need to prevent the damage standard fenders can cause. These delicate finishes are easy to mar, damage and expensive to repair.Made by hand, in the US from US materials, they are a particularly non-abrasive loop-knot acrylic fabric with a soft cushion effect surface,
Fenda-Sox covers fit tightly over the fender, preventing grit and dirt from becoming trapped Fenda-Sox gives you the added protection your gel coat and paintwork require, saving you time and money on expensive maintenance and repairs. The covers also stop irritating fender squeak -
|
|
| ... products without information |
| |
Panel mount AutoAnchors. The AA560 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Windlass control and monitoring from the helm.
Large LCD display with adjustable backlighting shows length of anchor rode deployed. Display in feet or metres.
One-touch automatic function deploys and retrieves a preset length of anchor rode.
Vessel is protected during anchor retrieval by preset windlass stopping point and docking alarm.
Safety lock protects windlass from accidental deployment.
Measurements and settings are saved on exit or if the battery fails.
Straightforward installation and set up with pre-programmed calibrations for rope/chain rodes.
Inbuilt diagnostics for troubleshooting installation issues.
Install up to two units or combine with the AA150 or AA601 for multiple stations.
Console available in black or grey.
Cover for weather protection.
|
|
This new AutoAnchor offers all the well known features of the original AutoAnchor chain counters and windlass control systems plus several new innovations, including bow and stern thruster control, deck light control plus anchor wash control.
The AA710 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Full windlass control and chain counting from anywhere on the boat with the hand held wireless remote.
Controls bow and stern thrusters independently and together.
Features a preset stopping point on retrieval.
Easy-to-operate remote has a graphic LCD screen with an intuitive user interface.
Rode count, signal strength, battery level and windlass speed and direction are shown on the backlit display.
|
|
All the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.
- High level wireless transmission security - 2.4GHz ISM band
- Hand held controller displays rode count plus signal strength and battery level
- Ergonomic shape with wrist strap connector
- Water resistant to IP65
- Rubber cover moulding for grip and non slip protection
- Console holder and protective cover
- Shockproof
- IEEE 802.15.4 compliant
|
|
The Control Box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and/or pierce the container, as all the terminals and the panel for the electrical connections are perfectly accessible from the outside.
Outer construction in self-extinguishing polyester resin, resistant to shock and marine corrosion. Degree of protection IP 56 - protection against deckwater.
|
|
This new remote control model LIBERTY has an elegant and functional design. The soft rubber case, which covers sideways the remote control, allows a safe and handy taking under any condition.
LIBERTY is completely waterproof and supplied with waterproof plug and socket (IP68) of the finest quality.
The extending flexible cable (approximately 4 metres) gives the maximum freedom on board during anchoring manoeuvring.
|
|
The experts agree: Having storm anchors aboard can make the difference between safety and disaster. The Fortress Stowaway Anchor Bag holds everything you need to deploy your Fortress or Guardian anchor quickly. No more searching for wrenches, shackles or chain. With the Stowaway system, it's "in the bag"!
The Stowaway bags are built to last in the rugged marine environment. The bag closure as well as the straps (which serve as convenient carrying handles) are high strength, extra wide Velcro™. Inside each bag are pouches to hold the correct size wrenches (included) and even a spare fluke clip, bolt and nut (also included). Easy to understand diagrams are sewn into the bag to take you through anchor assembly and bag-packing procedures.
|
|
Wireless remote control:
With a radio control installed you will have full control of windlass operation where ever you are on board. The control consists of a transmitter and a receiver. With the AutomaticDownTM function the windlass will run automatically for 25 seconds before stopping. To enable the AutomaticDownTM just press the DOWN button on the receiver. To stop the AutomaticDownTM at any time, press DOWN once on the receiver.
|
|
|
To operate your windlass safely in all weather conditions you need top quality switch gear that can stand the roughness of the sea. Anchorlift uses only the best of materials to ensure you a sae and long service life of your equipment.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
