|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
VERY LOW RECESS
MULTIVOLTAGE DRIVER ON BOARD
LIGHTING DETAILS:
PowerLED Warm White 3000°k or Natural White 3700°k
Cri: 93%
40 Lumen
Lighting Beam: 25°
ELECTRICAL DETAILS:
PowerLED 3W@10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
ELECTRICAL DETAILS:
PowerLED 10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
170 Lumen
Lighting Beam: 50°
ELECTRICAL DETAILS:
PowerLED 6W@10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct light, suitable for any environment.
Antidazzling built-inrefl ector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
ELECTRICAL DETAILS:
PowerLED 10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k or Natural White 3700°k
Cri: 97%
250 Lumen
Lighting Beam: 40°
ELECTRICAL DETAILS:
PowerLED 12W@20-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
STRIP LED
IP67 watertight strip led lighting
For system to 12 V and 24 V
Operating voltage: 10-15 Vdc e 20-30 Vdc
Power consumption: 4,8 W e 4,8 W
Light colors:
Warm white
Blue
Length available: 1 m /2,5 m / 5 m
IP67
|
|
Waterproof Flexible Led Stripes 12V
PVC Flexible Led Stripes, for external use, hight power, low consumption,
Slim Shape, you can even walk on it, available in Red, Yellow, Blue, Green, Orange, White, Warm White or RGB
Featured Waterproof IP65 or IP68
We are looking for distributors / dealers for free Zones.
|
|
BIDIRECTIONAL DECORATIVE LIGHT
L.E.D. mini spot emitting a concentrated light equipped with circuit on board for signalling and interiors and exteriors courtesy applications.
Antidazzling built-in reflector
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
ELECTRICAL DETAILS:
PowerLED 3W@10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Andros - Indirect Courtesy / Accent Light
This line of Lumitec's accent/courtesy lights are compact, attractive, surprisingly bright . Choose white, red, or blue light output to illuminate counters, stairs, companionways. Completely sealed and IP67 compliant, these lights are also suitable for cockpits, hardtops, or illuminating helm stations. 30mA @ 12VDC.
|
|
|
Where can you use a light that is attractive, bright, small, completely sealed, withstands the elements yet blends with well appointed interiors? Well, anywhere. Lumitec’s “Anywhere Light” is the high intensity surface mount light that you don’t have to hide. Quality aluminum housing with Type II anodizing for an appealing satin look that will stand up to the elements. Completely sealed, IP67 compliant. 90mA @ 12VDC.
|
|
|
This line of Lumitec's accent/courtesy lights are compact, attractive, surprisingly bright . Choose white, red, or blue light output to illuminate counters, stairs, companionways. Completely sealed and IP67 compliant, these lights are also suitable for cockpits, hardtops, or illuminating helm stations. 30mA @ 12VDC.
|
|
Exuma - Coutesy / Accent Light
This line of Lumitec's accent/courtesy lights are compact, attractive, surprisingly bright . Choose white, red, or blue light output to illuminate counters, stairs, companionways. Completely sealed and IP67 compliant, these lights are also suitable for cockpits, hardtops, or illuminating helm stations. 30mA @ 12VDC.
|
|
|
With this novelty YACHTLITE exclusively realises a pressing request from shipyards, designers, outfitters and ship owners, who have long been searching for a homogeneous interior and exterior illumination. The goal – avoiding undesired LED light-spot reflections in glossy surfaces – accomplishes YACHTLITE with “FormLite”. Consequently replacing the customarily distributed light ropes used for illuminating top class furnishings.
|
|
|
Lumitec's new Flush Mount Down Lights set a new standard in overhead lighting. The luminaires feature weatherproof construction suitable for interior or exterior installations, a shallow-depth profile (less than ½" below mounting surface) and an easy to install mounting system. Ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. The lights are fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and four-color control without external control modules or specialized switches. This allows boat owners to use any existing "on-off" switches and eliminates the need for multiple wire runs necessary for other multi-colored lights. Light output options include 4-color (white/red/blue/purple), red/white with dimming, blue/white with dimming and white only. 10 to 30VDC, draws 220mA @ 12V, 110mA @ 24V.
|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
170 Lumen
Lighting Beam: 50°
ELECTRICAL DETAILS:
PowerLED 6W@10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
140 Lumen
Lighting Beam: 40°
ELECTRICAL DETAILS:
PowerLED 6W@10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
|
Lumitec’s new flush mount down lights set a new standard in overhead lighting. The luminaires feature weatherproof construction suitable for interior or exterior installations, a shallow-depth profile (less than ½” below mounting surface), and an easy to install mounting system. Ideal for salons and staterooms, as well as helm stations, flybridges and hard tops, the lights are fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and four-color control without external control modules or specialized switches. This allows boat owners to use any existing “on-off” switches and eliminates the need for multiple wire runs for multi-colored lights. Light output options include 4-color (white/red/blue/purple), red / white with dimming, blue/white with dimming, and white only. 10 to 30VDC, draws 220mA @ 12V, 110mA @ 24V.
|
|
Powerful recessed spotlights with reduced dimensions. They consist of an airtight lamp available either in white light (hot or cold) or RGB (colour-changer), on which to attach fittings that comes in various solutions that can also be custom designed on request.
Internal electronics with a power supply of 10 to 30 Vdc.
|
|
|
Versatile General Area Illumination Lights offer unprecedented flexibility. Like Lumitec’s Flush Mount Down Lights these luminaires are suitable for interior or exterior use, and come in 4 light output options. Compact, attractive and fully positionable, the lights shine a wide, even neutral-warm white beam, or choose colored light to suite your mood. Great for illuminating entertainment and living spaces, especially where conventional overhead lighting just isn’t possible. Intelligent circuitry enables advanced features like dimming and four-color control without external control modules or specialized switches. This allows builders to use existing SPST switches and eliminates the need for multiple wire runs for multi-colored lights. Light output options include 4-color (white/red/blue/purple), red / white with dimming, blue/white with dimming, and white only. Fully sealed, IP67 compliant for interior or exterior use. 10 to 30VDC, draws 220mA @ 12V, 110mA @ 24V.
|
|
|
Lumitec marries designer styling with rugged outdoor construction to offer their line of High Intensity Task/Cockpit Lights. The luminaires leverage Lumitec’s proprietary light engine technology, used in their high powered flood lights, to offer extreme brightness in a small package. Mounted for reading, tasks, or chart tables, users will appreciate the attractive designs and bright clean light. Used to illuminate cockpits and decks, the bright wide beam, waterproof construction, and weatherproof materials shine through. The proprietary mounting system offers full articulation, no metal to metal contact, and no exposed fasteners. 10 to 30VDC, draws 285mA @ 12V, 170mA @ 24V.
|
|
|
Replace dated dome lights or bulky, awkward fluorescents with the Lumitec Rail Light or Mini Rail. All lights are USCG approved for engine room use (certified intrinsically safe). Completely sealed and IP 67 compliant, the lights are ideal wherever a bright, even light is needed from a small, attractive, efficient package. The innovative design mounts easily to flat or curved surfaces (eg T-top tubes). This potent light even outperforms LED and fluorescent lights 5 times its size. 400mA @ 12VDC. Available in multi-color and mini size.
|
|
IP65 Halogen walkover light
Suitable for use in pathways, decking and soffits, etc.
Plastic mounting sleeve included for floor mounting
Lamp seated on spring for easy removal
Fitted with 0.5m of rubber cable
N.B. Cut-out dimension given is without mounting sleeve. Cut-out dimension when used with the mounting sleeve is 72mm
|
|
IP65 Halogen walkover light
Suitable for use in pathways, decking and soffits, etc.
Natural anodised aluminium finish
Multiple lamp options available
Plastic mounting sleeve included for floor mounting
Lamp seated on spring for easy removal
Fitted with 0.5m of rubber cable
LED lamps recommended due to cool operating temperature
AU-WU691/50 supplied with both MR16 and GU10 lampholders
N.B. Cut-out dimension shown is without mounting sleeve. Cut-out dimension when used with the mounting sleeve is 40mm
|
|
Recessed spotlights fitted with power-LEDs from 1.0 to 2.5W. Similar to the Minispots, they have an airtight body on which to attach a wide array of fittings.
The remarkable lighting intensity distributed at a 70° emission angle makes them ideal for lighting small areas or specific internal and external zones.
Also in this case the fitting can be custom designed. Internal electronics with a power supply from 10 to 30 Vdc.
|
|
Scout to be fixed on the boom, the bimini...
to light the COKPIT or the kitchen, the bathroom...
100% waterproof
Can be embedded in the lower track of the Boom, "flush"
6 led 1 hot Watt ultralumineuses bland
equivalent with a spotlight of 50-55 W traditional
consumption 8 W
food VARIVOLT 10 to 30 volt
7 m of cable and tight catch m/l
Dimensions:
Width: 29,40 mm
Width left to embed: 15,95 mm
Length: 235 mm
Height: 11 mm
|
|
The Single LED Eyeball (Ref. S40154-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B).
The front bezel is IP 68 and the rear part of the lamp is IP 44.
The eyeball of the LED can be adjustable.
One Driver (S41104) is required to power seven Single 1 watt LED eyeballs.
|
|
The Fixed-Single 1 watt LED (Ref. S40211-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B)
The front bezel is IP 68 and the rear part of the lamp is IP 44.
One Driver (S41104) is required to power seven Single 1 watt LED’s.
|
|
The Fixed-Single 1 watt LED (60mm) (Ref. S40252-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B).
The front bezel is IP 68 and the rear part of the lamp is IP 44. Bezel diameter 60mm
One Driver (S41104) is required to power seven Fixed-Single 1 watt LED’s.
|
|
The Small Single LED Eyeball (Ref S40201-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C) and red (R), green (G) and blue (B).
The eyeball of the LED is adjustable.
One driver (S41104) is required to power a minimum of four and a maximum of seven 1 watt LED eyeballs.
|
|
SCOUT OF BOOM 4 LED 1w WARM WHITE, VARI, (angle 120°), 7 m cable 85,00 EUR (557,56 FF)
Scout to be fixed on the boom, the bimini...
to light the COKPIT or the kitchen, the bathroom...
100% waterproof
Can be embedded in the lower track of the Boom, "flush"
4 led 1 hot Watt ultralumineuses bland
equivalent with a spotlight of 30-35 W traditional
consumption 6 W
food VARIVOLT 10 to 30 volt
7 m of cable and tight catch m/l
Dimensions:
Width: 29,40 mm
Width left to embed: 15,95 mm
Length: 235 mm
Height: 11 mm
Reference: 04BOOM 4 VARI
|
|
|
|
