|
|
model 3070 "my DOG"
"my DOG" was developed to satisfying increasing customer requests for a light and compact accessory that is easy to install on the stern platform. The crane is constructed in varnished AISI 316 stainless steel with a fibreglass fairing and is composed of four sections: two swivel sections (the first folds closed over the other) and two telescopic elements. Two versions are available with standard 359° rotation and a winch capable of lifting 300 kg (upgradable to 400 or 500 kg upon request).
|
|
model 3120
With fixed or mobile hoist
Telescopic ceiling crane for installation inside the garage constructed in polished AISI 316 stainless steel. In addition to the version with a fixed hoist, a customized travelling hoist may be requested. Both have a standard load capacity of 800 lbs or an optional load capacity of 1100 lbs.
|
|
model 3051
Lifts up to 500 kg
Varnished telescopic slewing crane ideal for box or garage installation on small - medium size boats. This model features standard 90° clockwiserotation powered by a hydraulic cylinder, which can be upgraded upon request to 359° rotation powered by a rotary actuator and is available in four lengths (from 3 to 4,5 metres) with a standard lifting capacity of 300 kg (500 optional).
|
|
model 3060 GALACTICA
Maximum reach of 256 inches with a load capacity of up to 2500 kg
Telescopic flybridge slewing crane ideal for super-yachts featuring a fibreglass fairing that encompasses the power units at the base. The arm can be extended to over 7 metres with a load capacity ranging from a standard 2.000 kg to top-of-the-range 2.500 kg. A varnished version without the fibreglass fairing is also available (model 3061).
|
|
"COMMODORE LINE"
telescopic davit with hydraulic rotation, raising, arm extension and cable rolling for charge lifting. Powder coated stainless steel
structure. Complete with hydraulic power unit.
|
|
Davit G 326 “MAGIC”
Telescopic with hydraulic movement of the raise, rotation and partial extension of the arm. Prolongation of the arm by manually extendable telescopic tubes. structure in stainless steel with NCL casing. Complete with hydraulic power pack and ergonomic cable remote control.
|
|
|
The FreedomLift® is manufactured with the finest quality parts - strong, lightweight marine-grade alloy and stainless steel hardware, a premium Hydraulic Power Unit system with environmentally safe fluid, and wireless remote (waterproof) control operation. The two hydraulic lift assemblies are interconnected by a structural cross member assembly, ensuring the integrity of the lift and providing smooth, uniform movement of both Arms despite any uneven weight distribution of your tender. And, the system is installed by the marina or yard of your choice!
|
|
- Realized in massive stainless steel 316 L polished
"Girofix" is easy to install(settle) on all the boats, it presents the advantage to obtain the wished direction(management) whatever is the slope of the back picture(board) to adapt: Bossoirs MPI, arceau MPI, carries(wears) bottles dive MPI, stand for fishing rod MPI, etc....
|
|
|
Simpson Davits and have been developing products to improve on the traditional davit for many years. The lastest result is the new Series 8 Davit, improving the well proven design of the established Series 7 Davit, with an improved gearbox assembly and different finishing options.
|
|
Nautical Structures’ Hydraulic davit system represent the current state of the art in tender-handling equipment. Compare the features of our davit against any other and you will find the performance and value of this equipment unsurpassed.
The davit features a generous ten-and-a-half-foot boom, capable of being loaded to its full safe working load capacity in any position without restriction. Operational safety is the prime focus in our engineered design. Virtually silent-operating, our Hydraulic Linear Winch, a totally non-fouling winch system reflects the innovation and inherent safe operating characteristics built into our davit system.
|
|
Models 100, 125, 150, 175, 200, 225, 250
Traditional Davits have been designed to lift or lower weights up to 250kg (550lbs) per pair. They are manually operated, and incorporate an adjustable sliding arm extension for final positioning of the raised dinghy or tender.
Standard base allows for the easy access of the securing bolts and can be used in conjunction with transom brackets or deck shoes, which makes for the easy removal of the davits for stowage.
|
|
Nautical Structures’ Mini-Crane Davit System feature the most recent advances in small davit technology in a davit system produced for over ten years. Proven to be the best selling and most reliable davit available today.
The Mini-Crane‘s sleek low-profile styling and strong lines disguises its flexible utility. The Mini-Crane Davit System is capable of lifting 800 pounds, sufficient for small hard-bottomed inflatable boats and most personal watercraft. A 600 pound capacity model is also available.
|
|
| ... products without information |
| |
| ... products without information |
| |
The product-group of winches represent a full scalar of winches suitable for incorporating in your davit system.
The winches can be supplied with a smooth single drum, a single two section drum or two drums (one on either side) and are, as standard, designed to meet the speeds and loads resulting from double-falls reeving.
The winches are normaly deck-mounted and are full accordance with the present SOLAS-rules
|
|
The product-group of winches represent a full scalar of winches suitable for incorporating in your davit system.
The winches can be supplied with a smooth single drum, a single two section drum or two drums (one on either side) and are, as standard, designed to meet the speeds and loads resulting from double-falls reeving.
The winches are normaly deck-mounted and are full accordance with the present SOLAS-rules
|
|
|
FERRI salvage winches are designed and manufactured in accordance with the SOLAS regulations and the Community Directive “Maritime Equipment Directive” 2002/75/EC. Provisions and accommodation ladders winches are in accordance with ISO and DIN standards.
|
|
Duarry liferafts approved according to SOLAS 74 chapter III and amendments and according to the European Directive for Marine Equipment. Created With the latest innovations in design combined with more than 40 years of wherever your ship operates.
The Duarry quality assurance system is approved by Bureau Veritas according to ISO 9001
|
|
Duarry liferafts approved according to SOLAS 74 chapter III and amendments and according to the European Directive for Marine Equipment. Created With the latest innovations in design combined with more than 40 years of wherever your ship operates.
The Duarry quality assurance system is approved by Bureau Veritas according to ISO 9001
|
|
VIKING davit-launched liferafts can be used for evacuation on their own, or in combination with mass evacuation systems (MES)
Davit-launched liferafts are ideal supplements to slide and chute systems, providing safe evacuation for those unable to descend chutes or slides due to injury, disability or size.
They can be launched from almost any type of vessel, regardless of deck height or hull shape.
Standard davit-launched liferafts are available in sizes:
12, 16, 20, 25 and 35
|
|
VIKING davit-launched liferafts can be used for evacuation on their own, or in combination with mass evacuation systems (MES)
Davit-launched liferafts are ideal supplements to slide and chute systems, providing safe evacuation for those unable to descend chutes or slides due to injury, disability or size.
They can be launched from almost any type of vessel, regardless of deck height or hull shape.
Self-righting davit-launched liferafts are available in sizes:
25, 37 and 39
|
|
|
|
see the results for the following category : 
