|
|
ELECTRO-HYDRAULIC CRADLE FOR BOATS UP TO 10 TONS, COUPLED TO THE ELECTRIC JACK FORMULA 1 SPECIALE.
TECHNICAL FEATURES:
CRADLE DIMENSIONS: Length 530 cm
Width 200 cm
4 rear wheels, 2 front feet
7 hydraulic pistons, controlled by the header of the jack Formula 1, provided with 10 pushbuttons
2 batteries, 120 Ah – motor pump, 300 bars, with 4 solenoid valves
The rear side can be opened left/right sides, enabling the cradle extraction when the boat is resting on the blocks.
The cradle is connected to the jack Formula 1 by two big pins, for the motor pump operation.
|
|
|
Our Transportable cradles are designed for boat owners who need to remove the cradle from site when not in use. These cradles are delivered on pallets to the boat yard. The longest section is 1.20m, thereby making it easier to transport off site in an estate car or hatchback. All cradles are manufactured in mild steel sections and are fully galvanised.
|
|
|
These cradles are suitable for yachts from 10m to 14m. Made from galvanised steel they are designed for use in boatyards where they can be stacked to save space when not in use.
|
|
|
Our Motor Boat Dollies have been designed as a cost-effective means of safely storing small motor boats and transporting them around a paved area or showroom without the need of a full trailer. This means that in the tight surrounds of most sales showrooms, the Motor Boat Dolly can actually save a considerable amount of space. The new Motor Boat Dolly can be easily stored when not in use and being fully galvanized, requires virtually no maintenance. A pair of Dollies will carry up to 4 tons displacement. Rubber pads are fitted to fully protect the hull.
|
|
Hydrotrans T-Cradles :
Manufactured of steel box section and fully galvanised to BS 1461, Our Hydrorans T-Cradle is available in sizes from 6 to 20 tons. This cradle can be used with any Hydrotrans boat handling trailer and can also be used in with the majority of standard 3-point-lift boat movers. In addition to being good looking, these cradles are competitively priced and of top level engineering and construction, and are sure to improve boat yard operation.
For more information, contact
Hydrotrans B.V. a Gérard Beheer Company
Hesselterlandweg 6
7942 HZ Meppel
Netherlands
www.hydrotrans.nl
Tel: +31.522.242112
Fax: +31.522.242116
|
|
* Practical and robust well-engineered design
* Strong yet simple construction
* Easily adjustable in all dimensions to suit individual hulls
* Quick, easy modular assembly with no loose bolts
* Supplied fully galvanised to BS 729
* Endorsed by marinas & boatyards
|
|
• 7,200 Pound capacity per pair
• High gloss black powder coat finish -(custom colors available upon request)
• All weather Poly Wood bunks
• Low profile - approximate 11/2" floor clearance
• Formed structural tubing
• Positive pin lock bunk adjustment cannot slip
• Bunks may be used on either side of frame
• 6" x 2" phenolic wheels bolted in all four corners
|
|
• 3,600 Pound capacity
• Constructed of 2" tubular stool
• High gloss black powder coat finish -(custom colors available upon request)
• All weather Poly Wood bunk
• Low profile 11/2" floor clearance
• Bunks may be used on either side of frame
• Casters are bolted in all four corners
• 6" x 2" phenolic wheels bolted in all four corners
|
|
• 13,000 Pound capacity per pair
• Vertical upright can lie mounted inside or outside of boat dollv frame
• High gloss black powder coat finish -(custom colors available upon request)
• Reinforced framing around vertical adjustment tubes
• Low profile - approximate 11/2' floor clearance
• 24 degree deadrise formed construction (not welded) for maximum strength
• 2" adjustable vertical upright with 2" x 6" Poly Wood bunks
• 6" x 2 1/2" phenolic wheels bolted in all four corners
|
|
* Practical and robust well-engineered design
* Strong yet simple construction
* Easily adjustable in all dimensions to suit individual hulls
* Quick, easy modular assembly with no loose bolts
* Supplied fully galvanised to BS 729
* Endorsed by marinas & boatyards
|
|
| ... products without information |
| |
ELECTRO-HYDRAULIC CRADLE FOR BOATS UP TO 10 TONS, COUPLED TO THE ELECTRIC JACK FORMULA 1 SPECIALE.
TECHNICAL FEATURES:
CRADLE DIMENSIONS: Length 530 cm
Width 200 cm
4 rear wheels, 2 front feet
7 hydraulic pistons, controlled by the header of the jack Formula 1, provided with 10 pushbuttons
2 batteries, 120 Ah – motor pump, 300 bars, with 4 solenoid valves
The rear side can be opened left/right sides, enabling the cradle extraction when the boat is resting on the blocks.
The cradle is connected to the jack Formula 1 by two big pins, for the motor pump operation.
|
|
|
Our Motor Boat Dollies have been designed as a cost-effective means of safely storing small motor boats and transporting them around a paved area or showroom without the need of a full trailer. This means that in the tight surrounds of most sales showrooms, the Motor Boat Dolly can actually save a considerable amount of space. The new Motor Boat Dolly can be easily stored when not in use and being fully galvanized, requires virtually no maintenance. A pair of Dollies will carry up to 4 tons displacement. Rubber pads are fitted to fully protect the hull.
|
|
• 7,200 Pound capacity per pair
• High gloss black powder coat finish -(custom colors available upon request)
• All weather Poly Wood bunks
• Low profile - approximate 11/2" floor clearance
• Formed structural tubing
• Positive pin lock bunk adjustment cannot slip
• Bunks may be used on either side of frame
• 6" x 2" phenolic wheels bolted in all four corners
|
|
• 3,600 Pound capacity
• Constructed of 2" tubular stool
• High gloss black powder coat finish -(custom colors available upon request)
• All weather Poly Wood bunk
• Low profile 11/2" floor clearance
• Bunks may be used on either side of frame
• Casters are bolted in all four corners
• 6" x 2" phenolic wheels bolted in all four corners
|
|
• 13,000 Pound capacity per pair
• Vertical upright can lie mounted inside or outside of boat dollv frame
• High gloss black powder coat finish -(custom colors available upon request)
• Reinforced framing around vertical adjustment tubes
• Low profile - approximate 11/2' floor clearance
• 24 degree deadrise formed construction (not welded) for maximum strength
• 2" adjustable vertical upright with 2" x 6" Poly Wood bunks
• 6" x 2 1/2" phenolic wheels bolted in all four corners
|
|
|
The cradle trailer is made by us for the cradle to transport it when it is disassembled. It facilitates easy transportation of the cradle by towing behind your car.
|
|
| ... products without information |
| |
|
|
