|
|
Mini-B compass
Specially designed for small boats (less than 9 metres / 30 ft).
The Mini-B combines exclusive attractive features:
• Good looks of a binnacle mounted compas.
• No drilling in the deck is required: the binnacle is simply secured with 3 screws.
• The compass cell can be removed instantly with one single twist, for quick storage and security.
Mini-B comes in 3 versions:
• Mini-B Olympic: for sailboats, with 3 lubber lines.
• Mini-B Offshore: for powerboats.
• Mini-B Tactical: for racing, with tactical card
|
|
|
An affordable compact-size compass for inshore use. The bracket affords numerous mounting possibilities for optimum readability.
|
|
- Easy to Read 2" Direct-Reading Dial
- Hardened Steel Pivot and Sapphire Jewel Movement
- Built-in Roller Diaphragm for Extended Temperature Operating Range
- International Safety Yellow Case
- Silicon Impact Resistant Case with Neck Lanyard
- Compact Size for Easy Handling and Storage
- QuickSight V-Notch and Lubber Line for Easy Heading Alignment
- Non-Electric Chem Sticks Provide 18 Hours of Night Lighting
- New Holder Ideal for Deck Mounting SportAbout Compasses on Small Boats
- Holder Available in Black or White
|
|
- 4 1/2" PowerDamp Plus, High-Visibility Blue Dial with Extra Large White Numerals
- Easily Installed, Fits 4.75" (12.07 cm) Mounting Hole. Click here to view a template of the mounting hole (NOTE: Be sure you print the template actual size).
- Built-in Compensators to Easily Adjust for Deviation
- Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement
- Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions
- Powerful DirectiveForce Magnets for Fast Heading Lock-on
|
|
- 2 3/4" Direct-Reading Dial
- Easily Adjustable Bracket Mount with Thumb-screws
- No-Glare Gray Finish with High-Visibility Blue Dial
- Distinctive RitchieAngler Graphics
- Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement
- Internal Green Night Lighting
- Built-in Compensators to Easily Adjust for Deviation
- Movable Sun Shield
- DirectiveForce Magnets
- 100% Repairable
- Exclusive 5-Year Ritchie Warranty
|
|
- 2 3/4" Easy to Read Direct Reading Dial
- Viewing is adjustable to 30 degrees
- Adjustable and Removable with Bracket and Thumbscrews
- Internal Green Night Illumination
( Built-in Compensators to Easily Adjust for Deviation
( Easily Installed, Fits 3" (7.62 cm) Mounting Hole. Click here to view a template of the mounting hole (NOTE: Be sure you print the template actual size).
|
|
- Choice of 2 or 5 Degree Markings
- Large 6" Dial Diameter
- Easily Installed, Fits 7 1/4" (18.42 cm) Mounting Hole. Click here to view a template of the mounting hole (NOTE: Be sure you print the template full size).
- PowerDamp Performance Dials
- 90 degree Lubber Lines for Easy Reading
- Full Internal Gimbals
- 12 Volt Green NiteVu Lighting
- Optional Night Lighting Available in 24 or 32 Volts
- Spherical Design with Fiberglass Reinforced Bowl
- High-Capacity Roller Diaphragm for Extended Temperature Operating Ranges
- 100% Repairable
- Exclusive 5-Year Ritchie Warranty
|
|
- 2 3/4" Easy to Read Direct Reading Dial
- Viewing is adjustable to 30 degrees
- Adjustable and Removable with Bracket and Thumbscrews
- Internal Green Night Illumination
- Built-in Compensators to Easily Adjust for Deviation
|
|
- 2 3/4" Easy to Read Dial
- Adjustable up to 45 degrees
- Easily Installed, Fits 2.89" (7.34 cm) Mounting Hole. Click here to view a template of the mounting hole (NOTE: Be sure you print the template actual size).
- Built-in Compensators to Easily Adjust for Deviation
|
|
- 3 3/4" PowerDamp Dial
- Special Reinforced Bracket with Quadrantal Correctors
- Hardened Steel Pivot and Sapphire Jewel Movement
- 45 Degree Lubber Lines
- Full Internal Gimbals
- Exclusive Built-in Green NiteVu Lighting
- Built-in Standard Compensators and Booster Magnets on Base
- Movable Sun Shield
- 100% Repairable
- Exclusive 5-Year Ritchie Warranty
|
|
|
Quick Drying Rentex Mesh Collar Lining, Secure Zip Fastening Internal Pocket, Laser Cut Hook and Loop External Wrist Adjusters, Non Corrosive Centre Front Zip, Two Welded Side Pocket With Non Corrosive Zips, Halyard Zip Pullers, Reflective Detailing At Back Panel, Differential Hem with Shockcord Adjustment, Mesh Lined for Increased Breathability, Articulated for Ease of Movement, Contoured To Reduce Windage.
|
|
|
Dartex Neck Seal With Non Corrosive Zip, Dartex Cuff Seals, Fast Draining Quick Access Sleeve Pocket, Fast Draining Quick Access Front Stow Pocket With Non Corrosive Zip, Neoprene Waist Band With Hook And Loop Adjustment, Unlined To Speed Up Drying Time, Reduce Weight And Reduce Inter Layer Binding, Articulated For Ease Of Movement, Contoured To Reduce Windage.
|
|
|
Ocean Hood Pod # Hi-Vis Ocean Hood With Twin Volume Adjusters # One Handed Shockcord Aperture Adjusters And Owl Vision # Quick Drying Rentex Mesh Collar Lining # Fast Draining Quick Access Stow Pockets With Water Resistant Zips # Hook and Loop External Wrist Adjusters # Internal Dartex Storm Cuff # Two Way Storm Flap With Drainage Channel # Internal Dartex Collar System # Internal Neoprene Waist Band # Fast Draining E.P.I.R.B. / Knife Pocket At Right And Left Sleeve # Secure Zip Fastening Internal Pocket # Buoyancy loops # Differential Hem With Shockcord Adjustment # Pre Moulded Reflective Patches At Cuff, Shoulder, Storm Flap And Hood # Schoeller® Keprotec® Kevlar Reinforcement With Nanosphere® SDWR # Unlined To Speed Up Drying Time, Reduce Weight And Reduce Inter Layer Binding # Articulated For Ease Of Movement # Contoured To Reduce Windage.
|
|
Jacket of coastal navigation. Fabric Dremtech+, the technicality of a fabric breathing 3 layers.
Collar adjustable neoprene + integrated hood.
Low and wrists neoprene + adjustable legs. Pocket chest VHF.
|
|
* Heat-welded seams. Out of fabric Dremtech+, the technicality of a fabric breathing 3 layers.
* Sealing interns with the collar, with system of drainage.
* Flexible collar, zip + bellows and double clutching reduction + polar collar with integrated hood.
* Reflective bands on hood, shoulders, wrists and back.
* Girdle sealing neoprene, adjustable with the size.
* 1 ventral pocket with reduction and side openings.
* Wrists with double tightening (sleeves).
* Yellow High Visibility, retractable and adjustable hood in-depth and laterally.
|
|
|
2,5 layer high-tech spray top (extremely light weight) | waterproof and breathable, W/P 10.000mm; M/P 10.000 g/sqm/24h, adjustable neoprene hem | laminated PU cuffs on sleeves and neck | chest pocket with access from top and sides | reflecive safety bands, material: 100% Nylon
|
|
|
Designed with inshore and 'round the cans' racers in mind, the MPX Race Smock is perfect for those who find themselves at the front end of the race boat. With all excess bulk removed and a stretch panel across the shoulders this smock is the perfect solution.
|
|
|
The MPX Offshore Race Smock with its double neck closure system offers even greater protection from the elements, for sailors at the front end of Offshore boats.
|
|
Impermeable technical smock and breathing 2 layers
All sealed seams - Lining high net of body
Adjustable polyurethane collar opening side on bellows
Badge EAGLE reflective with the shoulders
Reinforcements wrists
1 high pocket zippée with zip déperlant
Adjustable polyurethane wrist
Grip attaches cap - Label name and club
Low of adjustable neoprene clothing by 2 reductions
|
|
|
|
15.85 m
52' 0"
|
|
|
|
In 2005, together with Luca Brenta Design, Maxi Dolphin developed the first TP52, adopting the same construction methods as those used for America’s Cup boats, namely carbon fibre Pre-peg with a Nomex core baked at 85°C. The result is a high-tech boat made of latest-generation ultra-light materials and with features ensuring top racing performance. The Transpac 52’ today is a benchmark for top class racing boats.
|
|
|
|
17.07 m
56' 0"
|
|
|
FORMIDABLE
This Lutra designed 56’ IRC racer has achieved success on the UK racing circuit.
|
|
|
|
20.12 m
66' 0"
|
|
|
|
Judel/Vrolijk designed and Dirk Kramers engineered this IRC specific 66' lifting keel racer. It was built using hi modulus carbon pre-preg technology with Nomex & Kevlar honeycomb core. 2008 race results include all 1st place finishes at Key West Race Week, the NYYC Regatta, CORK Week & the Maxi Worlds Sardinia.
|
|
|
|
21.33 m
70' 0"
|
|
|
|
Botin & Carkeek designed Puma and SP engineered this VOR70' canting keel Volvo class racer. It was built using modulus carbon prepreg construction withKevlar honeycomb core. Puma features twin rudders, twin dagger boards and a canting keel. The boat is currently in the top three racing around the world in the Volvo Ocean Race.
|
|
|
CAM, designed by Botin Carkeek, will be campaigned by HRH Felipe, Prince of Asturias and heir to the Spanish throne, along with owners Fernando Leon and Kiko Sanchez, on the Breitling MedCup circuit.
|
|
|
This Platoon was built for the same German owner as Platoon of 2006. It is a J/V designed TP52. It was sponsored by Audi and was sailed in the 2008 season by Team Germany’s America’s Cup Team.
|
|
|
Based in the UK, Stay Calm is a Farr-designed TP52, who won her class at the 2006 Acura Miami Race Week during her first regatta.
|
|
PLATOON
A frequent sight on the MedCup circuit, this Judel/Vrolijk TP52’s home base is Germany.
|
|
|
Having begun as a part of the successful Pegasus Racing team, this Farr TP52 is now owned by Roy Disney and the Morning Light Project, which is sending the youngest team ever to participate in the 2007 Transpac race.
|
|
|
|
see the results for the following category : 
