|
|
|
12 volt submersible bilge pumps are constructed of shock resistant A.B.S. plastic, and powered by the world's best compact motor. The snap-on strainer base makes installation a simple procedure. These reliable pumps are available in four sizes from 500gph to 1000gph.
|
|
Cartridge Bilge Pumps L450 - L750 Series
L650 and L750 incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties.
For L450, L550, and L650, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve.
|
|
Ultima Bilge Pump
Sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage12 V DC.
For UltimaBilge™ 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90° smooth elbow Dura-Port and a removable check valve.
|
|
Heavy Duty Bilge Pump – L1600 - L4000 Series
Designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life.
The L2200 motor is sealed off by a mechanical seal design that eliminates shaft wear and allows for service and replacement, while the L1600 model has lipseal.
The impeller is carefully designed and tested to maximize head and flow.
The L4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1.½” or 2” ports makes for a simple installation. Removable check valve included.
|
|
Ultima Combo
Pump with automatic operation equipped with the Ultima switch. Voltage12 V DC as well as 24 V DC for L650 UC and L750 UC.
For L450 UC - L650 UC, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps will be delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve.
|
|
Rule's 700 and 750 G.P.H. Pumps offer increased capacity in keeping with it's 3/4" (19mm) discharge outlet. 12 Volts DC unless noted.
|
|
High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.
|
|
Attwood’s pumps play no "rating games" like competitive pumps. Attwood electric bilge pumps deliver value and performance that’s built to last.
|
|
Self-priming diaphragm pump with 12v or 24v DC electric motor. Flow rates up to 18.9 litres/min (5 US gallons/min)
Features:
Self-primes up to 10ft (3m) vertical lift
Runs dry without damage to the pump
Quick-connect plug-in ports for easy installation
Includes strainer, 3/4" hose barb and 3/4" garden hose ports
|
|
A very compact, powerful pump which is ideal for the hard life of working boats. This pump can lift up to 130 litres per minute (to free outlet) and is available for 12 and 24 V.
The motor has double roller bearings, and a mechanical seal virtually eliminates shaft wear. This, together with water cooling, helps to ensure many years of trouble free life with very low power consumption.
|
|
|
The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity.
|
|
|
High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.
|
|
|
Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.
|
|
|
Quality bilge pumps you can trust. SHURflo’s bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3’ Tinned Wire Assembly for above waterline installations and water cooled motors for extended life. .
|
|
Technical specifications:
Electric motor: three-phase induction motor MEC T63C4 or single-phase induction motor MEC M63C2
Power supply: 230 V / 400 V – 50 Hz depending upon the model
Power output: 0.22 kW / 0.25 kW depending upon the model
Absorbed current: 1.6 A / 1.4 A depending upon the model
Protection rating: IP 55
Condenser: 10 µF
Speed of motor rotation: 1,380 rpm / 2,800 rpm depending upon the model
Maximum pressure: 20 bar
Capacity: ranging from 5 to 22 litres / minute
Data referring to the following test fluid: oil with viscosity n =13 cSt and temperature ranging between 15°C and 20°C
|
|
| ... products without information |
| |
|
|
|
|
|
Max Power's new range of Ignition Protected tunnel thrusters is available for models CT35 to CT125. Certified ISO 8846, this range allows the safe use of an electric tunnel thruster in petrol / gas engine vessels where there may be potentially flammable gases.
IP thrusters can also be installed in habitually wet or damp areas such as sail lockers, or in the transom of deep "V" shaped motor yachts.
Designed for performance & durability, Max Power Ignition Protected thrusters offer many unique features:
•Ignition Protected, water resistant and easy to connect.
•Corrosion free composite drive legs
•Drive legs pre-filled with oil and sealed for life for zero maintenance
•Case hardened spiro-conical gears
•Line shields to protect oil seals from fishing lines and fouling
•High efficiency, purpose built DC motors
•Solid copper contact for guaranteed safe, high power connections
•Purpose built high specification DC contactors
•Electronic control boxes offering unique and unrivaled safety features
|
|
|
|
|
|
|
Launched in 2004, the Compact Retract™ is designed for yachts from 30-52'. This lightweight electric retractable thruster, the first of its kind, has been a major success with shipyards from the start. Whilst other electric retractable thrusters on the market may appear to be the same, technically they are very different.
The Max Power Compact Retract™ is the lowest profile electric retractable thruster available, allowing installation in even the most confined spaces. It also boasts the smallest hull opening on the market thanks to its unique downward movement. Furthermore, unlike some competing models, the Compact Retract™ is bolted onto a flange and not directly laminated into the hull. This means that the whole unit can be removed quickly and easily.
Other advantages also include: lightweight composite construction, rapid deployment, no exposed moving parts in the yacht, splash resistant in the yacht (thanks to its GRP casing), and intelligent position detection.
If considering an electric retractable thruster for your yacht, the Max Power Compact Retract™ is the only choice for complete peace of mind.
|
|
|
The popular 55S thruster offers the power and performance needed on most yachts from 29-38 ft loa. It features a maintenance-free, sealed gearleg for easy installation and a powerful purpose-built electric motor. Like all Side-Power thusters, the 55S2i features the patented Intelligent Power Control (IPC) for safe, reliable performance.
|
|
|
The ultra-compact 30S thruster offers the 60-85 lbs. of thrust in a package small enough to fit in boats as small as 20' loa. A sealed gearleg, high-performance prop and easy-access zincs make it a powerful and easy-to-maintain addition to any boat.
|
|
|
The 40S thruster gets every ounce of power you could want out of a 5" tunnel thruster. Side-Power's proprietary IPC system ensures safety and reliability while maintain high thrust output and low-noise operation. Customize your thruster system with our wide range of controls, remotes and other add-ons.
|
|
TRAC Thrusters deliver more thrust per horsepower than any other thruster available. TRAC's twin counter-rotating propellers are more efficient and can reach higher horsepower than single prop thrusters.
TRAC hydraulic thrusters are fitted with high efficiency piston motors. 8" thru 12" thrusters are available in a DC version and all TRAC thrusters are available in AC versions.
Thruster control is available in single or proportional speed. TRAC proportional thruster control enables precise maneuvering control.
|
|
Max Power offers a complete range of 12V/24V electric tunnel thrusters to suit motor yachts and deep footed sailing yachts from 17’-85’.
Designed for performance and durability, Max Power electric tunnel thrusters offer many unique features:
• Corrosion free composite drive legs
• Drive legs pre-filled with oil and sealed for life for zero maintenance
• Case hardened spiro-conical gears
• Line shields to protect oil seals from fishing lines and fouling
• High efficiency, purpose built DC motors
• Solid copper contact for guaranteed safe, high power connections
• Purpose built high specification DC contactors
• Electronic control boxes offering unique and unrivaled safety features
|
|
Max Power’s hydraulic tunnel thrusters are ideal for commercial and heavy displacement / high windage vessels from 40’-85’. Designed for long-term performance, these models are robust, include corrosion free components, and offer the following unique features:
•Corrosion free composite drive legs (except for the CT325 – bronze drive leg)
•Drive legs pre-filled with oil and sealed for life for zero maintenance
•Case hardened spiro-conical gears
•Line shields to protect oil seals from fishing lines and fouling
•The use of a highly reputed brand of hydraulic motors to ensure durability and serviceability
•Electronic control boxes offering unique and unrivaled safety features
|
|
This Vertically retractable thruster is ideal for sailing yachts between 45 - 70' since it keeps your hull lines clean and smooth. Its lightweight construction and ideal emersion depths means the unit can be installed far forward in the hull making it much more effective than a tunnel thruster.
Max Power's patented thrust plate transfers its lateral thrust through the hull of the yacht not from a cumbersome column.
|
|
This folding retractable thruster is designed to be compact, in order to fit under bunks and floorboards on yachts 50-200'.
The retractable movement allows it to be installed far forward in the box of the boat while reaching ideal emersion depth.
Benefitting from the patented folding arm it has a small hull opening ensuring that it never breaches the hull of the yacht. Designed for maximum buoyancy, the unit can be installed on either sailing yachts or fast motor yachts.
|
|
|
|
see the results for the following category : 
