|
|
The S1 Wheel Pilot is the successor to the popular ST4000 Plus Wheel drive system. The new S1 system uses the versatile ST6002 control head combined with the S1 SmartPilot course computer for maximum performance. Permanently installed and fully enclosed, this is a drive system that delivers the convenience and performance of an inboard autopilot. Gone are the obstructive and untidy belts and wires of conventional wheel autopilots.
The S1 Wheel pilot system is a patented solution that gives you a wheel drive that you can engage or disengage at the kick of a lever. A rear-mounted plug enables the drive unit to be detached for service or security reasons, without disturbing the wiring harness.
|
|
The ST4000T Plus is the perfect pilot for larger tiller steered yachts. The fluxgate compass is separated from the drive unit for greater accuracy, and the control unit can be mounted where it is always easy to reach.
Full SeaTalk and NMEA compatibility mean you can steer straight to a waypoint, lock on to a given wind angle, or simply set and follow a course to steer.
The large, clear display keeps you informed of what is happening, and even acts as a multi-function instrument or navaid repeater. For larger vessels and offshore cruising choose the ST4000T Grand Prix
|
|
The rugged CPT is a cost effective crew member that steers your vessel so that you can take your hands off the wheel, whether motoring or sailing. This cockpit wheel pilot is easy to install and operate.
Strong and Dependable
The CPT is constructed ruggedly for a long life in the marine environment. It uses a gimballed optical compass, capable of operating at up to 45 degrees of tilt with no loss in accuracy. The CPT sensor responds quickly and works reliably in the cockpit.
The strength of the CPT comes from the size of its motor and gearing. The robust motor of the CPT produces high torque and rpm at the wheel, allowing it to respond fast with torque to spare. Because of the speed of its motor, the CPT can handle large boats with hydraulic steering, which can have many turns lock to lock.
|
|
For Yachts up to 39ft - Simrad Tillerpilots are designed for high precision, reliable autosteering while drawing low current to optimise battery life.
High performance for small to mid range sailboats Simrad Tillerpilots are designed for high precision, reliable autosteering while drawing low current to optimise battery life. The hard wearing, waterproof body contains all controls and has been tested for many hours in total immersion. Exceptionally quiet in use, the Tillerpilot gives fast and positive performance for effective steering in a wide range of sea states and wind conditions. A range of pilots offers performance to suit most small to medium sailboats.
|
|
Boats 40-60 ft with hydraulic steering
Part No:
20620044: Autopilot instrument
20100001: Servo unit 1510
20330004: Rudder angle transmitter
20810054: Pumpset PF-0.3G
20640006: Compas transducer 45°
|
|
- Unparalleled "Adaptive" technology allows NAVpilot to continue improving your vessel's steering on every voyage
- Auto set-up and Self-learning for vessel speed and course
- Versatile, high-resolution LCDs allow for a variety of user-defined display configurations
- One-touch operation for Standby, Auto and Nav modes
- Exclusive FishHunter feature guides your vessel in orbit, figure eight or spiral maneuvers around fish targets
- Network up to six full-size NAVpilot-500, compact NAVpilot-511 and/or handheld NAVpilot-520 control units
- The NAVpilot-520 (handheld type) can work as a full-functioned remote control unit within a NAVpilot system
- Multi language: English, French, German, Italian, Portuguese and Spanish
- Optional junction box for NAVpilot 520 is available for remote operation
|
|
Boats 32-45 ft with mechanical steering
Part No:
20620044: Autopilot instrument
20100001: Servo unit 1510
20330004: Rudder angle transmitter
20820012: Integrated linear drive unit
20640006: Compas transducer 45°
|
|
By adjusting the backstay tension, you can increase your boat speed and point higher. Holmatro integral adjusters enable you to alter the backstay tension accurately and quickly. Holmatro backstay adjusters are made of lightweight aluminium and have the only two-speed integrated pump.
- Integrated single-speed pump
A single-speed pump means compact design and easy to reach maximum tension.
- Lightweight
Advanced design techniques and materials keep the weight to a minimum.
- Luminant pressure gauge
Makes reading the pressure gauge easy, even in the dark.
- Various colour options
Standard clear anodized aluminium finish. Black anodized or other colours optional.
|
|
|
Ergonomics meets economics. The new Series 8 Integral Backstay Adjuster incorporates several key design improvements. The pressure gauge is positioned prominently, enabling fast, accurate reading of tension values. A longer pump handle produces faster pumping motion and more tension per stroke, which delivers greater performance out of modern masts. The feed tube is seated into the contour of the cylinder, resulting in a more secure design and integrated look. And its cost has remained highly competitive. In testing, the Navtec Series 8 Integral enabled sailors to increase rigging tension quickly, precisely, and easily. With each stroke of the handle, rake increased along with forestay tension, resulting in improved roller furling gear performance, sail shape, windward performance, and speed. Use of the specifically designed Integral toggle is strongly recommended.
|
|
| ... products without information |
| |
|
|
|
|
|
Varifold Propellers have taken the market by storm. Regularly fitted by such notable yacht building names as Baltic, Swan, Wally, Moody and Oyster, the complete range of Varifolds has a model for cruiser racing and racing yachts of every size. Varifold is revolutionary in design and brings a revolution to the yachts they are fitted to. Radical reductions in noise and vibration and excellent performance under engine, both ahead and astern, are the result of the propellers unique design. Varifolds have proper helical pitch distribution, including pitch reduction towards the blade tip. This pitch reduction 'unloads' the blade tips and, combined with the skewed blades, greatly reduces noisy pressure pulses against a yachts hull. While some other folding propellers have a helical pitch shape, few have proper sections or pitch distribution. None, put all these requirements into a complete package, except Varifold.
- Diameter 305mm to 432mm or 12" to 17"
- For engines rated to 50hp
- Available for shafts & saildrives
- Blades fold completely together for minimum drag
- Modern blade design with substantial blade area for smooth running and minimum noise & vibration
- Rubber bump stops minimise blade opening impact
|
|
Loos Professional Model Tension gauges perform cable tension readings accurately to within + or - 5% of the cable tension. They are the affordable answer to accurately measuring cable tension on sail boat standing rigging, guy wires, fences or any application where cable or wires are installed under load.
Manufactured of rigging anodized aluminum the Loos cable tension gauge is non corrosive and will give years of service. Detailed operating instructions are included with each tension gauge. Standing sailboat rigging can be adjusted while the tension gauge remains on the cable "just watch the pointer move"
|
|
The compact 3-3/4" (95mm) Saturn compass Model A149 is available with our exclusive NO-SPIN GlobalBalance® front reading card or flat card.
All Saturn® compasses feature an adjustable hood, compensators, and night illumination. Saturn® Bulkhead mount compasses feature an exclusive retractable light bar and 30° inclinometer. Saturn® compasses are the perfect choice for sailboat installation!
Front cover included.
|
|
A lightweight compass enclosed in a stylish and durable housing. The thick polycarbonate dome provides protection against the harsh marine environment and extreme temperature changes. This compass is balanced for 5 geographic zones, offers superior readability and is ideally suited to boats of 28-35 feet. This particular model is designed for bulkhead (vertical) mounting.
|
|
A compact and feature-packed compass offering superior readability. The numerous mounting alternatives make this compass a versatile navigational aid ideal for a wide variety of applications ranging from power boats and smaller sailboats to tactical racing sailing.
This compass is suitable for boats up to 30 feet and is designed for bulkhead or panel mounting.
|
|
|
The worlds most popular racing compass for dinghies! First developed for the popular Laser dinghy, it is admirably suitable for others as well. This compass comes with a bearing scale on both the horizontal and the vertical plane. The compass slides into the bracket for easy removal until your next winning race.
|
|
|
This great sailboat compass comes with a built-in heeling angle scale and three lubberlines for easy viewing from various positions. The globe assembly is recessed into the compass giving an almost flush front.
|
|
A lightweight compass enclosed in a stylish and durable housing. The thick polycarbonate dome provides protection against the harsh marine environment and extreme temperature changes. This compass is balanced for 5 geographic zones, offers superior readability and is ideally suited to boats of 28-35 feet. This particular model is designed for flush (horizontal) mounting.
|
|
CruiserTM compasses are available with a front-reading, 3-3/8" (86mm) apparent diameter NOSPIN GlobalBalance card or a front or flat reading card.
Designed for cruising class boats in the 18 to 30 foot range, all Cruiser compasses have crystalclear spherical domes, cross-bar compensators, and red night illumination.
|
|
Scout to be fixed on the boom, the bimini...
to light the COKPIT or the kitchen, the bathroom...
100% waterproof
Can be embedded in the lower track of the Boom, "flush"
6 led 1 hot Watt ultralumineuses bland
equivalent with a spotlight of 50-55 W traditional
consumption 8 W
food VARIVOLT 10 to 30 volt
7 m of cable and tight catch m/l
Dimensions:
Width: 29,40 mm
Width left to embed: 15,95 mm
Length: 235 mm
Height: 11 mm
|
|
SCOUT OF BOOM 4 LED 1w WARM WHITE, VARI, (angle 120°), 7 m cable 85,00 EUR (557,56 FF)
Scout to be fixed on the boom, the bimini...
to light the COKPIT or the kitchen, the bathroom...
100% waterproof
Can be embedded in the lower track of the Boom, "flush"
4 led 1 hot Watt ultralumineuses bland
equivalent with a spotlight of 30-35 W traditional
consumption 6 W
food VARIVOLT 10 to 30 volt
7 m of cable and tight catch m/l
Dimensions:
Width: 29,40 mm
Width left to embed: 15,95 mm
Length: 235 mm
Height: 11 mm
Reference: 04BOOM 4 VARI
|
|
SCOUT OF CHECHMATE 6 BLACK LED 1w WHITE, VARI (angle 60°) 95,00 EUR (623,16 FF)
As an indication, a traditional halogenous bulb of 50-55 W replaces
6 LED of power
Scout of Black CHECHMATE with integrated driver
Detailed description:
Diameter: 90 mm
Thickness: 18 mm
Tension: 10 to 30 V AC OR cd. (system of regulation integrated)
Consumption: 8 W
Lighting: White
Reference: 04MAT 6 VARI BLK
|
|
Multifunction housings for every type of electronical instruments to apply to the Solimar's steering systems or universal
Other available accessories:
Autopilot levers
Tiller caps & water/fuel caps in aluminium or stainless steel
Aluminium monolever engine box
Monolever engine box
Housings & cockpit tables
Leather or Lorica covers - kit do-it-yourself in leather or Lorica
Crosstree/bottle screw/winch covers in Lorica
Cover for steering system in plastic
|
|
Scanpod - Mast Pod
Our exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot controls onto yachts and powerboats.
- Simplified range – easy product selection
- Choice of two high gloss colours – new silver or traditional white
- Manufactured from acrylic capped ABS plastic – tough, durable and UV stable
- Tamper proof stainless fastenings – secure install without self-tapping into plastic
- Innovative watertight seal system – full instrument protection
- Supplied uncut to fit any display
Mast Pods
Install standard or larger 20/20 maxi style instruments at the mast for a clear view.
- Universal mount system fits a wide range of mast sizes
- Models to mount 2, 3 or 4 standard nav instruments
- Additional Carbon Mast Pod available to fit 3 x 20/20 maxi style instruments
|
|
|
|
|
|
|
TRIPOD BOAT STANDS
*SEVEN POWERBOAT SIZES (STRAIGHT HEAD) 12” TO 72” *FOUR SAILBOAT SIZES (ANGLED HEAD) 36” TO 84”
*STACKABLE AND/OR NESTABLE *CHROME PLATED SCREW RESISTS RUST
*TRIPOD DESIGN FOR GREATEST STABILITY *LARGE SURFACE BEARING AREA
Kleeco TRIPOD BOAT STAND PRICE LIST
Power Boat Stands
Stand Description Height Range 1-19 20-99 100-199 200+
SQJS Squat Power Boat Stand 12"-18" $65.00 $63.13 $58.50 $56.88
ESJS Extra Small Power Boat Stand 18"-24" $68.00 $62.90 $61.20 $59.50
SPBJ Small Power Boat Stand 24"-36" $72.00 $66.60 $64.80 $63.00
IPBJ Intermediate Power Boat Stand 30"-42" $75.00 $69.38 $67.50 $65.63
MPBJ Medium Power Boat Stand 36"-48" $82.00 $75.85 $73.80 $71.75
LPBJ Large Power Boat Stand 48"-60" $84.00 $77.70 $75.60 $73.50
XPBJ Extra Large Power Boat Stand 60"-72" $95.00 $90.25 $87.88 $85.50
Sailboat Stands
SSBJ Small Sail Boat Stand 36"-48" $88.00 $81.40 $79.20 $77.00
MSBJ Medium Sail Boat Stand 48"-60" $95.00 $90.25 $87.88 $85.50
LSBJ Large Sailboat Stand 60"-72" $110.00 $104.50 $101.75 $99.00
ELSBJ Extra Large Sail Boat Stand 72"-84" $140.00 $133.00 $129.50 $126.00
Heads Only (Flat or V) $42.50 $39.31 $38.25 $37.19
Stand Only (without Head) (-$10) (-$12) (-$14) (-$16)
*INCLUDES STANDARD SWIVEL HEAD AND HAND NUT
|
|
CL261 - Power Grip 1
Double your pulling power AND take the pain out of pulling smaller ropes. CL261 Power Grip 1 allows you to pull twice as hard compared to using your bare hands. For right or left handed use. The smoothly contoured hand grip area has been voted the most comfortable shape to fit all hand sizes.
Manufactured from high pressure die-cast aluminium for strength and durability.
For two handed use try our CL262.
|
|
|
Tug Handles The plastic handle fits permanently with a knot whereas the Clamcleat can be kept in your pocket and positioned anywhere along the line being pulled. Both enable you to pull at least twice the load compared to wrapping small ropes around your hand.
|
|
|
|