|
|
Powered Hinge System
Fully powered hinging system for Scanstrut Dual PowerTower and Satcom PowerTower.
- Reduces height for passing under brdges and for winter storage
- Remote operation
- Low profile mounting
- Fully watertight installation to IP67
- Cables run internally via watertight seal
- Easy to retro-fit to an existing installation
|
|
Based on our unique ellipse extrusion, Scanstrut's Aluminium PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Available in a forward leaning profile for radome installations and an aft leaning profile for open-array installations.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
Sleek and classy, the designer look of this four-way ratchet mount won't fail to catch your eye. Its simple lines come from a nutless design. This streamlined beauty has standard 1"-14 threads and a special cable slot that eliminates removal of most factory installed connectors. Easy on the eye, and super easy to use.
* Stainless steel construction
* Standard 1in-14 thread (male)
* Slot for cable feed-through
* Bolt holes: 5/16" dia,, 3" x 1½" on center
|
|
Offering a single "monocoque" structure for outstanding strength and surface finish, Scanstrut's Composite PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
NEW design for 350mm version - even greater strength to suit all new generation radomes.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
Custom Designs
Scanstrut is a recognised and respected supplier to several of the world’s best sail and power boat builders.
From a one-off mounting to a custom product range for a new boat model, Scanstrut will provide a complete design and build service for bespoke solutions.
Our experienced designers listen to your needs and develop the right solution to meet your exact installation requirements.
Scanstrut OEM projects have successfully:
- Reduced time & build costs
- Simplified stock holding
- Introduced technically superior products
To view a list of our current OEM products, please visit our website.
|
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas
|
|
Based on a unique ellipse extrusion, our new Satcom/tv PowerTower® is designed to raise your satcom antenna clear of obstructions, whilst minimising the footprint, allowing greater choice of antenna position.
> Options for all 30cm, 40cm and 60cm satcom/tv antennas.
> Hollow stem - cables routed neatly inside
> Antenna fastens to PowerTower® using antenna mounting
|
|
Space on board is always limited for installing satcom/tv antennas. Scanstrut Mounts eliminate this problem by reducing the mounting footprint size by up to 60%, providing greater choice of antenna position and a quick and easy installation.
These high quality installations guarantee maximum performance from your satcom antenna.
|
|
Scanstrut's Stainless PowerTower® is designed to elevate your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Created using a highly polished stainless steel, this makes a great looking installation on any boat.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
|
|
|
|
|
NEW Scanpod - Helm Pod
Our exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot controls onto yachts and powerboats.
- Simplified range – easy product selection
- Choice of two high gloss colours – new silver or traditional white
- Manufactured from acrylic capped ABS plastic – tough, durable and UV stable
- Tamper proof stainless fastenings – secure install without self-tapping into plastic
- Innovative watertight seal system – full instrument protection
- Supplied uncut to fit any display
Helm Pods
Install chartplotter, radar displays, instrument and autopilot controls onto your sailboat.
- Models to fit 8”, 10”, 12” and 15” displays
- Two case depths, shallow & deep - compact mounting of displays
- Universal fit to 9.5” and 12” centre pedestal guards – easy product selection
- Option to install additional instruments at the helm
See 'Flex-Mount System' accessory for installations on twin helms and low rails.
|
|
Scanpod - Deck Pod
Our exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot controls onto yachts and powerboats.
- Simplified range – easy product selection
- Choice of two high gloss colours – new silver or traditional white
- Manufactured from acrylic capped ABS plastic – tough, durable and UV stable
- Tamper proof stainless fastenings – secure install without self-tapping into plastic
- Innovative watertight seal system – full instrument protection
- Supplied uncut to fit any display
Deck Pods
A range of universal pods to install displays onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.
- Swivel / tilt base – provides level mount on any angled slopes and locks / unlocks into position
- Models to fit 8”, 10” and 12” displays
|
|
Scanpod - Mast Pod
Our exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot controls onto yachts and powerboats.
- Simplified range – easy product selection
- Choice of two high gloss colours – new silver or traditional white
- Manufactured from acrylic capped ABS plastic – tough, durable and UV stable
- Tamper proof stainless fastenings – secure install without self-tapping into plastic
- Innovative watertight seal system – full instrument protection
- Supplied uncut to fit any display
Mast Pods
Install standard or larger 20/20 maxi style instruments at the mast for a clear view.
- Universal mount system fits a wide range of mast sizes
- Models to mount 2, 3 or 4 standard nav instruments
- Additional Carbon Mast Pod available to fit 3 x 20/20 maxi style instruments
|
|
|
|
|
|
|
Frejus, France – SEAVIEW by PYI is pleased to announce the release of the new Seaview Instrument Pods, which will be available in early 2010. These instrument pods are constructed with a high quality marine grade anodized aluminum base and UV resistant white ABS plastic housing. Full adjustment both horizontally and vertically is easily executed with the polished stainless steel quick release handle, easily accessible on the Seaview Pod display housing. This feature is not only functional & efficient but provides a clean, professional look in your helm station. The units special gasket ensures a water tight and secure installation. Seaview Pods are available pre-cut, un-cut or customizable to your specific application.
Seaview offers an electronic installation solution for any application on both Sail & Power boat, servicing both pleasure & commercial craft. Seaview offers a full range of standard and custom-mounting solutions for the growing market of radar, telecommunication & vision related marine products. As always, our primary goal is to provide our customers with quality products, innovative solutions & customer service second to none. Please contact Seaview for additional information or if you have any questions and visit our website to see the full line of Seaview products.
|
|
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks.
|
|
Multifunction housings for every type of electronical instruments to apply to the Solimar's steering systems or universal
Other available accessories:
Autopilot levers
Tiller caps & water/fuel caps in aluminium or stainless steel
Aluminium monolever engine box
Monolever engine box
Housings & cockpit tables
Leather or Lorica covers - kit do-it-yourself in leather or Lorica
Crosstree/bottle screw/winch covers in Lorica
Cover for steering system in plastic
|
|
Stainless Steel Ratchet Mount
Four-way ratchet design for deck or side mounting.
Quick release lever allows antenna fold-down
Sturdy construction, quality finish
Suitable for all powerboat antennas
Standard 1" x 14 TPI thread
Hardware: sold separately
Feedhole: Special Cable Slot
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
|
Seaview modular mast are available in 3 and 4" diameter aluminium tube. There are adapted for any kind of Radar, TV and Satcom antennas. They can have either a fix, ajustable or thru deck fitting. Accessories will complete the unit will lights, davit for HB engine....They are cut to the request lenght from 50 cm up to 5 Meter.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
