|
|
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
Aqua Jet Flow Master 5.0 WPS
The ideal choice for pressurizing water in a closed system. The digital controller adjusts water flow as the demand is increased and decreased while maintaining a very smooth flow. The unique variable flow feature of the Flow Master pump allows the pump to be mounted without an accumulator tank and still maintain an even flow regardless if one or multiple taps are being used.
|
|
Aqua Jet WPS 2.4, 2.9, 3.5, 4.0 & 5.2 - Aqua Jet Water Pressure Systems
The five chamber Aqua Jet WPS-series provides a reliable heart for small boat and recreational vehicle water pressure systems. Compared to conventional three or four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water pulsation characteristics.
It is recommended to install the WPS-pumps with an accumulator tank. Always use a PUMProtector inlet strainer before the pump intake.
|
|
Aqua Jet Uno WPS 3.5 & 5.2
Medium demand unit with a single Aqua Jet WPS capacity 13 l/min or 20 l/min fixed on a base with PUMProtector inlet strainer and a 2 litres pre-pressurized accumulator tank.
Aqua Jet Duo WPS
High demand unit with two parallel-connected Aqua Jet WPS capacity 40 l/min fixed on a base with PUMProtector inlet strainers and a 2 litres pre-pressurized accumulator tank.
Aqua Jet Uno Max WPS 2.9 & 3.5
Medium demand unit with a single Aqua Jet WPS with capacity 11 or 13 l/min fixed on a wooden panel for easy and efficient installation. The unit includes a PUMProtector inlet strainer and a 2 litres pre-pressurized accumulator tank.
|
|
Features:
%u2022 Integrated pump and tank system
%u2022 May be mounted vertically or horizontally
%u2022 Flow rates up to 4.5 US Gallons/min (17 Lires/min)
%u2022
Specifications:
Voltage Options 12,24,32 & 115v
Flow Rate Flow rates up to 4.5 US Gallons/min (17 Lires/min);
Max. Pressure 40psi (2.8bar)
Port Type 1/2" hose barb
Strainer Included
|
|
• Integrated pump and tank system
• May be mounted vertically or horizontally
• Flow rates up to 4.5 US Gallons/min (17 Lires/min)
|
|
| ... products without information |
| |
|
Stainless Steel lid and all wetted parts in lid assembly including fluid tube, lid bushing, outlet elbow and fitting, agitator shaft with Zinc plated tank shell, plus one liner. Single Reg. No Agit. 83Z-210 Double Reg. No Agit. 83Z-220 Single Reg. Std Agit. 83Z-211 Double Reg. Std Agit. 83Z-221 83Z221 shown
|
|
- Binks Pressure Tanks -
ASME Code Stainless Steel, Galvanized and PT Series Tanks
The only reliable code tanks available in the marketplace that meet OSHA regulations when using flammable and combustible materials.
|
|
Units of transport and transfer of fuel, tanks capacities from 250 to 920 liters.
Made out of carbon steel ST 44-2 and completion in Epoxy paint, with brise-flots inside and pressure valve.
Approved according to the safety requirements ONE & ADR for transport on roads;
Units intended to transport gasoline for supply of the helicopters, planes, kart, jet ski, engines except edge, motor bike-snow, mowers, etc...
They are easy to charge on a trailer or on a utility thanks to the metal structure which wraps them and protects them.
|
|
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
|
|
see the results for the following category : 
