|
|
• Efficient high volume air flow
• Quiet operation
• Low amp draw
• Slip on inlet and outlet ducting connections
• Sealed motor shaft for moisture protection
• Corrosion resistant nikel plated motor housing
• ABYC-H2
• ISO 9097:8846
• IMCI (CE)
• N.M.M.A. type accepted
• USCG 183.410 Compliant, Ignition protected
|
|
QL In-Line blowers provide ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high outputoperation, these blowers features front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, QL In-Line blowers provide higher air flow, lower amp draw and quieter operation than standard blowers.
The QL In-Line blower is designed for easy installation. It may be positioned anywhere along the length of ducting leading to the area being ventilated. The blower may be secured to any solid, flat mounting surface and oriented in any direction. NB. For maximum motor protection, it is best to mount the blower where it will not be exposed to moisture from spray or deck wash and slightly inclined so any moisture will drain back to the lower end of the duct run.
|
|
Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors.
- Nickel-plated motor can for corrosion resistance
- Stiffening ribs to reduce housing distortion
- Motor cap to seal wires and motor for water resistance
|
|
· Built to withstand extreme conditions
· Outstanding air circulation
· Rugged construction
- Weather resistant
- Extruded aluminum body
- UV stabilized plastic
- Stainless fasteners
· Equipped with Cam Lock suction cup for quick mounting and bracket for permanent mounting
· Adjustable tilting head
- Cam Lock tilt mechanism holds fan in any position
· Ultra low current draw, only 0.4 amps
· Variable speed, long-life motor
· Available in 12 or 24 volt, black or white
· Two year warranty
|
|
· A Breeze to install and operate
· Single speed fan designed for quieter operation
· Touch control on face of fan
· Locking flex-mount ensures easy positioning and stowing
· Fully guarded on back for greater safety
· 2000+ Hour motor
· Installation: Direct wire to 3 amp circuit
· Draw: 0.34 amps
· Blade: 5"
· Dimensions 8.5"H x 6" W 2.5"D
· Material: UV PP
· Available in white only
· One year warranty
|
|
· Same as 747 except permanent screw down base, no plug, ready to wire in
· Spring loaded swivel base
· Only draws .59 amps
· Comes with 3 feet of lead wire
· High speed 270 CFM, low speed 144 CFM
· Available in white only
· One year warranty
|
|
· Perfect for the sleep cabin, salon, cockpit or galley
· Most powerful and quietest in class
· Safe and easy to operate
· Touch Controls
· Full grills on both front and back
· 3 Speeds
· Built in handle for easy positioning
· Fan can be swiveled side to side as well as up and down
· Long-life motor 5000+ hour
· Blade 5"
· Draw: 0.25 amps on high
· Dimensions: 9" H x 6.25"W x 3.625" D
· Material: UV FR ABS
· Available in 12 or 24 volt, black or white
· Two year warranty
|
|
· 7" 'finger-safe' blade
· Two speeds
· Lighter plug adapter
· Suction cup and screw down base
· High speed 270 CFM, low speed 144 CFM
· Available in black or white
· One year warranty
|
|
· Superior marine and RV cabin comfort
· Limitless positioning, the unique gimbaled design allows full 360 degree rotation
· Stows flat and compact when not in use
· Ultra low current, draws less than 0.4 amps
· Battery saver timer shuts fan off in two hour increments. If voltage should drop below 10.5 volts fan will not operate.
· Quiet operation
· Finger safe blade
· 3 speeds
· Available in 12 or 24 volt, black or white
· Two year warranty
|
|
| ... products without information |
| |
| ... products without information |
| |
| ... products without information |
| |
"The QL air heater extracts heat from the engine's cooling system, which would otherwise be wasted, and transfers it into the cabin. A fan circulates air th-rough a heat exchanger, which is heated by the engine cooling system. The air heater makes it possible to make use of the engine closed-circuit cooling system without additional water piping and radiators.
Transferring the heat through a heat exchanger allows the heated air to be quickly sent to where it's needed most. For example to defrost/demist the windshield, or warm up the cabin. Four outlets are supplied that can be connec-ted to air hoses. The standard outlets are 55 mm diameter. The airflow can be set at three different speeds. The QL air heater is highly efficient and can be in-stalled vertically or horizontally."
|
|
| ... products without information |
| |
|
|
